[U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux

[Dirk Behme]

A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound
on the SabreLite board. To make this work, U-Boot has to configure the
pin mux for PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly.

Taken from Freescale's ER5 U-Boot for the SabreLite.

Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
CC: Troy Kisky <troy.kisky at boundarydevices.com>
CC: Stefano Babic <sbabic at denx.de>
---
 board/freescale/mx6qsabrelite/imximage.cfg |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg
index 62498ab..2d7825a 100644
--- a/board/freescale/mx6qsabrelite/imximage.cfg
+++ b/board/freescale/mx6qsabrelite/imximage.cfg
@@ -168,3 +168,6 @@ DATA 4 0x020e0010 0xF00000CF
 # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
 DATA 4 0x020e0018 0x007F007F
 DATA 4 0x020e001c 0x007F007F
+# set PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2
+DATA 4 0x020e0220 0x00000000
+DATA 4 0x020e022c 0x00000004
\ No newline at end of file
-- 
1.7.0.4