[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings

[Dirk Behme]

Hi Eric,

On 26.04.2012 01:50, Eric Nelson wrote:
> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
>
> ---
> V2 has been stripped of the board-independent changes and
> uses clrsetbits_le32() instead of twiddling bits by hand.
>
> V3 returns immediately from setup_sata() if enable_sata_clock()
> returns an error.
>
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   32 +++++++++++++++++++++++++
>   include/configs/mx6qsabrelite.h               |   13 ++++++++++
>   2 files changed, 45 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> index 1d09a72..c9a108f 100644
> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> @@ -25,6 +25,8 @@
>   #include<asm/arch/imx-regs.h>
>   #include<asm/arch/mx6x_pins.h>
>   #include<asm/arch/iomux-v3.h>
> +#include<asm/arch/ccm_regs.h>

Do we need ccm_regs.h here?

Best regards

Dirk