[U-Boot] Pull request: u-boot-staging

[Wolfgang Denk]

Dear Anatolij Gustschin,

In message <20120430170327.30bf1463 at wker> you wrote:
> Hello Wolfgang,
> 
> The following changes since commit 330a091c11d48539cc5cbaab708514fe7b386f8c:
> 
>   patman: Change the location of patman path (2012-04-30 09:57:48 +0200)
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-staging.git agust at denx.de
> 
> Eric Nelson (2):
>       part_dos: align disk buffers on cache line to enable DMA and cache
>       fs/fat: align disk buffers on cache line to enable DMA and cache
> 
> Mike Frysinger (4):
>       gunzip: rename z{alloc, free} to gz{alloc, free}
>       lin_gadget: use common mdelay
>       linux/compat.h: rename from linux/mtd/compat.h
>       lin_gadget: use common linux/compat.h
> 
>  board/samsung/smdkc100/onenand.c          |    2 +-
>  common/cmd_onenand.c                      |    2 +-
>  common/env_onenand.c                      |    2 +-
>  disk/part_dos.c                           |    6 +++---
>  drivers/mtd/mtdconcat.c                   |    2 +-
>  drivers/mtd/mtdcore.c                     |    2 +-
>  drivers/mtd/mtdpart.c                     |    2 +-
>  drivers/mtd/nand/mpc5121_nfc.c            |    2 +-
>  drivers/mtd/nand/nand_base.c              |    2 +-
>  drivers/mtd/nand/nand_bbt.c               |    2 +-
>  drivers/mtd/onenand/onenand_base.c        |    2 +-
>  drivers/mtd/onenand/onenand_bbt.c         |    2 +-
>  drivers/mtd/onenand/onenand_uboot.c       |    2 +-
>  drivers/mtd/onenand/samsung.c             |    2 +-
>  drivers/usb/gadget/s3c_udc_otg.c          |    5 +++--
>  drivers/usb/gadget/s3c_udc_otg_xfer_dma.c |    2 +-
>  fs/cramfs/uncompress.c                    |    7 ++-----
>  fs/fat/fat.c                              |   22 ++++++++++++----------
>  fs/jffs2/jffs2_1pass.c                    |    2 +-
>  include/linux/{mtd => }/compat.h          |    3 +++
>  include/linux/err.h                       |    2 +-
>  include/linux/mtd/mtd-abi.h               |    2 +-
>  include/linux/mtd/nand.h                  |    2 +-
>  include/linux/mtd/onenand.h               |    2 +-
>  include/nand.h                            |    2 +-
>  include/u-boot/zlib.h                     |    3 +++
>  include/usb/lin_gadget_compat.h           |   16 ++--------------
>  lib/gunzip.c                              |   11 ++++-------
>  28 files changed, 52 insertions(+), 61 deletions(-)
>  rename include/linux/{mtd => }/compat.h (92%)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The ultimate barrier is one's viewpoint.
                        - Terry Pratchett, _The Dark Side of the Sun_