[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules

[Scott Wood]

On 04/03/2012 07:28 AM, Stefano Babic wrote:
> On 03/04/2012 07:26, Gachet Daniel wrote:
>> Hi Stefano,
>
> Hi Daniel,
>
>>
>> No problem, I will do it with the inverse logic, using a
>> CONFIG_NAND_MXC_NFC_TWO_CYCLES, and adapt the tx25.h file. But could
>> you tell me in which README file I should add the description for
>> that switch? I have a look at all README, but no one has any
>> description about NAND flash configuration flags (like
>> CONFIG_NAND_MXC, CONFIG_NAND_MXC_V1_1  or CONFIG_MXC_NAND_HWECC).
>
> You have found missing documentation ;-(. Maybe it was not checked
> before, but you're right: there is no documentation for this driver.
> Even worse, there is no "NAND Support" at all.
>
> Please feel free to add a section. I think the right place is under "Low
> Level (hardware related) configuration options", adding a part for the
> MXC Nand driver. And if you want to integrate it with the missing
> documentation for the other CONFIG_NAND_MXC options, it will be highly
> appreciated.

There is doc/README.nand that would be appropriate for this, or it could 
go in an MXC-specific file.

-Scott