[U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register

[Timo Ketola]

The USB controller in i.MX25 has a PORTSCx registers which should be
set. In this regard it is similar to the controller in i.MX31. As this
file is compiled only with i.MX25 and -31, #ifdef check can be removed.

Signed-off-by: Timo Ketola <timo at exertus.fi>
---

Changes in v4:
- Reworded subject to shorten it
- Added commit message
- Changed the fix from adding i.MX25 to removing the check altogether

Changes in v2:
- Dropped patches 2, 3 and 6 so this one changed from 8 to 5
- Rebased to u-boot-imx next

 drivers/usb/host/ehci-mxc.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 61dbccd..7384580 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -125,11 +125,9 @@ int ehci_hcd_init(void)
 	hcor = (struct ehci_hcor *)((uint32_t) hccr +
 			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 	setbits_le32(&ehci->usbmode, CM_HOST);
-#ifdef CONFIG_MX31
 	setbits_le32(&ehci->control, USB_EN);
 
 	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
-#endif
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 
 	udelay(10000);
-- 
1.7.5.4