[U-Boot] [PATCH] i.MX2: Support splash screen
Anatolij Gustschin
agust at denx.de
Thu Apr 26 13:51:02 CEST 2012
On Wed, 18 Apr 2012 11:54:21 +0300
"Timo Ketola" <timo at exertus.fi> wrote:
> Signed-off-by: Timo Ketola <timo at exertus.fi>
> ---
> arch/arm/include/asm/arch-mx25/imx-regs.h | 29 +++++++++
> drivers/video/Makefile | 1 +
> drivers/video/mx2fb.c | 92 +++++++++++++++++++++++++++++
> include/lcd.h | 21 ++++++-
> include/mx2fb.h | 39 ++++++++++++
> 5 files changed, 181 insertions(+), 1 deletions(-)
> create mode 100644 drivers/video/mx2fb.c
> create mode 100644 include/mx2fb.h
...
> diff --git a/drivers/video/mx2fb.c b/drivers/video/mx2fb.c
> new file mode 100644
> index 0000000..9ee4a3e
> --- /dev/null
> +++ b/drivers/video/mx2fb.c
> @@ -0,0 +1,92 @@
Please add Copyright info here.
> +#include <common.h>
> +#include <lcd.h>
> +#include <mx2fb.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/io.h>
> +#include <asm/errno.h>
> +
> +#if !defined(LCD_BPP) || LCD_BPP != LCD_COLOR16
> +
> +#error Only 16bpp is supported
> +
> +#endif
Drop empty lines around #error
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void *lcd_base; /* Start of framebuffer memory */
> +void *lcd_console_address; /* Start of console buffer */
> +
> +int lcd_line_length;
> +int lcd_color_fg;
> +int lcd_color_bg;
> +
> +short console_col;
> +short console_row;
> +
> +
> +void lcd_initcolregs(void)
> +{
> +}
> +
> +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
> +{
> +}
> +
> +void lcd_enable(void)
> +{
> +}
> +
> +void lcd_disable(void)
> +{
> +}
> +
> +void lcd_panel_disable(void)
> +{
> +}
> +
> +void lcd_ctrl_init(void *lcdbase)
> +{
> + u32 ccm_ipg_cg, pcr;
> + struct lcdc_regs *lcdc = (struct lcdc_regs *)IMX_LCDC_BASE;
> + struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
> +
> + writel(gd->fb_base, &lcdc->lssar);
> + writel(panel_info.vl_col >> 4 << 20 | panel_info.vl_row, &lcdc->lsr);
> + writel(panel_info.vl_col / 2, &lcdc->lvpwr);
> + if (panel_info.vl_bpix != 4)
> + printf("Unsupported color depth (%d), only 16bpp supported\n",
> + NBITS(panel_info.vl_bpix));
Style issue: multi-line if statements should use braces
if (cond) {
multi-line
statement
}
> + pcr = LCDC_LPCR | 5 << 25;
> +
> + if (panel_info.vl_sync & FB_SYNC_CLK_LAT_FALL)
> + pcr |= 0x00200000;
> + if (panel_info.vl_sync & FB_SYNC_DATA_INVERT)
> + pcr |= 0x01000000;
> + if (panel_info.vl_sync & FB_SYNC_SHARP_MODE)
> + pcr |= 0x00000040;
> + if (panel_info.vl_sync & FB_SYNC_OE_LOW_ACT)
> + pcr |= 0x00100000;
> +
> + pcr |= LCDC_LPCR_PCD;
> +
> + writel(pcr, &lcdc->lpcr);
> + writel((panel_info.vl_hsync - 1) << 26 |
> + (panel_info.vl_right_margin - 1) << 8 |
> + (panel_info.vl_left_margin - 3),
Please remove two tabs here,
> + &lcdc->lhcr);
and one tab here.
> + writel(panel_info.vl_vsync << 26 |
> + panel_info.vl_lower_margin << 8 |
> + panel_info.vl_upper_margin,
> + &lcdc->lvcr);
ditto.
> + writel(LCDC_LSCR, &lcdc->lscr);
> + writel(LCDC_LRMCR, &lcdc->lrmcr);
> + writel(LCDC_LDCR, &lcdc->ldcr);
> + writel(LCDC_LPCCR, &lcdc->lpccr);
> +
> + /* Off and on clock gating
> + FIXME: Why *off* and on; What side effects does it have? */
Style for multi-line comments is
/*
* multi-line
* comment
*/
> + ccm_ipg_cg = readl(&ccm->cgr1);
> +
> + writel(ccm_ipg_cg & 0xDFFFFFFF, &ccm->cgr1);
> + writel(ccm_ipg_cg | 0x20000000, &ccm->cgr1);
> +}
...
> diff --git a/include/mx2fb.h b/include/mx2fb.h
> new file mode 100644
> index 0000000..1f16a61
> --- /dev/null
> +++ b/include/mx2fb.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
> + */
> +
> +/*
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
Please consider Stefano's comment regarding copyright header.
> +
> +#ifndef __MX2FB_H__
> +#define __MX2FB_H__
> +
> +
please drop one empty line here.
> +/* LCDC register settings */
> +
> +#define LCDC_LSCR 0x00120300
> +
> +#define LCDC_LRMCR 0x00000000
> +
> +#define LCDC_LDCR 0x00020010
> +
> +#define LCDC_LPCCR 0x00a9037f
> +
> +#define LCDC_LPCR 0xFA008B80
> +
> +#define LCDC_LPCR_PCD 0x4
Please use the same style here as below, so remove
empty lines and indent numbers by tab.
> +
> +#define FB_SYNC_OE_LOW_ACT 0x80000000
> +#define FB_SYNC_CLK_LAT_FALL 0x40000000
> +#define FB_SYNC_DATA_INVERT 0x20000000
> +#define FB_SYNC_CLK_IDLE_EN 0x10000000
> +#define FB_SYNC_SHARP_MODE 0x08000000
> +#define FB_SYNC_SWAP_RGB 0x04000000
> +
> +#endif
Thanks,
Anatolij
More information about the U-Boot
mailing list