August 2012 Archives by subject
Starting: Wed Aug 1 04:31:14 CEST 2012
Ending: Fri Aug 31 23:37:48 CEST 2012
Messages: 3190
- [U-Boot] ./MAKEALL arm is buggy
Allen Martin
- [U-Boot] 32-bit OS on 64-bit core
Robert Thorhuus
- [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 02/16] add cpu/mips64/Makefile
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 02/16] add cpu/mips64/Makefile
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 05/16] add cpu/mips64/interrupts.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 05/16] add cpu/mips64/interrupts.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 07/16] add cpu/mips64/time.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 07/16] add cpu/mips64/time.c
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 09/16] add cache description struct
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 09/16] add cache description struct
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 10/16] modify io operation for mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 10/16] modify io operation for mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 13/16] add board define in boards.cfg
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 13/16] add board define in boards.cfg
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot
Daniel Schwierzeck
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Zhi-zhou Zhang
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Zhi-zhou Zhang
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Zhi-zhou Zhang
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Mike Frysinger
- [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c
Zhi-zhou Zhang
- [U-Boot] [[Patch V2] mips: 08/16] Let UNCACHED_SDRAM be available to mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 08/16] Let UNCACHED_SDRAM be available to mips64
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 11/16] Make size_t equaled to unsigned long
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 11/16] Make size_t equaled to unsigned long
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64
Andrew Dyer
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Andrew Dyer
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Zhi-zhou Zhang
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Daniel Schwierzeck
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Daniel Schwierzeck
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script
Zhizhou Zhang
- [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h
Daniel Schwierzeck
- [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk
Daniel Schwierzeck
- [U-Boot] [BUG] disk drivers do not free private memory
Pavel Herrmann
- [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Albert ARIBAUD (U-Boot)
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 0/12] Add environment type checking and access control
Joe Hershberger
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Mike Frysinger
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Mike Frysinger
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Zhi-zhou Zhang
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Daniel Schwierzeck
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Zhi-zhou Zhang
- [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot
Zhi-zhou Zhang
- [U-Boot] [PATCH 0/1] fix some SPL debug builds.
Jeroen Hofstee
- [U-Boot] [PATCH 0/2 V3] EXYNOS5: Add MAX77686 support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2] Add gio api support to mx27
Philippe Reynes
- [U-Boot] [PATCH 0/2] Add gio api support to mx27 (v4)
Philippe Reynes
- [U-Boot] [PATCH 0/2] arm/km: configuration of the mv88e6352 switch on kmnusa
Valentin Longchamp
- [U-Boot] [PATCH 0/2] arm/km: configuration of the mv88e6352 switch on kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.
Markus Hubig
- [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.
Markus Hubig
- [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.
Andreas Bießmann
- [U-Boot] [PATCH 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS
Lukasz Majewski
- [U-Boot] [PATCH 0/2] net: Netconsole port configuration and filtering
Joe Hershberger
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Łukasz Dałek
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Marek Vasut
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Marek Vasut
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Łukasz Dałek
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Marek Vasut
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Łukasz Dałek
- [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver
Marek Vasut
- [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7
Tom Rini
- [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7
Stefano Babic
- [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7
Tom Rini
- [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7
Allen Martin
- [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support
Andreas Bießmann
- [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support
Andreas Bießmann
- [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash
Bo Shen
- [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash
Bo Shen
- [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash
Andreas Bießmann
- [U-Boot] [PATCH 0/3] MIPS: refactoring for extended Qemu support
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Lucas Stach
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Igor Grinberg
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Lucas Stach
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Stephen Warren
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Lucas Stach
- [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Stephen Warren
- [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards
Piotr Wilczek
- [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards
Piotr Wilczek
- [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards
Minkyu Kang
- [U-Boot] [PATCH 0/4] efikamx: update Efika MX support
Matt Sealey
- [U-Boot] [PATCH 0/4] efikamx: update Efika MX support
Marek Vasut
- [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature
Rajeshwari Shinde
- [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature
Rajeshwari Birje
- [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature
Minkyu Kang
- [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature
Simon Glass
- [U-Boot] [PATCH 0/4] Some patman fixes
Ilya Yanok
- [U-Boot] [PATCH 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH 0/5] *** Qualcomm chipset support patches ***
Srikanth Reddy Vintha
- [U-Boot] [PATCH 0/5] *** Qualcomm chipset support patches ***
Srikanth Reddy Vintha
- [U-Boot] [PATCH 0/5] Cleanup and extend env vars
Benoît Thébaudeau
- [U-Boot] [PATCH 0/5] light updates of common pci code; some pci ids
Wolfgang Denk
- [U-Boot] [PATCH 0/5] light updates of common pci code; some pci ids
Andrew Sharp
- [U-Boot] [PATCH 0/5] Make iim support common to mpc and imx
Benoît Thébaudeau
- [U-Boot] [PATCH 0/6 v2] Code cleaup for trats and universal
Piotr Wilczek
- [U-Boot] [PATCH 0/6] gpt: GUID Partition Table (GPT) restoration
Lukasz Majewski
- [U-Boot] [PATCH 0/6] net: ASIX AX88772B enablement
Lucas Stach
- [U-Boot] [PATCH 0/6] net: ASIX AX88772B enablement
Marek Vasut
- [U-Boot] [PATCH 0/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 0/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 0/7 V3] EXYNOS5: Enable SPI support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
Rajeshwari Birje
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Marek Vasut
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Marek Vasut
- [U-Boot] [PATCH 0/8] video: support newly exynos5 display feature
Minkyu Kang
- [U-Boot] [PATCH 0/9 V2] EXYNOS5: Add Audio support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/9] Auto partition selection and fs partition consolidation
Rob Herring
- [U-Boot] [PATCH 0/9] EXYNOS5: Add Audio support
Rajeshwari Shinde
- [U-Boot] [PATCH 00/10] mx5: Fix clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized
Yann Vernier
- [U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board
Tom Rini
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP
Stefan Roese
- [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP
Stefano Babic
- [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP
Stefan Roese
- [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll()
Benoît Thébaudeau
- [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll()
Stefano Babic
- [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
Tom Rini
- [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
Linus Walleij
- [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
Tom Rini
- [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART
Yann Vernier
- [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500
York Sun
- [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500
Scott Wood
- [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500
York Sun
- [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500
Scott Wood
- [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board
Tom Rini
- [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board
Tom Rini
- [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board
Mathieu Poirier
- [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board
Tom Rini
- [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env
Mike Frysinger
- [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env
Joe Hershberger
- [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env
Joe Hershberger
- [U-Boot] [PATCH 01/13] Blackfin: BF60x: new processor header files
Bob Liu
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Stefano Babic
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Stefano Babic
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Stefano Babic
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Scott Wood
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions
Stefano Babic
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Marek Vasut
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Stephen Warren
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Marek Vasut
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Stephen Warren
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Marek Vasut
- [U-Boot] [PATCH 01/14] smdk6400: Move smdk6400 board from Makefile to boards.cfg
Zhong Hongbo
- [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port
Bob Liu
- [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port
Mike Frysinger
- [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port
Bob Liu
- [U-Boot] [PATCH 01/17] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH 01/17] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Stefano Babic
- [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names
Benoît Thébaudeau
- [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names
Marek Vasut
- [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names
Benoît Thébaudeau
- [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values
Yann Vernier
- [U-Boot] [PATCH 02/11] powerpc/mpc85xx: setup stash id for L1 and L2 cache
York Sun
- [U-Boot] [PATCH 02/12] tools/env: Remove unneeded complexity
Joe Hershberger
- [U-Boot] [PATCH 02/12] tools/env: Remove unneeded complexity
Mike Frysinger
- [U-Boot] [PATCH 02/13] Blackfin: bf60x: add serial support
Bob Liu
- [U-Boot] [PATCH 02/13] mxc nand: cosmectic: Light cleanup
Benoît Thébaudeau
- [U-Boot] [PATCH 02/13] mxc nand: cosmectic: Light cleanup
Stefano Babic
- [U-Boot] [PATCH 02/14] dm: Add Driver cores design document
Marek Vasut
- [U-Boot] [PATCH 02/14] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port
Bob Liu
- [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port
Mike Frysinger
- [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port
Bob Liu
- [U-Boot] [PATCH 02/17] am335x_evm: Update config for common usage
Tom Rini
- [U-Boot] [PATCH 02/17] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions
Marek Vasut
- [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions
Marek Vasut
- [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment
Yann Vernier
- [U-Boot] [PATCH 03/11] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2
York Sun
- [U-Boot] [PATCH 03/12] tools/env: Don't call env_init() in fw_getenv()
Joe Hershberger
- [U-Boot] [PATCH 03/13] Blackfin: bf60x: add dma support
Bob Liu
- [U-Boot] [PATCH 03/13] spl mxc nand: Merge duplicated code
Benoît Thébaudeau
- [U-Boot] [PATCH 03/13] spl mxc nand: Merge duplicated code
Stefano Babic
- [U-Boot] [PATCH 03/14] dm: Add GPIO API transition document
Marek Vasut
- [U-Boot] [PATCH 03/14] S3C64XX: Use readl/writel to operate uart
Zhong Hongbo
- [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page
Bob Liu
- [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page
Mike Frysinger
- [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page
Bob Liu
- [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page
Mike Frysinger
- [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib
Tom Rini
- [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib
Stefano Babic
- [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib
Tom Rini
- [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib
Stefano Babic
- [U-Boot] [PATCH 04/10] mx5 clocks: Fix get_lp_apm()
Benoît Thébaudeau
- [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support
Yann Vernier
- [U-Boot] [PATCH 04/11] powerpc/mpc85xx: check number of cores
York Sun
- [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes
Mike Frysinger
- [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes
Joe Hershberger
- [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes
Mike Frysinger
- [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes
Joe Hershberger
- [U-Boot] [PATCH 04/13] Blackfin: Bf60x: support big cplb page
Bob Liu
- [U-Boot] [PATCH 04/13] spl mxc nand: Remove duplicated code
Benoît Thébaudeau
- [U-Boot] [PATCH 04/14] dm: Add MMC subsystem analysis
Marek Vasut
- [U-Boot] [PATCH 04/14] S3C64XX: add pwm for s3c64xx support
Zhong Hongbo
- [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit
Mike Frysinger
- [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit
Bob Liu
- [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit
Bob Liu
- [U-Boot] [PATCH 04/17] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH 05/10] mx5 clocks: Fix get_periph_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Yann Vernier
- [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address
York Sun
- [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address
Scott Wood
- [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address
York Sun
- [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address
Scott Wood
- [U-Boot] [PATCH 05/12] tools/env: Serialize calls to fw_*env
Joe Hershberger
- [U-Boot] [PATCH 05/12] tools/env: Serialize calls to fw_*env
Mike Frysinger
- [U-Boot] [PATCH 05/13] Blackfin: bf60x: add rsi/sdh support
Bob Liu
- [U-Boot] [PATCH 05/13] spl mxc nand: Set symmetric mode
Benoît Thébaudeau
- [U-Boot] [PATCH 05/14] dm: Add networking subsystem analysis
Marek Vasut
- [U-Boot] [PATCH 05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer
Zhong Hongbo
- [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit
Bob Liu
- [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit
Mike Frysinger
- [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit
Bob Liu
- [U-Boot] [PATCH 05/17] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/
Albert ARIBAUD
- [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/
Tom Rini
- [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/
Marek Vasut
- [U-Boot] [PATCH 06/10] mx5 clocks: Fix get_ipg_per_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation
Yann Vernier
- [U-Boot] [PATCH 06/11] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2
York Sun
- [U-Boot] [PATCH 06/12] env: Make the "silent" env var take effect immediately
Mike Frysinger
- [U-Boot] [PATCH 06/12] env: Make the "silent" env var take effect immediately
Joe Hershberger
- [U-Boot] [PATCH 06/13] Blackfin: Bf609-ezkit: implement soft switch
Bob Liu
- [U-Boot] [PATCH 06/13] mxc nand: Access all ecc_status_result fields
Benoît Thébaudeau
- [U-Boot] [PATCH 06/14] dm: Add SPI API transition document
Marek Vasut
- [U-Boot] [PATCH 06/14] S3C64xx: mov cpu_init.S to the board directory
Zhong Hongbo
- [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch
Mike Frysinger
- [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch
Bob Liu
- [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch
Mike Frysinger
- [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch
Bob Liu
- [U-Boot] [PATCH 06/17] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()
Stefano Babic
- [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()
Stefano Babic
- [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM
Yann Vernier
- [U-Boot] [PATCH 07/11] powerpc/mpc85xx: expand SERDES reference clock select bit
York Sun
- [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.
Tom Rini
- [U-Boot] [PATCH 07/12] env: Update serial baudrate in env_relocate()
Joe Hershberger
- [U-Boot] [PATCH 07/13] Blackfin: Spi: add bf6xx spi driver
Bob Liu
- [U-Boot] [PATCH 07/13] spl mxc nand: Fix broken boot for correctable ECC errors
Benoît Thébaudeau
- [U-Boot] [PATCH 07/14] dm: Add block device document
Marek Vasut
- [U-Boot] [PATCH 07/14] S3C6400: Adopt SPL framwork to support spl for nand flash
Zhong Hongbo
- [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver
Bob Liu
- [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver
Mike Frysinger
- [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver
Bob Liu
- [U-Boot] [PATCH 07/17] omap-common: Fix typo in lowlevel_init.S::save_boot_params
Tom Rini
- [U-Boot] [PATCH 08/10] mx5 clocks: Simplify imx_get_cspiclk()
Benoît Thébaudeau
- [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1
Yann Vernier
- [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3
Andy Fleming
- [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3
York Sun
- [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3
York Sun
- [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2
Tom Rini
- [U-Boot] [PATCH 08/12] env: Check for NULL pointer in envmatch()
Joe Hershberger
- [U-Boot] [PATCH 08/12] env: Check for NULL pointer in envmatch()
Mike Frysinger
- [U-Boot] [PATCH 08/13] Blackfin: bf60x: add gpio support
Bob Liu
- [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()
Stefano Babic
- [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()
Benoît Thébaudeau
- [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()
Benoît Thébaudeau
- [U-Boot] [PATCH 08/14] dm: Add POWER API transition document
Marek Vasut
- [U-Boot] [PATCH 08/14] S3C6400: Delete nand_spl for S3C6400
Zhong Hongbo
- [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x
Bob Liu
- [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x
Mike Frysinger
- [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x
Bob Liu
- [U-Boot] [PATCH 08/17] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH 08/17] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Stefano Babic
- [U-Boot] [PATCH 09/10] mx5 clocks: Fix eSDHC clock
Benoît Thébaudeau
- [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch
Yann Vernier
- [U-Boot] [PATCH 09/11] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2
York Sun
- [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
Tom Rini
- [U-Boot] [PATCH 09/12] env: Clarify the cases for env set
Joe Hershberger
- [U-Boot] [PATCH 09/13] Blackfin: bf60x: core changes
Bob Liu
- [U-Boot] [PATCH 09/13] mtd mxc nand: Fix ECC state after read_page_raw_syndrome()
Benoît Thébaudeau
- [U-Boot] [PATCH 09/14] dm: Hwmon UDM subsystem analysis added.
Marek Vasut
- [U-Boot] [PATCH 09/14] S3C64XX: Change SROM init to use read/write operation
Zhong Hongbo
- [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support
Bob Liu
- [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support
Mike Frysinger
- [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support
Bob Liu
- [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured
Stefano Babic
- [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [Patch 1/17] add mips64 build configuration in mips/config.mk
Zhi-zhou Zhang
- [U-Boot] [Patch 1/17] add mips64 build configuration in mips/config.mk
Daniel Schwierzeck
- [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines
Troy Kisky
- [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines
Stefano Babic
- [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines
Stefano Babic
- [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).
Stefano Babic
- [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).
Tom Rini
- [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).
Jeroen Hofstee
- [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).
Tom Rini
- [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH 1/1] tegra20: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd
Troy Kisky
- [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd
Marek Vasut
- [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd
Marek Vasut
- [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd
Troy Kisky
- [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd
Marek Vasut
- [U-Boot] [PATCH 1/2 v2] net: punt bd->bi_ip_addr
Anatolij Gustschin
- [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686
Rajeshwari Birje
- [U-Boot] [PATCH 1/2 V3] PMIC: MAX77686: Add support for MAX77686
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] Add unlzma command
Joe Hershberger
- [U-Boot] [PATCH 1/2] Add unlzma command
Mike Frysinger
- [U-Boot] [PATCH 1/2] Add Vitesse VSC8662 PHY support
York Sun
- [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa
Valentin Longchamp
- [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa
Valentin Longchamp
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Markus Hubig
- [U-Boot] [PATCH 1/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL
Jassi Brar
- [U-Boot] [PATCH 1/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL
R, Sricharan
- [U-Boot] [PATCH 1/2] arm: rmobile: armadillo-800eva Remove board_eth_init
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] ARM: tegra: remove redundant mkdirs from board Makefiles
Stephen Warren
- [U-Boot] [PATCH 1/2] cfi: Check for blank before erase
Joe Hershberger
- [U-Boot] [PATCH 1/2] dfu:usb: Support for ext4
Lukasz Majewski
- [U-Boot] [PATCH 1/2] dfu:usb: Support for ext4
Marek Vasut
- [U-Boot] [PATCH 1/2] doc/git-mailrc: Add 'rmobile' alias
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] doc/git-mailrc: Add 'rmobile' alias
Mike Frysinger
- [U-Boot] [PATCH 1/2] efikamx: refine USB support
Matt Sealey
- [U-Boot] [PATCH 1/2] FEC: Do not pass unaligned buffer to network stack
Fabio Estevam
- [U-Boot] [PATCH 1/2] FEC: Do not pass unaligned buffer to network stack
Marek Vasut
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)
Stefano Babic
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)
Stefano Babic
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)
Philippe Reynes
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)
Stefano Babic
- [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)
Stefano Babic
- [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()
Marek Vasut
- [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()
Mike Frysinger
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Heiko Schocher
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Lukasz Majewski
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Heiko Schocher
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Lukasz Majewski
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Heiko Schocher
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Lukasz Majewski
- [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses
Lukasz Majewski
- [U-Boot] [PATCH 1/2] imx: Define architecture identifier
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] imx: Define architecture identifier
Otavio Salvador
- [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property
Kim Phillips
- [U-Boot] [PATCH 1/2] m28evk: Turn on caches
Fabio Estevam
- [U-Boot] [PATCH 1/2] m28evk: Turn on caches
Marek Vasut
- [U-Boot] [PATCH 1/2] m28evk: Turn on caches
Stefano Babic
- [U-Boot] [PATCH 1/2] m28evk: Turn on caches
Marek Vasut
- [U-Boot] [PATCH 1/2] m28evk: Turn on caches
Stefano Babic
- [U-Boot] [PATCH 1/2] mmc: Fix version check for clock API in sdhci driver
Joe Hershberger
- [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG
Marek Vasut
- [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG
Marek Vasut
- [U-Boot] [PATCH 1/2] MX28: Cleanup mxsboot within make mrproper
Marek Vasut
- [U-Boot] [PATCH 1/2] MX28: Cleanup mxsboot within make mrproper
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
Otavio Salvador
- [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
Marek Vasut
- [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL
Marek Vasut
- [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'
Marek Vasut
- [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'
Stefano Babic
- [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'
Stefano Babic
- [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console
Stefano Babic
- [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console
Stefano Babic
- [U-Boot] [PATCH 1/2] mx5: Add default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mx5: Add default pin initializers
Matt Sealey
- [U-Boot] [PATCH 1/2] mx5: Add default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mx5: Add default pin initializers
Stefano Babic
- [U-Boot] [PATCH 1/2] mx5: Add default pin initializers
Matt Sealey
- [U-Boot] [PATCH 1/2] nand/fsl_elbc: shrink SPL a bit by converting out_be32() to __raw_writel()
Scott Wood
- [U-Boot] [PATCH 1/2] nand_spl: p1010rdb: don't write to global variable before reloc
Scott Wood
- [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start
Mike Frysinger
- [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start
Joe Hershberger
- [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
Tom Rini
- [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
R, Sricharan
- [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
Tom Rini
- [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
Allen Martin
- [U-Boot] [PATCH 1/2] patman: Use reverse order for changelog
Otavio Salvador
- [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Add T4 device definitions
York Sun
- [U-Boot] [PATCH 1/2] powerpc/p1022ds: add support for SPI and SD boot
Andy Fleming
- [U-Boot] [PATCH 1/2] pxa25x: Add UDC registers definitions
Łukasz Dałek
- [U-Boot] [PATCH 1/2] pxa25x: Add UDC registers definitions
Marek Vasut
- [U-Boot] [PATCH 1/2] pxa: Add some stuff to examine cpu model and rev
Marek Vasut
- [U-Boot] [PATCH 1/2] pxa: Add some stuff to examine cpu model and rev
Łukasz Dałek
- [U-Boot] [PATCH 1/2] README.SPL: Add a small Debugging section
Tom Rini
- [U-Boot] [PATCH 1/2] serial: Support serial multi for Microblaze
Michal Simek
- [U-Boot] [PATCH 1/2] serial: Support serial multi for Microblaze
Stephan Linz
- [U-Boot] [PATCH 1/2] sf: stmicro: support JEDEC standard two-byte signature
Mike Frysinger
- [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory
Matt Sealey
- [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory
stefano babic
- [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory
Stefano Babic
- [U-Boot] [PATCH 1/2] tegra: init MMC from common board init
Lucas Stach
- [U-Boot] [PATCH 1/2] tegra: init MMC from common board init
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra: init MMC from common board init
Lucas Stach
- [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Mike Frysinger
- [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Lukasz Majewski
- [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Lukasz Majewski
- [U-Boot] [PATCH 1/3 V2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/3] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Josh Wu
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Anatolij Gustschin
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Wolfgang Denk
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Anatolij Gustschin
- [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/3] disk: part_efi: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] FEC: Remove endless loop in the FEC driver
Marek Vasut
- [U-Boot] [PATCH 1/3] hush: Add default value substitution support
Mike Frysinger
- [U-Boot] [PATCH 1/3] hush: Add default value substitution support
Joe Hershberger
- [U-Boot] [PATCH 1/3] Makefile: allow appending to LIB in sub-makefiles
Wolfgang Denk
- [U-Boot] [PATCH 1/3] MIPS: factor out endianess flag handling to arch config.mk
Mike Frysinger
- [U-Boot] [PATCH 1/3] MIPS: factor out endianess flag handling to arch config.mk
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR
Benoît Thébaudeau
- [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR
Stefano Babic
- [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR
Stefano Babic
- [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support
Terry Lv
- [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support
Stefano Babic
- [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro
Troy Kisky
- [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header
Marek Vasut
- [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header
Otavio Salvador
- [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header
Stefano Babic
- [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header
Otavio Salvador
- [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
Joe Hershberger
- [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
Scott Wood
- [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
Joe Hershberger
- [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
Scott Wood
- [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
Joe Hershberger
- [U-Boot] [PATCH 1/3] nds32: drop bi_enetaddr from global data
Mike Frysinger
- [U-Boot] [PATCH 1/3] nds32: drop bi_enetaddr from global data
Macpaul Lin
- [U-Boot] [PATCH 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Scott Wood
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Kumar Gala
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Kumar Gala
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Kumar Gala
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Scott Wood
- [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols
Scott Wood
- [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support
Mike Frysinger
- [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support
Bo Shen
- [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support
Mike Frysinger
- [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support
Bo Shen
- [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum
Lucas Stach
- [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum
Stephen Warren
- [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum
Simon Glass
- [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips
Łukasz Dałek
- [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips
Marek Vasut
- [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips
Łukasz Dałek
- [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips
Marek Vasut
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 1/4] arm:exynos4:trats: Correct SDRAM configuration for trats
Piotr Wilczek
- [U-Boot] [PATCH 1/4] COMMON: Implement common bounce buffer
Marek Vasut
- [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards
Marek Vasut
- [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards
Matt Sealey
- [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards
Matt Sealey
- [U-Boot] [PATCH 1/4] EXYNOS5: Add GPIO unique pin numbering support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4] EXYNOS: change the compile/clean option of spl
snow.jhkim at gmail.com
- [U-Boot] [PATCH 1/4] Implement verify option for sha1sum command
Joe Hershberger
- [U-Boot] [PATCH 1/4] Implement verify option for sha1sum command
Mike Frysinger
- [U-Boot] [PATCH 1/4] mpc5xxx: add pci_mpc5xxx_init prototype to common header
Anatolij Gustschin
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Marek Vasut
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Marek Vasut
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Stefano Babic
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Stefano Babic
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Marek Vasut
- [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init
Otavio Salvador
- [U-Boot] [PATCH 1/4] patman: fix end of changes detection
Ilya Yanok
- [U-Boot] [PATCH 1/4] rmobile: armadillo-800eva: Change init function of SCIFA1
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
Michal Simek
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
Joe Hershberger
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
Michal Simek
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
Joe Hershberger
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
Michal Simek
- [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver
John Williams
- [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver
Terry Lv
- [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver
Mike Frysinger
- [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver
Lv Terry-R65388
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Bo Shen
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Andreas Bießmann
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Mike Frysinger
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Bo Shen
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Bo Shen
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Andreas Bießmann
- [U-Boot] [PATCH 1/4] usb: lowlevel interface change to support multiple controllers
Marek Vasut
- [U-Boot] [PATCH 1/4] usb: lowlevel interface change to support multiple controllers
Lucas Stach
- [U-Boot] [PATCH 1/5] am335x evm: Initial support for AM335x GP EVM Profiles
Tom Rini
- [U-Boot] [PATCH 1/5] fw_env: Add env vars describing U-Boot target board
Benoît Thébaudeau
- [U-Boot] [PATCH 1/5] imx iim: Homogenize and fix register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 1/5] MSM7630: USB Gadget support
Srikanth Reddy Vintha
- [U-Boot] [PATCH 1/5] MSM7630: USB Gadget support
Srikanth Reddy Vintha
- [U-Boot] [PATCH 1/5] MX28: DMA: Align the struct mxs_dma_desc
Marek Vasut
- [U-Boot] [PATCH 1/5] MX28: DMA: Align the struct mxs_dma_desc
Stefano Babic
- [U-Boot] [PATCH 1/5] pci: fix errant data types and corresponding access functions
Andrew Sharp
- [U-Boot] [PATCH 1/5] powerpc/mpc85xx: fix Unicode characters in release.S
Timur Tabi
- [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions
Marek Vasut
- [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions
nerwusek
- [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions
Marek Vasut
- [U-Boot] [PATCH 1/5] sh: tmu: Changed TMU driver using array of structures
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/6 v2] arm:exynos4:trats: Correct SDRAM configuration for trats
Piotr Wilczek
- [U-Boot] [PATCH 1/6 v2] powerpc/corenet_ds: Update README.srio-boot-corenet
Liu Gang
- [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup
Bastian Ruppert
- [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup
Tom Rini
- [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup
Stefano Babic
- [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup
Tom Rini
- [U-Boot] [PATCH 1/6] fdt: Check error codes returned from fdtlib when loading ITB
Joe Hershberger
- [U-Boot] [PATCH 1/6] gpt:doc: GPT (GUID Partition Table) documentation
Lukasz Majewski
- [U-Boot] [PATCH 1/6] mx35 iomux: Remove unused macro
Benoît Thébaudeau
- [U-Boot] [PATCH 1/6] mx35 iomux: Remove unused macro
Stefano Babic
- [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data
Marek Vasut
- [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data
Lucas Stach
- [U-Boot] [PATCH 1/6] p1014rdb: set ddr bus width properly depending on SVR
Matthew McClintock
- [U-Boot] [PATCH 1/6] powerpc/85xx: add support for FM2 DTSEC5
Timur Tabi
- [U-Boot] [PATCH 1/6] powerpc/corenet_ds: Update README.srio-boot-corenet
Liu Gang
- [U-Boot] [PATCH 1/6] powerpc/mpc8xxx: Add immap for topology and rcpm registers
York Sun
- [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support
Stefan Roese
- [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support
Stefan Roese
- [U-Boot] [PATCH 1/7 V3] EXYNOS5: Add pinmux support for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7 V4] EXYNOS5: Add pinmux support for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7] dm: Add skeleton support for cores and drivers
Marek Vasut
- [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h
Benoît Thébaudeau
- [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h
Stefano Babic
- [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h
Stefano Babic
- [U-Boot] [PATCH 1/7] powerpc/85xx: add support for FM2 DTSEC5
Timur Tabi
- [U-Boot] [PATCH 1/8] EXT2: Indent cleanup of dev.c
Wolfgang Denk
- [U-Boot] [PATCH 1/8] powerpc/mpc85xx: Skip zero values for DDR debug registers
York Sun
- [U-Boot] [PATCH 1/9 V2] SOUND: Add I2S driver
Rajeshwari Shinde
- [U-Boot] [PATCH 1/9] combine block device load commands into common function
Rob Herring
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Rajeshwari Shinde
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Andrew Dyer
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Rajeshwari Birje
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Andrew Dyer
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Mike Frysinger
- [U-Boot] [PATCH 1/9] SOUND: Add I2S driver
Rajeshwari Birje
- [U-Boot] [PATCH 10/10] mx5 clocks: Fix MXC_FEC_CLK
Benoît Thébaudeau
- [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed
Yann Vernier
- [U-Boot] [PATCH 10/11] powerpc/corenet2: Add SerDes for corenet2
York Sun
- [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list
Mike Frysinger
- [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list
Joe Hershberger
- [U-Boot] [PATCH 10/13] Blackfin: bf609: add board files
Bob Liu
- [U-Boot] [PATCH 10/13] mtd mxc nand: Merge init functions
Benoît Thébaudeau
- [U-Boot] [PATCH 10/14] dm: Driver model analysis document for Watchdog subsystem has been added.
Marek Vasut
- [U-Boot] [PATCH 10/14] S3C64XX: Switch to use read/writel to operation clock system
Zhong Hongbo
- [U-Boot] [Patch 10/16] add supports to mips64 in io operation
Zhi-zhou Zhang
- [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command
Mike Frysinger
- [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command
Bob Liu
- [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command
Bob Liu
- [U-Boot] [PATCH 10/17] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash
Yann Vernier
- [U-Boot] [PATCH 11/11] powerpc/corenet2: fix mismatch DDR sync bit from RCW
York Sun
- [U-Boot] [PATCH 11/12] env: acl: Add support for access control to env ACL
Joe Hershberger
- [U-Boot] [PATCH 11/13] Blackfin: Bf60x: add hw watchdog support
Bob Liu
- [U-Boot] [PATCH 11/13] mxc nand: Let driver detect IP revision
Benoît Thébaudeau
- [U-Boot] [PATCH 11/13] mxc nand: Let driver detect IP revision
Stefano Babic
- [U-Boot] [PATCH 11/14] dm: add PCI design document
Marek Vasut
- [U-Boot] [PATCH 11/14] S3c64xx: clear GPIO, Interrupt, Watchdog variable.
Zhong Hongbo
- [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init
Bob Liu
- [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init
Mike Frysinger
- [U-Boot] [Patch 11/16] make size_t equal to unsigned int
Zhi-zhou Zhang
- [U-Boot] [Patch 11/16] make size_t equal to unsigned int
Daniel Schwierzeck
- [U-Boot] [PATCH 11/17] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH 12/12] env: cosmetic: Consilidate the default env definition
Mike Frysinger
- [U-Boot] [PATCH 12/12] env: cosmetic: Consilidate the default env definition
Joe Hershberger
- [U-Boot] [PATCH 12/13] Blackfin: Bf60x: add resume from hibernate
Bob Liu
- [U-Boot] [PATCH 12/13] mxc nand: Homogenize IP revisions with Linux
Benoît Thébaudeau
- [U-Boot] [PATCH 12/14] dm: Add pcmcia design document
Marek Vasut
- [U-Boot] [PATCH 12/14] S3C6400: clear memory init variable
Zhong Hongbo
- [U-Boot] [Patch 12/16] add config about mips64
Zhi-zhou Zhang
- [U-Boot] [Patch 12/16] add config about mips64
Daniel Schwierzeck
- [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly
Mike Frysinger
- [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly
Bob Liu
- [U-Boot] [PATCH 12/17] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH 13/13] Blackfin: update license to Clear BSD license.
Bob Liu
- [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5
Troy Kisky
- [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5
Troy Kisky
- [U-Boot] [PATCH 13/14] dm: RTC subsystem analysis added.
Marek Vasut
- [U-Boot] [PATCH 13/14] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Zhong Hongbo
- [U-Boot] [Patch 13/16] add link script of qemu-mips64
Zhi-zhou Zhang
- [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support
Bob Liu
- [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support
Mike Frysinger
- [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support
Bob Liu
- [U-Boot] [PATCH 13/17] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH 14/14] dm: Add twserial device document
Marek Vasut
- [U-Boot] [PATCH 14/14] S3C6400: Remove the unused variable for S3C6400
Zhong Hongbo
- [U-Boot] [Patch 14/16] add board qemu-mips64
Zhi-zhou Zhang
- [U-Boot] [PATCH 14/16] Blackfin: setup SMC if user desires it
Bob Liu
- [U-Boot] [PATCH 14/17] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH 14/17] ARM: SPL: Move gpmc_init() to spl_board_init()
Stefano Babic
- [U-Boot] [Patch 15/16] add standalone link script
Zhi-zhou Zhang
- [U-Boot] [Patch 15/16] add standalone link script
Daniel Schwierzeck
- [U-Boot] [PATCH 15/16] Blackfin: Bf60x: add resume from hibernate
Bob Liu
- [U-Boot] [PATCH 15/17] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH 15/17] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Christian Riesch
- [U-Boot] [Patch 16/16] add configs/qemu-mips64.h
Zhi-zhou Zhang
- [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.
Bob Liu
- [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.
Mike Frysinger
- [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.
Bob Liu
- [U-Boot] [PATCH 16/17] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Scott Wood
- [U-Boot] [PATCH 16/17] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH 17/17] ARM: SPL: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [Patch 2/17] add mips64/Makefile
Zhi-zhou Zhang
- [U-Boot] [PATCH 2/2 V3] SMDK5250: Config: Enable MAX77686 pmic chip
Minkyu Kang
- [U-Boot] [PATCH 2/2 V3] SMDK5250: Config: Enable MAX77686 pmic chip
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] Add unlzo command
Joe Hershberger
- [U-Boot] [PATCH 2/2] Add unlzo command
Mike Frysinger
- [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches
Fabio Estevam
- [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches
Veli-Pekka Peltola
- [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches
Stefano Babic
- [U-Boot] [PATCH 2/2] ARM: increase lmb stack space reservation to 4KB
Rob Herring
- [U-Boot] [PATCH 2/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL
Jassi Brar
- [U-Boot] [PATCH 2/2] arm: rmobile: Add cpu_eth_init function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] ARM: tegra: fix Ventana standalone build
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: tegra: fix Ventana standalone build
Tom Warren
- [U-Boot] [PATCH 2/2] armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack
Tom Rini
- [U-Boot] [PATCH 2/2] armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack
Allen Martin
- [U-Boot] [PATCH 2/2] board/freescale/common: VSC3316/VSC3308 initialization code
York Sun
- [U-Boot] [PATCH 2/2] cfi: Make the flash erase and write operations abortable
Joe Hershberger
- [U-Boot] [PATCH 2/2] dfu:usb:fix: Read the "filesize" environment variable only when file read
Marek Vasut
- [U-Boot] [PATCH 2/2] dfu:usb:fix: Read the "filesize" environment variable only when file read
Lukasz Majewski
- [U-Boot] [PATCH 2/2] efikamx: update and clean up configuration
Matt Sealey
- [U-Boot] [PATCH 2/2] FEC: Properly align address over the buffers for cache ops
Marek Vasut
- [U-Boot] [PATCH 2/2] Fixes the crippled console output on PortuxG20.
Markus Hubig
- [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX
Stefano Babic
- [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX
Stefano Babic
- [U-Boot] [PATCH 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board
Lukasz Majewski
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change
Stefano Babic
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change
Stefano Babic
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v2)
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v3)
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v3)
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)
Philippe Reynes
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)
Stefano Babic
- [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)
Stefano Babic
- [U-Boot] [PATCH 2/2] km_kirkwood: enable MV88E6352_SWITCH support for kmnusa
Valentin Longchamp
- [U-Boot] [PATCH 2/2] km_kirkwood: enable MV88E6352_SWITCH support for kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2] libfdt: Add helpers for 64-bit integer properties
Kim Phillips
- [U-Boot] [PATCH 2/2] mmc: Add a SDHCI quirk for boards that have no CD
Joe Hershberger
- [U-Boot] [PATCH 2/2] MX28: Add LRADC dump into SPL debug
Marek Vasut
- [U-Boot] [PATCH 2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
Marek Vasut
- [U-Boot] [PATCH 2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
Stefano Babic
- [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Otavio Salvador
- [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Stefano Babic
- [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Marek Vasut
- [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code
Stefano Babic
- [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code
Stefano Babic
- [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code
Marek Vasut
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Matt Sealey
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Marek Vasut
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Matt Sealey
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Matt Sealey
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Stefano Babic
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Marek Vasut
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Otavio Salvador
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Fabio Estevam
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Fabio Estevam
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Otavio Salvador
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Stefano Babic
- [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram
Fabio Estevam
- [U-Boot] [PATCH 2/2] nand_spl: p1010rdb: optimize ddr init for size
Scott Wood
- [U-Boot] [PATCH 2/2] net: Filter incoming netconsole packets by IP
Joe Hershberger
- [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order
Otavio Salvador
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
Scott Wood
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
McClintock Matthew-B29882
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
McClintock Matthew-B29882
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
Scott Wood
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
Huang Changming-R66093
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
Scott Wood
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Add T4240 SoC
York Sun
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Enable workaround for erratum CPU_A011 for P3041
Andy Fleming
- [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget
Łukasz Dałek
- [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget
Marek Vasut
- [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget driver
Łukasz Dałek
- [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget driver
Marek Vasut
- [U-Boot] [PATCH 2/2] README.SPL: Move the 'Estimating stack usage' from omap3 to here
Tom Rini
- [U-Boot] [PATCH 2/2] rmobile: Add README
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] rmobile: Add README
Tom Rini
- [U-Boot] [PATCH 2/2] rmobile: Add README
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] rmobile: Add README
Tom Rini
- [U-Boot] [PATCH 2/2] rmobile: Add README
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] serial: uartlite: Init all uartlites for serial multi
Michal Simek
- [U-Boot] [PATCH 2/2] serial: uartlite: Init all uartlites for serial multi
Stephan Linz
- [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts
Mike Frysinger
- [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts
Stephan Linz
- [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory
Matt Sealey
- [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory
stefano babic
- [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory
Stefano Babic
- [U-Boot] [PATCH 2/2] tegra20: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol
Lucas Stach
- [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol
Lucas Stach
- [U-Boot] [PATCH 2/2] video:trats:logo: Make tizen_hd_logo cache line aligned.
Lukasz Majewski
- [U-Boot] [PATCH 2/2] vision2: do not overwrite the console
Fabio Estevam
- [U-Boot] [PATCH 2/2] vision2: do not overwrite the console
Stefano Babic
- [U-Boot] [PATCH 2/3] arm : at91sam9x5 : enable serial flash boot
Bo Shen
- [U-Boot] [PATCH 2/3] arm : at91sam9x5 : enable serial flash boot
Andreas Bießmann
- [U-Boot] [PATCH 2/3] at91: atmel_nand: remove unused variables.
Josh Wu
- [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID
Stephen Warren
- [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID
Stephen Warren
- [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID
Lukasz Majewski
- [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID
Stephen Warren
- [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID
Lukasz Majewski
- [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()
Marek Vasut
- [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()
Mike Frysinger
- [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()
Anatolij Gustschin
- [U-Boot] [PATCH 2/3] FEC: Rework the TX wait mechanism
Marek Vasut
- [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask
Stefano Babic
- [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH 2/3] hush: Don't parse the contents of a dereferenced var
Joe Hershberger
- [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y
Wolfgang Denk
- [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y
Marek Vasut
- [U-Boot] [PATCH 2/3] MIPS: move CONFIG_STANDALONE_LOAD_ADDR to CPU config makefiles
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 2/3] mx35: Define MAX and AIPS registers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/3] mx51evk: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx51evk: Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi
Terry Lv
- [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi
Stefano Babic
- [U-Boot] [PATCH 2/3] mxs: Only build internal Ethernet controller for i.MX28
Marek Vasut
- [U-Boot] [PATCH 2/3] mxs: Only build internal Ethernet controller for i.MX28
Otavio Salvador
- [U-Boot] [PATCH 2/3] nand: consolidate duplicated constants
Joe Hershberger
- [U-Boot] [PATCH 2/3] nds32: delete unused local variable
Mike Frysinger
- [U-Boot] [PATCH 2/3] nds32: delete unused local variable
Macpaul Lin
- [U-Boot] [PATCH 2/3] powerpc/85xx: clear out TLB on boot
Scott Wood
- [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions
Łukasz Dałek
- [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions
Marek Vasut
- [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions
Łukasz Dałek
- [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions
Marek Vasut
- [U-Boot] [PATCH 2/3] tegra20: add clock_set_pllout function
Lucas Stach
- [U-Boot] [PATCH 2/3] tegra20: add clock_set_pllout function
Stephen Warren
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 2/4] Add parameter to sha1sum to save the SHA1 sum
Joe Hershberger
- [U-Boot] [PATCH 2/4] arm:exynos4:trats: Fix SDRAM size
Piotr Wilczek
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD
Matt Sealey
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD
Stefano Babic
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD
Stefano Babic
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Matt Sealey
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Marek Vasut
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Marek Vasut
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Marek Vasut
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Matt Sealey
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Stefano Babic
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Matt Sealey
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
stefano babic
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
stefano babic
- [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD
Matt Sealey
- [U-Boot] [PATCH 2/4] EXYNOS: add XXTI for clock source
snow.jhkim at gmail.com
- [U-Boot] [PATCH 2/4] EXYNOS: clock: add the get_mmc_clk function
Andy Fleming
- [U-Boot] [PATCH 2/4] MMC: MXS: Convert MXS MMC driver to generic bounce buffer
Marek Vasut
- [U-Boot] [PATCH 2/4] mpc5xxx: add GPIO port configuration
Anatolij Gustschin
- [U-Boot] [PATCH 2/4] mx53_smd: add spi nor support
Terry Lv
- [U-Boot] [PATCH 2/4] mx5: Optimize lowlevel_init code size
Benoît Thébaudeau
- [U-Boot] [PATCH 2/4] mx5: Optimize lowlevel_init code size
Otavio Salvador
- [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP
Joe Hershberger
- [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 2/4] patman: don't pick changes while processing patches
Ilya Yanok
- [U-Boot] [PATCH 2/4] rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDT
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] S5P: GPIO: Add GPIO pin numbering to driver
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun
Bo Shen
- [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun
Andreas Bießmann
- [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun
Mike Frysinger
- [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun
Bo Shen
- [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun
Andreas Bießmann
- [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH 2/5] [cosmetic] pci: clean up some whitespace and formatting
Andrew Sharp
- [U-Boot] [PATCH 2/5] am33xx: Correct MMC1, remove MMC2 support
Tom Rini
- [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0
Wolfgang Denk
- [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/5] drivers/usb/gadget/Makefile: Add UDC ACM and Ether
Marek Vasut
- [U-Boot] [PATCH 2/5] env_common: Add missing ethprime
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5] imx iim: Add useful fuse definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5] MSM 7x27a: Add support for qualcomm msm 7x27a SOC
Srikanth Reddy Vintha
- [U-Boot] [PATCH 2/5] MSM 7x27a: Add support for qualcomm msm 7x27a SOC
Srikanth Reddy Vintha
- [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout
Marek Vasut
- [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout
Fabio Estevam
- [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout
Marek Vasut
- [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout
Fabio Estevam
- [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout
Marek Vasut
- [U-Boot] [PATCH 2/5] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs
Timur Tabi
- [U-Boot] [PATCH 2/5] sh: tmu: Changed switch statement to shift operation
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/6 v2] arm:exynos4:trats: Fix SDRAM size
Piotr Wilczek
- [U-Boot] [PATCH 2/6 v2] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
Liu Gang
- [U-Boot] [PATCH 2/6] davinci: ea20: the console is always set to the serial line
Bastian Ruppert
- [U-Boot] [PATCH 2/6] davinci: ea20: the console is always set to the serial line
Stefano Babic
- [U-Boot] [PATCH 2/6] fdt: Limit printed hex in fdt print and list commands
Joe Hershberger
- [U-Boot] [PATCH 2/6] fm-eth: add function fm_info_get_phy_address()
Timur Tabi
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH 2/6] mx35 gpio: Homogenize register naming
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning
Lucas Stach
- [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning
Marek Vasut
- [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning
Lucas Stach
- [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning
Joe Hershberger
- [U-Boot] [PATCH 2/6] p1010rdb: fix ddr values for p1014rdb (setting bus width to 16bit)
Matthew McClintock
- [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
Andy Fleming
- [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
Liu Gang
- [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
Liu Gang
- [U-Boot] [PATCH 2/6] powerpc/mpc8xxx: use topology registers to calculate number of cores
York Sun
- [U-Boot] [PATCH 2/6] powerpc: Extract EPAPR_MAGIC constants into processor.h
Stefan Roese
- [U-Boot] [PATCH 2/7 V3] SPI: Add W25Q32 to Winbond SPI flash table
Mike Frysinger
- [U-Boot] [PATCH 2/7 V3] SPI: Add W25Q32 to Winbond SPI flash table
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
Mike Frysinger
- [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
Mike Frysinger
- [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
Joonyoung Shim
- [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
Mike Frysinger
- [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7] dm: sandbox: Add necessary linker sections
Marek Vasut
- [U-Boot] [PATCH 2/7] fm-eth: add function fm_info_get_phy_address()
Timur Tabi
- [U-Boot] [PATCH 2/7] mx35: Remove declaration of non-existing function
Benoît Thébaudeau
- [U-Boot] [PATCH 2/7] mx35: Remove declaration of non-existing function
Stefano Babic
- [U-Boot] [PATCH 2/8] EXT2: Indent cleanup ext2fs.c
Wolfgang Denk
- [U-Boot] [PATCH 2/8] powerpc/mpc8xxx: Add fine timing support for DDR3
York Sun
- [U-Boot] [PATCH 2/9 V2] SOUND: Add WM8994 codec
Rajeshwari Shinde
- [U-Boot] [PATCH 2/9] disk/part: check bootable flag for DOS partitions
Rob Herring
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Andreas Bießmann
- [U-Boot] [PATCH 2/9] SOUND: Add WM8994 codec
Rajeshwari Shinde
- [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function
Kim Phillips
- [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function
Kim Phillips
- [U-Boot] [Patch 3/16] add mips64/cache.S
Zhi-zhou Zhang
- [U-Boot] [PATCH 3/3] arm : at91sam9x5 : fix a small bug for NAND
Bo Shen
- [U-Boot] [PATCH 3/3] arm : at91sam9x5 : fix a small bug for NAND
Andreas Bießmann
- [U-Boot] [PATCH 3/3] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Josh Wu
- [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()
Mike Frysinger
- [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()
Marek Vasut
- [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()
Marek Vasut
- [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()
Anatolij Gustschin
- [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()
Anatolij Gustschin
- [U-Boot] [PATCH 3/3] FEC: Replace magic contants
Marek Vasut
- [U-Boot] [PATCH 3/3] hush: Include file and line number when reporting syntax errors
Joe Hershberger
- [U-Boot] [PATCH 3/3] hush: Include file and line number when reporting syntax errors
Mike Frysinger
- [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Marek Vasut
- [U-Boot] [PATCH 3/3] MIPS: add support for qemu for little endian MIPS32 CPUs
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
stefano babic
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
Stefano Babic
- [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH 3/3] mx53ard: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx53ard: Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH 3/3] mx6qsabrelite: set CONFIG_FEC_MXC_PHYMASK
Troy Kisky
- [U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs
Terry Lv
- [U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs
Stefano Babic
- [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Marek Vasut
- [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Otavio Salvador
- [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Veli-Pekka Peltola
- [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Stefano Babic
- [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Otavio Salvador
- [U-Boot] [PATCH 3/3] nand: Make NAND lock status compatible with Micron
Scott Wood
- [U-Boot] [PATCH 3/3] nand: Make NAND lock status compatible with Micron
Joe Hershberger
- [U-Boot] [PATCH 3/3] nds32: fix unused pmu_init warning
Mike Frysinger
- [U-Boot] [PATCH 3/3] nds32: fix unused pmu_init warning
Macpaul Lin
- [U-Boot] [PATCH 3/3] powerpc/fsl-corenet: work around erratum A004510
Scott Wood
- [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver
Łukasz Dałek
- [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver
Marek Vasut
- [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver
Łukasz Dałek
- [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver
Marek Vasut
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Lucas Stach
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Igor Grinberg
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Lucas Stach
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Igor Grinberg
- [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code
Igor Grinberg
- [U-Boot] [PATCH 3/3] tegra: enable CONFIG_CMD_PARTUUID
Stephen Warren
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Joe Hershberger
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Joe Hershberger
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Joe Hershberger
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Joe Hershberger
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards
Piotr Wilczek
- [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards
Minkyu Kang
- [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards
Piotr Wilczek
- [U-Boot] [PATCH 3/4] atmel: at91sam9x5: fix name error for spi
Bo Shen
- [U-Boot] [PATCH 3/4] atmel: at91sam9x5: fix name error for spi
Andreas Bießmann
- [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience
Matt Sealey
- [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience
Stefano Babic
- [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience
Stefano Babic
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Benoît Thébaudeau
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Marek Vasut
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Marek Vasut
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Marek Vasut
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Marek Vasut
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Stefano Babic
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
stefano babic
- [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 3/4] EXYNOS5: Enable GPIO Numbering.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support
Kyungmin Park
- [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support
Minkyu Kang
- [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support
snow.jhkim at gmail.com
- [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support
snow.jhkim at gmail.com
- [U-Boot] [PATCH 3/4] Implement verify option for md5sum command
Joe Hershberger
- [PATCH 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325
Jamie Lentin
- [U-Boot] [PATCH 3/4] MMC: MXS: Toggle the generic bounce buffer on the boards
Marek Vasut
- [U-Boot] [PATCH 3/4] mpc52xx: add common o2dnt and o2dnt2 support and configurations
Anatolij Gustschin
- [U-Boot] [PATCH 3/4] mx5: Optimize lowlevel_init for TO 3
Benoît Thébaudeau
- [U-Boot] [PATCH 3/4] mx5: Optimize lowlevel_init for TO 3
Otavio Salvador
- [U-Boot] [PATCH 3/4] mxc_spi: change to use version config instead of soc config in mxc_spi
Terry Lv
- [U-Boot] [PATCH 3/4] patman: don't mess with changelog
Ilya Yanok
- [U-Boot] [PATCH 3/4] rmobile: armadillo-800eva: Add Support NFS and BOOTZ command
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] tegra20: port to new ehci interface
Lucas Stach
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Stefano Babic
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Dirk Behme
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Dirk Behme
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Stefano Babic
- [U-Boot] [PATCH 3/5] Add fuse API and commands
Eric Nelson
- [U-Boot] [PATCH 3/5] am335x evm: Enable MMC1 pinmux
Tom Rini
- [U-Boot] [PATCH 3/5] env import/export: Remove from help if disabled
Mike Frysinger
- [U-Boot] [PATCH 3/5] env import/export: Remove from help if disabled
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] MSM 7x27a: Add support for qualcomm msm7x27a surf board
Srikanth Reddy Vintha
- [U-Boot] [PATCH 3/5] MSM 7x27a: Add support for qualcomm msm7x27a surf board
Srikanth Reddy Vintha
- [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver
Marek Vasut
- [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver
Mike Frysinger
- [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver
Marek Vasut
- [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver
Mike Frysinger
- [U-Boot] [PATCH 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage
Andrew Sharp
- [U-Boot] [PATCH 3/5] powerpc/85xx: move SRIO configuration out of corenet_ds.h
Timur Tabi
- [U-Boot] [PATCH 3/5] pxa255: Add USB CDC ACM driver
Marek Vasut
- [U-Boot] [PATCH 3/5] sh: tmu: Removed arch/sh/include/asm/clk.h
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/6 v2] arm:exynos4:pinmux: Modify the gpio function for mmc
Piotr Wilczek
- [U-Boot] [PATCH 3/6 v2] powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macro
Liu Gang
- [U-Boot] [PATCH 3/6] Add e6500 processor detection
York Sun
- [U-Boot] [PATCH 3/6] fdt: Add get commands to fdt
Joe Hershberger
- [U-Boot] [PATCH 3/6] gpt: Replacement of GPT structures members with ones indicating endianness and size
Lukasz Majewski
- [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions
Stefano Babic
- [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions
Stefano Babic
- [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions
Stefano Babic
- [U-Boot] [PATCH 3/6] net: asix: split out basic reset function
Lucas Stach
- [U-Boot] [PATCH 3/6] net: asix: split out basic reset function
Marek Vasut
- [U-Boot] [PATCH 3/6] net: asix: split out basic reset function
Joe Hershberger
- [U-Boot] [PATCH 3/6] net: asix: split out basic reset function
Mike Frysinger
- [U-Boot] [PATCH 3/6] net: asix: split out basic reset function
Lucas Stach
- [U-Boot] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()
Timur Tabi
- [U-Boot] [PATCH 3/6] powerpc/p1010rdb: nandboot: compare SVR properly
Matthew McClintock
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Heiko Schocher
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Daniel Schwierzeck
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Daniel Schwierzeck
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Daniel Schwierzeck
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Daniel Schwierzeck
- [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Bastian Ruppert
- [U-Boot] [PATCH 3/7 V3] EXYNOS: Add clock for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7 V4] EXYNOS: Add clock for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7] [v2] powerpc/85xx: introduce function serdes_device_from_fm_port()
Timur Tabi
- [U-Boot] [PATCH 3/7] dm: sandbox: Add necessary GD sections
Marek Vasut
- [U-Boot] [PATCH 3/7] mx35: Fix decode_pll
Benoît Thébaudeau
- [U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file
Wolfgang Denk
- [U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file
Timo Ketola
- [U-Boot] [PATCH 3/8] powerpc/mpc8xxx: Add support for cas latency 12 and above
York Sun
- [U-Boot] [PATCH 3/9 V2] Sound: Add command for audio playback
Rajeshwari Shinde
- [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition
Stephen Warren
- [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition
Rob Herring
- [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition
Stephen Warren
- [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition
Rob Herring
- [U-Boot] [PATCH 3/9] Sound: Add command for audio playback
Rajeshwari Shinde
- [U-Boot] [Patch 4/16] add mips64/config.mk
Zhi-zhou Zhang
- [U-Boot] [Patch 4/16] add mips64/config.mk
Daniel Schwierzeck
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Joe Hershberger
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Joe Hershberger
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Joe Hershberger
- [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4] Add parameter to md5sum to save the md5 sum
Joe Hershberger
- [U-Boot] [PATCH 4/4] arm:exynos4:universal_c210: Eliminate low level initialisation
Piotr Wilczek
- [U-Boot] [PATCH 4/4] atmel: at91sam9x5: add spi flash boot support
Bo Shen
- [U-Boot] [PATCH 4/4] efikamx: port USB setup to new iomux model
Matt Sealey
- [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Stefano Babic
- [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Stefano Babic
- [U-Boot] [PATCH 4/4] EXYNOS: Add support for Insignal Origen QUAD board
snow.jhkim at gmail.com
- [U-Boot] [PATCH 4/4] EXYNOS: Add support for Insignal Origen QUAD board
snow.jhkim at gmail.com
- [U-Boot] [PATCH 4/4] EXYNOS: Update pinmux to use gpio numbering
Rajeshwari Shinde
- [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320
Jamie Lentin
- [U-Boot] [PATCH 4/4] MMC: Remove the MMC bounce buffer
Marek Vasut
- [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board
Anatolij Gustschin
- [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board
Anatolij Gustschin
- [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board
Anatolij Gustschin
- [U-Boot] [PATCH 4/4] mx5: Mark lowlevel_init board-specific code
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] mx5: Mark lowlevel_init board-specific code
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] mxc_spi: apply new mxc_spi version configs to other soc configs
Terry Lv
- [U-Boot] [PATCH 4/4] patman: don't mess with signoffs
Ilya Yanok
- [U-Boot] [PATCH 4/4] rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] usb: add support for multiple usb controllers
Marek Vasut
- [U-Boot] [PATCH 4/4] usb: add support for multiple usb controllers
Lucas Stach
- [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/5] Add fsl_iim driver
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] Add fsl_iim driver
Stefano Babic
- [U-Boot] [PATCH 4/5] Add fsl_iim driver
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] Add fsl_iim driver
Stefano Babic
- [U-Boot] [PATCH 4/5] am33xx: Add support, update omap3 McSPI driver
Tom Rini
- [U-Boot] [PATCH 4/5] MSM7x27a: USB Gadget support
Srikanth Reddy Vintha
- [U-Boot] [PATCH 4/5] MSM7x27a: USB Gadget support
Srikanth Reddy Vintha
- [U-Boot] [PATCH 4/5] MX28: m28evk: Align SSP clock speed
Marek Vasut
- [U-Boot] [PATCH 4/5] pci: update pci_ids.h with a few new entries
Andrew Sharp
- [U-Boot] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Timur Tabi
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Mike Frysinger
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Wolfgang Denk
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Wolfgang Denk
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] README: The ver env var is not read-only
Mike Frysinger
- [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration
Jaehoon Chung
- [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration
Jaehoon Chung
- [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH 4/6 v2] powerpc/corenet_ds: Update README and README.srio-pcie-boot-corenet
Liu Gang
- [U-Boot] [PATCH 4/6] Add IFC offset for DPAA/Corenet platforms
York Sun
- [U-Boot] [PATCH 4/6] env: Extract getenv_f() into separate source file
Stefan Roese
- [U-Boot] [PATCH 4/6] fdt: Identify scripts in ITBs as printable strings
Joe Hershberger
- [U-Boot] [PATCH 4/6] fm-eth: use fdt_status_disabled() function in ft_fixup_port()
Timur Tabi
- [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration
Lukasz Majewski
- [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function
Benoît Thébaudeau
- [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function
Stefano Babic
- [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function
Stefano Babic
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
Scott Wood
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
Scott Wood
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
Scott Wood
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
Matthew McClintock
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
McClintock Matthew-B29882
- [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards
McClintock Matthew-B29882
- [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function
Lucas Stach
- [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function
Marek Vasut
- [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function
Joe Hershberger
- [U-Boot] [PATCH 4/6] video: cfb_console: add function to plot the logo area black
Bastian Ruppert
- [U-Boot] [PATCH 4/7 V3] EXYNOS5: Add base address for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7 V4] EXYNOS5: Add base address for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7] dm: REMOVE: sandbox binding experiment
Marek Vasut
- [U-Boot] [PATCH 4/7] fm-eth: use fdt_status_disabled() function in ft_fixup_port()
Timur Tabi
- [U-Boot] [PATCH 4/7] mx35: Add definitions for clock gate values
Benoît Thébaudeau
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH 4/8] powerpc/mpc8xxx: Enable 3-way and 4-way DDR interleaving
York Sun
- [U-Boot] [PATCH 4/9 V2] EXYNOS: Add I2S registers
Rajeshwari Shinde
- [U-Boot] [PATCH 4/9] ext4: remove init_fs/deinit_fs
Rob Herring
- [U-Boot] [PATCH 4/9] EXYNOS: Add I2S registers
Rajeshwari Shinde
- [U-Boot] [Patch 5/16] add mips64/cpu.h
Zhi-zhou Zhang
- [U-Boot] [Patch 5/16] add mips64/cpu.h
Daniel Schwierzeck
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Mike Frysinger
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Mike Frysinger
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Jeroen Hofstee
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Mike Frysinger
- [U-Boot] [PATCH 5/5] Add env var giving the board revision
Wolfgang Denk
- [U-Boot] [PATCH 5/5] am335x evm: Enable support for spi0
Tom Rini
- [U-Boot] [PATCH 5/5] fix for MMC write issue
Srikanth Reddy Vintha
- [U-Boot] [PATCH 5/5] fix for MMC write issue
Srikanth Reddy Vintha
- [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim
Stefano Babic
- [U-Boot] [PATCH 5/5] MX28: m28evk: Enable SPI DMA
Marek Vasut
- [U-Boot] [PATCH 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done
Andrew Sharp
- [U-Boot] [PATCH 5/5] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board
Timur Tabi
- [U-Boot] [PATCH 5/6 v2] arm:exynos4:universal: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH 5/6 v2] powerpc/corenet_ds: Master module for boot from PCIE
Liu Gang
- [U-Boot] [PATCH 5/6] Added new ext fields to IFC
York Sun
- [U-Boot] [PATCH 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Bastian Ruppert
- [U-Boot] [PATCH 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Stefano Babic
- [U-Boot] [PATCH 5/6] fdt: Check for a token to skip auto-hash validation
Joe Hershberger
- [U-Boot] [PATCH 5/6] gpt: Support for new "gpt" command
Lukasz Majewski
- [U-Boot] [PATCH 5/6] mpc5200: Add SPL support
Stefan Roese
- [U-Boot] [PATCH 5/6] mx35: Add default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] mx35: Add default pin initializers
Stefano Babic
- [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller
Matthew McClintock
- [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller
Scott Wood
- [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller
McClintock Matthew-B29882
- [U-Boot] [PATCH 5/6] net: asix: add read_mac function
Lucas Stach
- [U-Boot] [PATCH 5/6] net: asix: add read_mac function
Marek Vasut
- [U-Boot] [PATCH 5/6] net: asix: add read_mac function
Joe Hershberger
- [U-Boot] [PATCH 5/6] powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver
Timur Tabi
- [U-Boot] [PATCH 5/7 V3] SPI: Add SPI Driver for EXYNOS.
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7 V3] SPI: Add SPI Driver for EXYNOS.
Mike Frysinger
- [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.
Mike Frysinger
- [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.
Joonyoung Shim
- [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.
Rajeshwari Birje
- [U-Boot] [PATCH 5/7] dm: gpio: Add draft GPIO core and convert sandbox to use it
Marek Vasut
- [U-Boot] [PATCH 5/7] dm: gpio: Add draft GPIO core and convert sandbox to use it
Pavel Herrmann
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver
Timur Tabi
- [U-Boot] [PATCH 5/8] powerpc/mpc8xxx: Fix bug for extended DDR timing
York Sun
- [U-Boot] [PATCH 5/9 V2] EXYNOS: Add parameters required by I2S
Rajeshwari Shinde
- [U-Boot] [PATCH 5/9] cmd_extX: use common get_device_and_partition function
Rob Herring
- [U-Boot] [PATCH 5/9] EXYNOS: Add parameters required by I2S
Rajeshwari Shinde
- [U-Boot] [Patch 6/16] add mips64/interrupts.c
Zhi-zhou Zhang
- [U-Boot] [PATCH 6/6 v2] arm:exynos4:universal: Eliminated low level init
Piotr Wilczek
- [U-Boot] [PATCH 6/6 v2] powerpc/corenet_ds: Slave module for boot from PCIE
Liu Gang
- [U-Boot] [PATCH 6/6] davinci: ea20: add some configs and default environmet variables
Bastian Ruppert
- [U-Boot] [PATCH 6/6] davinci: ea20: add some configs and default environmet variables
Stefano Babic
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Mike Frysinger
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Mike Frysinger
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Mike Frysinger
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Joe Hershberger
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Joe Hershberger
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Joe Hershberger
- [U-Boot] [PATCH 6/6] gpt: Enable support for GPT partition table restoration at Samsung's Trats
Lukasz Majewski
- [U-Boot] [PATCH 6/6] mpc5200: Add a3m071 board support
Stefan Roese
- [U-Boot] [PATCH 6/6] mx35: Use default pin initializers
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Andy Fleming
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Matthew McClintock
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Scott Wood
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
McClintock Matthew-B29882
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Scott Wood
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
McClintock Matthew-B29882
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Scott Wood
- [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync
Scott Wood
- [U-Boot] [PATCH 6/6] net: asix: add AX88772B support
Lucas Stach
- [U-Boot] [PATCH 6/6] net: asix: add AX88772B support
Marek Vasut
- [U-Boot] [PATCH 6/6] net: asix: add AX88772B support
Joe Hershberger
- [U-Boot] [PATCH 6/6] powerpc/85xx: update P4080DS MDIO bus multiplexer support
Timur Tabi
- [U-Boot] [PATCH 6/6] powerpc/mpc8xxx: fix core id for multicore booting
York Sun
- [U-Boot] [PATCH 6/6] powerpc/mpc8xxx: fix core id for multicore booting
Tabi Timur-B04825
- [U-Boot] [PATCH 6/7 V3] EXYNOS5: Enable SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7 V4] EXYNOS5: Enable SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7] dm: add dummy demo driver and core
Marek Vasut
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Stefano Babic
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Stefano Babic
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Stefano Babic
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support
Timur Tabi
- [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support
Kumar Gala
- [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support
Kumar Gala
- [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support
Timur Tabi
- [U-Boot] [PATCH 6/8] powerpc/mpc8xxx DDR: Fix CAS latency calculation
York Sun
- [U-Boot] [PATCH 6/9 V2] EXYNOS: Add pinmux for I2S
Rajeshwari Shinde
- [U-Boot] [PATCH 6/9] cmd_fat: use common get_device_and_partition function
Rob Herring
- [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S
Rajeshwari Shinde
- [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S
Chander Kashyap
- [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S
Rajeshwari Birje
- [U-Boot] [Patch 7/16] add mips64/start.S
Zhi-zhou Zhang
- [U-Boot] [PATCH 7/7 V3] Enable SPI booting.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7 V3] Enable SPI booting.
Mike Frysinger
- [U-Boot] [PATCH 7/7] dm: Add "dm dump" command
Marek Vasut
- [U-Boot] [PATCH 7/7] EXYNOS5: Enable SPI booting.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7] mx35: Add cpu_mmc_init()
Benoît Thébaudeau
- [U-Boot] [PATCH 7/7] powerpc/85xx: remove support for the Freescale P3060
Timur Tabi
- [U-Boot] [PATCH 7/8] powerpc/mpc8xxx DDR: Fall back to raw timing for first controller only
York Sun
- [U-Boot] [PATCH 7/9 V2] EXYNOS: Add I2S base address
Rajeshwari Shinde
- [U-Boot] [PATCH 7/9] cmd_disk: use common get_device_and_partition function
Rob Herring
- [U-Boot] [PATCH 7/9] EXYNOS: Add I2S base address
Rajeshwari Shinde
- [U-Boot] [Patch 8/16] add mips64/time.c
Zhi-zhou Zhang
- [U-Boot] [PATCH 8/8] powerpc/mpc8xxx DDR: Fix interactive DDR debugging
York Sun
- [U-Boot] [PATCH 8/9 V2] EXYNOS: Add clock for I2S
Rajeshwari Shinde
- [U-Boot] [PATCH 8/9] cmd_zfs: use common get_device_and_partition function
Rob Herring
- [U-Boot] [PATCH 8/9] EXYNOS: Add clock for I2S
Rajeshwari Shinde
- [U-Boot] [Patch 9/16] make UNCACHED_SDRAM available for mips64
Zhi-zhou Zhang
- [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable Sound
Rajeshwari Shinde
- [U-Boot] [PATCH 9/9] cmd_reiser: use common get_device_and_partition function
Rob Herring
- [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound
Rajeshwari Shinde
- [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound
Chander Kashyap
- [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound
Rajeshwari Birje
- [U-Boot] [PATCH v1 0/6] Rework for mxs SoC family support
Otavio Salvador
- [U-Boot] [PATCH v1 1/3] mxs: Remove unused iomux-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v1 1/3] mxs: Remove unused iomux-mx28.h
Marek Vasut
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Andy Fleming
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Eric Nelson
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Andy Fleming
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Joe Hershberger
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Andy Fleming
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Eric Nelson
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Marek Vasut
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Stefano Babic
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
- [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Stefano Babic
- [U-Boot] [PATCH v1 1/8] OMAP3: tam3517: add function to read MAC from EEPROM
Stefano Babic
- [U-Boot] [PATCH V1 2/3] fec_mxc: use phy_connect_by_mask
Troy Kisky
- [U-Boot] [PATCH v1 2/3] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v1 2/3] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Marek Vasut
- [U-Boot] [PATCH v1 2/6] mxs: prefix register acessor macros with 'mxs' prefix
Otavio Salvador
- [U-Boot] [PATCH v1 2/8] OMAP3: twister : get MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH V1 3/3] mx6qsabrelite: set CONFIG_FEC_MXC_PHYMASK
Troy Kisky
- [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'
Marek Vasut
- [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'
Otavio Salvador
- [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'
Marek Vasut
- [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'
Otavio Salvador
- [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'
Otavio Salvador
- [U-Boot] [PATCH v1 3/6] mxs: prefix register structs with 'mxs' prefix
Otavio Salvador
- [U-Boot] [PATCH v1 3/8] OMAP3: mt_ventoux: Correct board pinmux
Stefano Babic
- [U-Boot] [PATCH v1 4/6] mxs: Reowork SPL to use 'mxs' prefix for methods
Otavio Salvador
- [U-Boot] [PATCH v1 4/8] OMAP3: mt_ventoux: activate GPIO4
Stefano Babic
- [U-Boot] [PATCH v1 5/6] mxs: Clarify why we poweroff in case of brownout in 5v conflict
Otavio Salvador
- [U-Boot] [PATCH v1 5/8] OMAP3: mt_ventoux: read MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH v1 6/6] mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
Otavio Salvador
- [U-Boot] [PATCH v1 6/8] OMAP3: mt_ventoux: disable the buzzer at start-up
Stefano Babic
- [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register
Stefano Babic
- [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register
Jeroen Hofstee
- [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register
Stefano Babic
- [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support
Stefano Babic
- [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support
Heiko Schocher
- [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support
Stefano Babic
- [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support
Jeroen Hofstee
- [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support
Stefano Babic
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Lucas Stach
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Albert ARIBAUD
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v10 01/16] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v10 02/16] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v10 03/16] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v10 04/16] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v10 05/16] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v10 06/16] mkconfig: remove bashisms and cleanup config.mk generation
Allen Martin
- [U-Boot] [PATCH v10 07/16] MAKEALL: update to work with new boards.cfg syntax
Allen Martin
- [U-Boot] [PATCH v10 08/16] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v10 09/16] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v10 10/16] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v10 11/16] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v10 12/16] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v10 13/16] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v10 14/16] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v10 15/16] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v10 16/16] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] [PATCH v11 00/16] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v11 01/16] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v11 02/16] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v11 03/16] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v11 04/16] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v11 05/16] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v11 06/16] mkconfig: remove bashisms and cleanup config.mk generation
Allen Martin
- [U-Boot] [PATCH v11 07/16] MAKEALL: update to work with new boards.cfg syntax
Allen Martin
- [U-Boot] [PATCH v11 08/16] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v11 09/16] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v11 10/16] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v11 11/16] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v11 12/16] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v11 13/16] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v11 14/16] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v11 15/16] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v11 16/16] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] [PATCH v2 0/12] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH v2 0/18] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v2 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS
Lukasz Majewski
- [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs
Prabhakar Lad
- [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs
Tom Rini
- [U-Boot] [PATCH v2 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH v2 0/5] pci: light update work on common pci code
Andrew Sharp
- [U-Boot] [PATCH v2 0/5] Tegra 2 USB ULPI series
Lucas Stach
- [U-Boot] [PATCH v2 0/5] Tegra 2 USB ULPI series
Stephen Warren
- [U-Boot] [PATCH v2 0/9] enable thumb for tegra20
Allen Martin
- [U-Boot] [PATCH v2 0/9] enable thumb for tegra20
Stephen Warren
- [U-Boot] [PATCH v2 0/9] This patchset updates boards based on the TAM3517 SOM.
Stefano Babic
- [U-Boot] [PATCH V2 00/13] Basic Raspberyr Pi support
Stephen Warren
- [U-Boot] [PATCH V2 00/13] Basic Raspberyr Pi support
Tom Rini
- [U-Boot] [PATCH v2 01/12] SPL: Fix build problems on ARM with new SPL framework
Stefan Roese
- [U-Boot] [PATCH v2 01/12] SPL: Fix build problems on ARM with new SPL framework
Tom Rini
- [U-Boot] [PATCH V2 01/13] README: fix references to config_cmd_default.h
Stephen Warren
- [U-Boot] [PATCH v2 01/18] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v2 02/12] SPL: Use image_get_xxx() functions to access header values
Stefan Roese
- [U-Boot] [PATCH v2 02/12] SPL: Use image_get_xxx() functions to access header values
Tom Rini
- [U-Boot] [PATCH V2 02/13] ARM: add basic support for the Broadcom BCM2835 SoC
Stephen Warren
- [U-Boot] [PATCH v2 02/18] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v2 03/12] SPL: Add option to skip copying of the mkimage header
Stefan Roese
- [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board
Stephen Warren
- [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board
Tom Rini
- [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board
Tom Rini
- [U-Boot] [PATCH v2 03/18] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support
Stefan Roese
- [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support
Stefan Roese
- [U-Boot] [PATCH V2 04/13] ARM: arm1176: enable instruction cache in arch_cpu_init()
Stephen Warren
- [U-Boot] [PATCH v2 04/18] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v2 05/12] powerpc: Extract EPAPR_MAGIC constants into processor.h
Stefan Roese
- [U-Boot] [PATCH V2 05/13] ARM: rpi_b: enable CONFIG_ARCH_CPU_INIT for icache
Stephen Warren
- [U-Boot] [PATCH v2 05/18] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH V2 06/13] ARM: rpi_b: define CONFIG_MACH_TYPE
Stephen Warren
- [U-Boot] [PATCH v2 06/18] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v2 07/12] env: Extract getenv_f() into separate source file
Stefan Roese
- [U-Boot] [PATCH V2 07/13] ARM: rpi_b: include config_cmd_default.h
Stephen Warren
- [U-Boot] [PATCH v2 07/18] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v2 08/12] mpc5200: Add SPL support
Stefan Roese
- [U-Boot] [PATCH V2 08/13] ARM: rpi_b: enable booting the Linux kernel
Stephen Warren
- [U-Boot] [PATCH v2 08/18] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v2 09/11] New command clear: Clear the ANSI terminal
Wolfgang Denk
- [U-Boot] [PATCH v2 09/12] mpc5200: Add a3m071 board support
Stefan Roese
- [U-Boot] [PATCH V2 09/13] ARM: rpi_b: drop RAM size to 128M
Stephen Warren
- [U-Boot] [PATCH v2 09/18] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Stephen Warren
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once
Stephen Warren
- [U-Boot] [PATCH v2 1/2] arm/km: add mv88e6352 configuration for kmnusa
Valentin Longchamp
- [U-Boot] [PATCH v2 1/2] arm/km: add mv88e6352 configuration for kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH v2 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Marek Vasut
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Marek Vasut
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Marek Vasut
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
stefano babic
- [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
Stefano Babic
- [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
Marek Vasut
- [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
Marek Vasut
- [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH v2 1/2] sf: stmicro: support JEDEC standard two-byte signature
Stephan Linz
- [U-Boot] [PATCH v2 1/2] sf: stmicro: support JEDEC standard two-byte signature
Mike Frysinger
- [U-Boot] [PATCH v2 1/2] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH v2 1/4] DaVinci DA8xx: tidy up clock ID definition
Tom Rini
- [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards
Matt Sealey
- [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards
Stefano Babic
- [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards
Stefano Babic
- [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards
Stefano Babic
- [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller
Andy Fleming
- [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init
Stefano Babic
- [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init
Stefano Babic
- [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include
Otavio Salvador
- [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include
Marek Vasut
- [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include
Stefano Babic
- [U-Boot] [PATCH v2 1/4] nand: Add support for unlock.invert
Joe Hershberger
- [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile
Wolfgang Denk
- [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Josh Wu
- [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Andreas Bießmann
- [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Josh Wu
- [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Scott Wood
- [U-Boot] [PATCH v2 1/5] pci: fix errant data types and corresponding access functions
Andrew Sharp
- [U-Boot] [PATCH v2 1/5] tegra20: complete periph_id enum
Lucas Stach
- [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration
Michal Simek
- [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration
Stephan Linz
- [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration
Michal Simek
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Wolfgang Denk
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Wolfgang Denk
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] OMAP3: tam3517: add function to read MAC from EEPROM
Stefano Babic
- [U-Boot] [PATCH v2 1/9] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v2 10/12] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
Stefan Roese
- [U-Boot] [PATCH V2 10/13] ARM: rpi_b: move stack to top of RAM
Stephen Warren
- [U-Boot] [PATCH v2 10/18] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v2 11/12] Makefile: Add possibility to set entry-point for u-boot.img
Stefan Roese
- [U-Boot] [PATCH V2 11/13] ARM: bcm2835: implement reset using watchdog
Stephen Warren
- [U-Boot] [PATCH v2 11/18] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v2 12/12] Makefile: Add target for combined spl/u-boot.bin & u-boot.img
Stefan Roese
- [U-Boot] [PATCH V2 12/13] gpio: bcm2835: Add GPIO driver
Stephen Warren
- [U-Boot] [PATCH v2 12/18] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] [PATCH V2 13/13] rbpi: Add BCM2835 GPIO driver for raspberry pi
Stephen Warren
- [U-Boot] [PATCH v2 13/18] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v2 14/18] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Christian Riesch
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Prabhakar Lad
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Tom Rini
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Prabhakar Lad
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Tom Rini
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Prabhakar Lad
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Tom Rini
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Christian Riesch
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Prabhakar Lad
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Christian Riesch
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Prabhakar Lad
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Christian Riesch
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Prabhakar Lad
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Tom Rini
- [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm
Tom Rini
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Scott Wood
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Scott Wood
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Scott Wood
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH v2 18/18] SPL: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH v2 2/2] fsl_esdhc: Remove cache snooping for i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board
Lukasz Majewski
- [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Marek Vasut
- [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration
Stefano Babic
- [U-Boot] [PATCH v2 2/2] MX28: mx28evk: Enable SPI DMA
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx35 timer: Switch to 32-kHz source
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/2] mx35 timer: Switch to 32-kHz source
Stefano Babic
- [U-Boot] [PATCH v2 2/2] sf: stmicro: add support N25Q128 parts
Stephan Linz
- [U-Boot] [PATCH v2 2/3] mx51evk: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH v2 2/4] DaVinci DA850: UART2 clock ID comes from ASYNC3
Tom Rini
- [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument
Andy Fleming
- [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument
Jaehoon Chung
- [U-Boot] [PATCH v2 2/4] mx5: Optimize lowlevel_init code size
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/4] mxs: Remove not required include of iomux-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v2 2/4] nand: Change ulong to loff_t and size_t
Joe Hershberger
- [U-Boot] [PATCH v2 2/5] [cosmetic] pci: clean up some whitespace and formatting
Andrew Sharp
- [U-Boot] [PATCH v2 2/5] at91: atmel_nand: remove unused variables.
Scott Wood
- [U-Boot] [PATCH v2 2/5] at91: atmel_nand: remove unused variables.
Josh Wu
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v2 2/5] tegra20: add clock_set_pllout function
Lucas Stach
- [U-Boot] [PATCH v2 2/7] microblaze: board: Remove compilation warning
Michal Simek
- [U-Boot] [PATCH v2 2/7] microblaze: board: Remove compilation warning
Stephan Linz
- [U-Boot] [PATCH v2 2/9] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v2 2/9] OMAP3: twister : get MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Wolfgang Denk
- [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Kumar Gala
- [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Kumar Gala
- [U-Boot] [PATCH v2 3/3] mx35: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/3] mx53ard: Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Andy Fleming
- [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Minkyu Kang
- [U-Boot] [PATCH v2 3/4] mpc52xx: add common o2dnt and o2dnt2 support and configurations
Anatolij Gustschin
- [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3
Stefano Babic
- [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Stefano Babic
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Marek Vasut
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Stefano Babic
- [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
Otavio Salvador
- [U-Boot] [PATCH v2 3/4] nand: consolidate duplicated constants
Joe Hershberger
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Josh Wu
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Andreas Bießmann
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Scott Wood
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Josh Wu
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Scott Wood
- [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Josh Wu
- [U-Boot] [PATCH v2 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage
Andrew Sharp
- [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO
Wolfgang Denk
- [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 3/5] usb: fix ulpi_set_vbus prototype
Lucas Stach
- [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value
Michal Simek
- [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value
Stephan Linz
- [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value
Michal Simek
- [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value
Stephan Linz
- [U-Boot] [PATCH v2 3/9] OMAP3: mt_ventoux: Correct board pinmux
Stefano Babic
- [U-Boot] [PATCH v2 3/9] tegra20: remove inline assembly for u32 cast
Allen Martin
- [U-Boot] [PATCH v2 4/4] mmc: dw-mmc: add dw-mmc's confiuration at Makefile
Minkyu Kang
- [U-Boot] [PATCH v2 4/4] mmc: sdhci: add the udelay for completed post-request
Andy Fleming
- [U-Boot] [PATCH v2 4/4] mpc52xx: remove o2dnt board
Anatolij Gustschin
- [U-Boot] [PATCH v2 4/4] mxs: Convert sys_proto.h prefixes to 'mxs'
Otavio Salvador
- [U-Boot] [PATCH v2 4/4] nand: Make NAND lock status compatible with Micron
Joe Hershberger
- [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Josh Wu
- [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Andreas Bießmann
- [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Josh Wu
- [U-Boot] [PATCH v2 4/5] pci: update pci_ids.h with a few new entries
Andrew Sharp
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Lucas Stach
- [U-Boot] [PATCH v2 4/6] nand_spl: update udelay for Freescale boards
Matthew McClintock
- [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup
Michal Simek
- [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup
Stephan Linz
- [U-Boot] [PATCH v2 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
Allen Martin
- [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
Stephen Warren
- [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
Allen Martin
- [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
V, Aneesh
- [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
Stephen Warren
- [U-Boot] [PATCH v2 4/9] OMAP3: mt_ventoux: activate GPIO4
Stefano Babic
- [U-Boot] [PATCH v2 5/5] at91: 9x5: Enable PMECC for 5series ek board.
Josh Wu
- [U-Boot] [PATCH v2 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done
Andrew Sharp
- [U-Boot] [PATCH v2 5/5] tegra20: add USB ULPI init code
Lucas Stach
- [U-Boot] [PATCH v2 5/6] nand_spl: p1023rds: wait before enabling DDR controller
Matthew McClintock
- [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization
Stephan Linz
- [U-Boot] [PATCH v2 5/9] arm: use thumb compatible return in arm720t
Allen Martin
- [U-Boot] [PATCH v2 5/9] OMAP3: mt_ventoux: read MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH v2 6/7] microblaze: Clean microblaze initialization
Stephan Linz
- [U-Boot] [PATCH v2 6/7] microblaze: Clean microblaze initialization
Michal Simek
- [U-Boot] [PATCH v2 6/9] arm: change arm720t to armv4t
Allen Martin
- [U-Boot] [PATCH v2 6/9] OMAP3: mt_ventoux: disable the buzzer at start-up
Stefano Babic
- [U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE
Michal Simek
- [U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE
Stephan Linz
- [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()
Stefano Babic
- [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()
Stefano Babic
- [U-Boot] [PATCH v2 7/9] arm720t: add linkage macro for relocate_code
Allen Martin
- [U-Boot] [PATCH v2 7/9] video: drop duplicate set of DISPC_CONFIG register
Jeroen Hofstee
- [U-Boot] [PATCH v2 7/9] video: drop duplicate set of DISPC_CONFIG register
Stefano Babic
- [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
Allen Martin
- [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
V, Aneesh
- [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
Allen Martin
- [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
V, Aneesh
- [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
Allen Martin
- [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters
Stefano Babic
- [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters
Heiko Schocher
- [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters
Jeroen Hofstee
- [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters
Tom Rini
- [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters
Stefano Babic
- [U-Boot] [PATCH v2 9/9] OMAP3: mt_ventoux: added video support
Stefano Babic
- [U-Boot] [PATCH v2 9/9] tegra20: enable thumb build
Allen Martin
- [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.
Jeroen Hofstee
- [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.
Jeroen Hofstee
- [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.
Tom Rini
- [U-Boot] [PATCH v2] arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support PFC of Renesas R8A7740
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support PFC of Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas R8A7740
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH V2] common/lcd: add protection from null bmp pointer
Nikita Kiryanov
- [U-Boot] [PATCH v2] Consider CONFIG_ZERO_BOOTDELAY_CHECK when CONFIG_AUTOBOOT_KEYED is set
Wolfgang Denk
- [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs
Prafulla Wadaskar
- [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] [PATCH V2] dm: mips: Import libgcc components from Linux
Daniel Schwierzeck
- [U-Boot] [PATCH v2] doc/git-mailrc: Add 'rmobile' alias
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Matt Sealey
- [U-Boot] [PATCH v2] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Stefano Babic
- [U-Boot] [PATCH v2] efikamx: update to Efika MX Smarttop and Smartbook boards
Matt Sealey
- [U-Boot] [PATCH v2] efikamx: update to Efika MX Smarttop and Smartbook boards
Stefano Babic
- [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Simon Glass
- [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Michal Simek
- [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Anatolij Gustschin
- [U-Boot] [PATCH v2] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH v2] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH v2] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH v2] integrator: break out common config
Tom Rini
- [U-Boot] [PATCH v2] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH v2] kw_spi: fix clock prescaler computation
Valentin Longchamp
- [U-Boot] [PATCH v2] kw_spi: fix clock prescaler computation
Prafulla Wadaskar
- [U-Boot] [PATCH v2] MAKEALL: fix per arch board lists
Allen Martin
- [U-Boot] [PATCH v2] MAKEALL: fix per arch board lists
Tom Rini
- [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB
Daniel Schwierzeck
- [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB
Kim Phillips
- [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB
Detlev Zundel
- [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver
Andy Fleming
- [U-Boot] [PATCH v2] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
Holger Brunck
- [U-Boot] [PATCH v2] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
Stefan Roese
- [U-Boot] [PATCH v2] mx25: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH V2] MX28: Add SchulerControl SC_SPS_1 platform
Marek Vasut
- [U-Boot] [PATCH V2] MX28: Add SchulerControl SC_SPS_1 platform
Stefano Babic
- [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value
Benoît Thébaudeau
- [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value
Stefano Babic
- [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value
Stefano Babic
- [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include
Stefano Babic
- [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include
Stefano Babic
- [PATCH v2] mx5:Use IMX_GPIO_NR macro
Ashok Kumar Reddy
- [U-Boot] [PATCH v2] mx5:Use IMX_GPIO_NR macro
Ashok
- [U-Boot] [PATCH v2] mx5:Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH v2] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH v2] net: asix: add support for AX88772B
Lucas Stach
- [U-Boot] [PATCH v2] net: asix: add support for AX88772B
Marek Vasut
- [U-Boot] [PATCH v2] net: asix: add support for AX88772B
Mike Frysinger
- [U-Boot] [PATCH v2] net: asix: add support for AX88772B
Joe Hershberger
- [U-Boot] [PATCH v2] net: Improve the speed of netconsole
Joe Hershberger
- [U-Boot] [PATCH v2] net: Improve the speed of netconsole
Stefano Babic
- [U-Boot] [PATCH v2] net: Improve the speed of netconsole
Joe Hershberger
- [U-Boot] [PATCH v2] net: Make netconsole src and dest ports configurable
Mike Frysinger
- [U-Boot] [PATCH v2] net: Make the netconsole buffer size configurable
Mike Frysinger
- [U-Boot] [PATCH v2] powerpc/85xx: clear out TLB on boot
Scott Wood
- [U-Boot] [PATCH v2] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional
York Sun
- [U-Boot] [PATCH v2] powerpc/p1_p2_rdb_pc: print -PC suffix in board name
Scott Wood
- [U-Boot] [PATCH v2] README: Add handy kermit primer
Karl O. Pinc
- [U-Boot] [PATCH v2] README: Reference nand monitor commands in U-Boot README
Karl O. Pinc
- [U-Boot] [PATCH v2] README: Reference nand monitor commands in U-Boot README
Wolfgang Denk
- [U-Boot] [PATCH v2] rmobile: Add README
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] rmobile: Add README
Tom Rini
- [U-Boot] [PATCH v2] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] [PATCH v2] rtc: imxdi: Initial support
Stefano Babic
- [U-Boot] [PATCH v2] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] [PATCH v2] rtc: imxdi: Initial support
Stefano Babic
- [U-Boot] [PATCH v2] sh: Add support pin function control using GPIO
Nobuhiro Iwamatsu
- [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size
Stefano Babic
- [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size
Stefan Roese
- [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v2] usb: do explicit unaligned accesses
Lucas Stach
- [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP
Prabhakar Lad
- [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP
Stefan Roese
- [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP
Stefano Babic
- [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP
Christian Riesch
- [U-Boot] [PATCH v3 0/2] Add GPIO driver for BCM2835 SoC
Stephen Warren
- [U-Boot] [Patch V3 0/4] add mips64 cpu support
Zhizhou Zhang
- [U-Boot] [Patch V3 0/4] add mips64 cpu support
Zhizhou Zhang
- [U-Boot] [Patch V3 0/4] add mips64 cpu support
Mike Frysinger
- [U-Boot] [Patch V3 0/4] add mips64 cpu support
Zhi-zhou Zhang
- [U-Boot] [Patch V3 0/4] add mips64 cpu support
Daniel Schwierzeck
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Nikita Kiryanov
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Nikita Kiryanov
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Nikita Kiryanov
- [U-Boot] [PATCH v3 0/4] mmc: sdhci: fixed some problems for Exynos
Jaehoon Chung
- [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support
Josh Wu
- [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support
Andreas Bießmann
- [U-Boot] [PATCH v3 0/6] Code cleaup for trats and universal
Piotr Wilczek
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Wolfgang Denk
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Gerlando Falauto
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Wolfgang Denk
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Holger Brunck
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Wolfgang Denk
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Holger Brunck
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Wolfgang Denk
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Gerlando Falauto
- [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default
Marek Vasut
- [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support
Tom Rini
- [U-Boot] [PATCH v3 0/9] enable thumb for tegra20
Allen Martin
- [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.
Stefano Babic
- [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.
Tom Rini
- [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.
Tom Rini
- [U-Boot] [PATCH v3 01/19] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v3 02/19] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v3 03/19] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v3 04/19] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v3 05/19] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v3 06/19] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v3 07/19] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v3 08/19] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v3 09/19] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver
Vikram Narayanan
- [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver
Stephen Warren
- [U-Boot] [PATCH v3 1/2] mxc: Define architecture identifier
Benoît Thébaudeau
- [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data
Mike Frysinger
- [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data
Marek Vasut
- [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data
Lucas Stach
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Troy Kisky
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Stefano Babic
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Troy Kisky
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Eric Nelson
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
stefano babic
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
stefano babic
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Troy Kisky
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Troy Kisky
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Eric Nelson
- [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
Stefano Babic
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Zhizhou Zhang
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Zhizhou Zhang
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Mike Frysinger
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Zhi-zhou Zhang
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Daniel Schwierzeck
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Zhi-zhou Zhang
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Zhi-zhou Zhang
- [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus
Daniel Schwierzeck
- [U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands
Wolfgang Denk
- [U-Boot] [PATCH V3 1/4] common lcd: simplify lcd_logo
Nikita Kiryanov
- [U-Boot] [PATCH v3 1/4] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B
Jaehoon Chung
- [U-Boot] [PATCH V3 1/4] README: fix references to config_cmd_default.h
Stephen Warren
- [U-Boot] [PATCH v3 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Josh Wu
- [U-Boot] [PATCH v3 1/6] arm:exynos4:trats: Correct SDRAM configuration for trats
Piotr Wilczek
- [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.
Mike Frysinger
- [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Marek Vasut
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Marek Vasut
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Marek Vasut
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Marek Vasut
- [U-Boot] [PATCH v3 1/9] OMAP3: tam3517: add function to read MAC from EEPROM
Stefano Babic
- [U-Boot] [PATCH v3 1/9] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v3 10/19] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v3 11/19] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v3 12/19] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update
Lukasz Majewski
- [U-Boot] [PATCH v3 13/19] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v3 14/19] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v3 15/19] spl: Make CONFIG_SPL_FRAMEWORK board_init_f __weak
Tom Rini
- [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Christian Riesch
- [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v3 17/19] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v3 17/19] da850: Add README.da850
Christian Riesch
- [U-Boot] [PATCH v3 17/19] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v3 18/19] SPL: Enhance drivers/mtd/nand/nand_spl_load.c
Tom Rini
- [U-Boot] [PATCH v3 19/19] SPL: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH v3 2/2] fsl_esdhc: Remove cache snooping for i.MX
Benoît Thébaudeau
- [U-Boot] [Patch v3 2/2] net: asix: add support for AX88772B
Lucas Stach
- [U-Boot] [Patch v3 2/2] net: asix: add support for AX88772B
Mike Frysinger
- [U-Boot] [PATCH V3 2/3] mx6qsabrelite: add resetmode support
Troy Kisky
- [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files
Daniel Schwierzeck
- [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files
Zhizhou Zhang
- [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files
Zhizhou Zhang
- [U-Boot] [PATCH v3 2/4] Allow newlines within command environment vars
Wolfgang Denk
- [U-Boot] [PATCH V3 2/4] ARM: arm1176: enable instruction cache in arch_cpu_init()
Stephen Warren
- [U-Boot] [PATCH V3 2/4] common lcd: simplify lcd_display
Nikita Kiryanov
- [U-Boot] [PATCH v3 2/4] mmc: s5p_sdhci: fixed wrong function argument
Jaehoon Chung
- [U-Boot] [PATCH v3 2/5] at91: atmel_nand: remove unused variables.
Josh Wu
- [U-Boot] [PATCH v3 2/6] arm:exynos4:trats: Fix SDRAM size
Piotr Wilczek
- [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Mike Frysinger
- [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH v3 2/8] ehci: Fail for multi-transaction interrupt transfers
Marek Vasut
- [U-Boot] [PATCH v3 2/8] ehci: Fail for multi-transaction interrupt transfers
Benoît Thébaudeau
- [U-Boot] [PATCH v3 2/9] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v3 2/9] OMAP3: twister : get MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH V3 3/3] mx53evk: add resetmode support
Troy Kisky
- [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs
Zhizhou Zhang
- [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs
Zhizhou Zhang
- [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs
Daniel Schwierzeck
- [U-Boot] [PATCH V3 3/4] ARM: add basic support for the Broadcom BCM2835 SoC
Stephen Warren
- [U-Boot] [PATCH V3 3/4] common lcd: simplify core functions
Nikita Kiryanov
- [U-Boot] [PATCH v3 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Jaehoon Chung
- [U-Boot] [PATCH v3 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Jaehoon Chung
- [U-Boot] [PATCH v3 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Josh Wu
- [U-Boot] [PATCH v3 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc
Piotr Wilczek
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Mike Frysinger
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Mike Frysinger
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Marek Vasut
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Mike Frysinger
- [U-Boot] [PATCH v3 3/8] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v3 3/8] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v3 3/9] OMAP3: mt_ventoux: Correct board pinmux
Stefano Babic
- [U-Boot] [PATCH v3 3/9] tegra20: remove inline assembly for u32 cast
Allen Martin
- [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64
Daniel Schwierzeck
- [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64
Zhi-zhou Zhang
- [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64
Daniel Schwierzeck
- [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64
Zhizhou Zhang
- [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64
Zhizhou Zhang
- [U-Boot] [PATCH V3 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC
Stephen Warren
- [U-Boot] [PATCH V3 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC
Tom Rini
- [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board
Wolfgang Denk
- [U-Boot] [PATCH V3 4/4] common lcd: simplify lcd_display_bitmap
Nikita Kiryanov
- [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value
Andy Fleming
- [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value
Jaehoon Chung
- [U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution
Wolfgang Denk
- [U-Boot] [PATCH v3 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Josh Wu
- [U-Boot] [PATCH v3 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Bo Shen
- [U-Boot] [PATCH v3 4/6] arm:exynos4:trats: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH v3 4/6] nand_spl: update udelay for Freescale boards
Matthew McClintock
- [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation
Mike Frysinger
- [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v3 4/8] usb_storage: Restore non-EHCI support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 4/9] arm: add _thumb1_case_uqi to libgcc
Allen Martin
- [U-Boot] [PATCH v3 4/9] OMAP3: mt_ventoux: activate GPIO4
Stefano Babic
- [U-Boot] [PATCH v3 5/5] at91: 9x5: Enable PMECC for 5series ek board.
Josh Wu
- [U-Boot] [PATCH v3 5/6] arm:exynos4:universal: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Stephen Warren
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Stephen Warren
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Stephen Warren
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 5/8] usb_storage: Remove EHCI constraints
Benoît Thébaudeau
- [U-Boot] [PATCH v3 5/9] arm: use thumb compatible return in arm720t
Allen Martin
- [U-Boot] [PATCH v3 5/9] OMAP3: mt_ventoux: read MAC address from EEPROM
Stefano Babic
- [U-Boot] [PATCH v3 6/6] arm:exynos4:universal: Eliminated low level init
Piotr Wilczek
- [U-Boot] [PATCH v3 6/8] usb_storage: Adjust time-outs
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/9] arm: change arm720t to armv4t
Allen Martin
- [U-Boot] [PATCH v3 6/9] OMAP3: mt_ventoux: disable the buzzer at start-up
Stefano Babic
- [U-Boot] [PATCH v3 7/8] usb_stor_BBB_transport: Do not delay when not required
Benoît Thébaudeau
- [U-Boot] [PATCH v3 7/9] arm720t: add linkage macro for relocate_code
Allen Martin
- [U-Boot] [PATCH v3 7/9] video: drop duplicate set of DISPC_CONFIG register
Stefano Babic
- [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations
Benoît Thébaudeau
- [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations
Marek Vasut
- [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations
Marek Vasut
- [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations
Benoît Thébaudeau
- [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations
Marek Vasut
- [U-Boot] [PATCH v3 8/9] arm: use thumb interworking returns in libgcc
Allen Martin
- [U-Boot] [PATCH v3 8/9] OMAP3: video: add macros to set display parameters
Stefano Babic
- [U-Boot] [PATCH v3 9/9] OMAP3: mt_ventoux: added video support
Stefano Babic
- [U-Boot] [PATCH v3 9/9] tegra20: enable thumb build
Allen Martin
- [U-Boot] [PATCH v3] arm: rmobile: Add basic support for Renesas R-Mobile
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0
Mike Frysinger
- [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Wolfgang Denk
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Mike Frysinger
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Stefan Roese
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Andreas Bießmann
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Stefan Roese
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Andreas Bießmann
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Stefan Roese
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Andreas Bießmann
- [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount
Christian Riesch
- [U-Boot] [PATCH v3] global_data: unify global flag defines
Wolfgang Denk
- [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH V3] MX28: Add SchulerControl SC_SPS_1 platform
Marek Vasut
- [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization
Marek Vasut
- [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization
Otavio Salvador
- [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization
Marek Vasut
- [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization
Otavio Salvador
- [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization
Marek Vasut
- [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization
Stefano Babic
- [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization
Stefano Babic
- [PATCH v3] mx5:Use IMX_GPIO_NR macro
Ashok Kumar Reddy
- [U-Boot] [PATCH v3] mx5:Use IMX_GPIO_NR macro
Ashok
- [U-Boot] [PATCH v3] mx5:Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX
stefano babic
- [U-Boot] [PATCH v3] patman: Do not Cc addresses included in To list
Otavio Salvador
- [U-Boot] [PATCH v3] powerpc/85xx: clear out TLB on boot
Scott Wood
- [U-Boot] [PATCH v3] powerpc/85xx: clear out TLB on boot
Prabhakar Kushwaha
- [U-Boot] [PATCH v3] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] [PATCH v3] rtc: imxdi: Initial support
Stefano Babic
- [U-Boot] [PATCH v3]: video: support exynos fimd driver for various exynos series
Minkyu Kang
- [U-Boot] [PATCH v4 0/20] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v4 0/20] ARM: SPL: Make more generic, merge DaVinci and OMAP
Sughosh Ganu
- [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support
Zhizhou Zhang
- [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support
Zhizhou Zhang
- [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support
Daniel Schwierzeck
- [U-Boot] [PATCH v4 0/5] OMAP: SPL networking support
Ilya Yanok
- [U-Boot] [PATCH v4 0/7] dfu:usb: DFU support via USB Download gadget
Lukasz Majewski
- [U-Boot] [PATCH v4 0/7] ehci: Improve performance
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/7] ehci: Improve performance
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/7] ehci: Improve performance
Marek Vasut
- [U-Boot] [PATCH v4 0/7] ehci: Improve performance
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/7] ehci: Improve performance
Marek Vasut
- [U-Boot] [PATCH v4 0/7] env: handle special variables and selective env default
Gerlando Falauto
- [U-Boot] [PATCH v4 01/20] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v4 02/20] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v4 03/20] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v4 04/20] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v4 05/20] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v4 06/20] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v4 07/20] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v4 08/20] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v4 09/20] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Mike Frysinger
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Graeme Russ
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Mike Frysinger
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Wolfgang Denk
- [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
Troy Kisky
- [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
Stefano Babic
- [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
Stefano Babic
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Zhizhou Zhang
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Zhizhou Zhang
- [U-Boot] [PATCH V4 1/4] README: fix references to config_cmd_default.h
Stephen Warren
- [U-Boot] [PATCH V4 1/4] README: fix references to config_cmd_default.h
Tom Rini
- [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also
Ilya Yanok
- [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also
Joe Hershberger
- [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also
Ilya Yanok
- [U-Boot] [PATCH v4 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH v4 1/7] ehci: cosmetic: Define used constants
Benoît Thébaudeau
- [U-Boot] [PATCH v4 1/7] env: cosmetic: drop assignment i = iomux_doenv()
Gerlando Falauto
- [U-Boot] [PATCH v4 1/7] env: cosmetic: drop assignment i = iomux_doenv()
Marek Vasut
- [U-Boot] [PATCH v4 10/20] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Sughosh Ganu
- [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v4 12/20] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v4 13/20] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v4 14/20] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v4 15/20] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux
Tom Rini
- [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size
Sughosh Ganu
- [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v4 17/20] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v4 18/20] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Scott Wood
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Scott Wood
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Scott Wood
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Scott Wood
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
Tom Rini
- [U-Boot] [PATCH v4 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH V4 2/3] mx6qsabrelite: add boot_mode support
Troy Kisky
- [U-Boot] [PATCH V4 2/4] ARM: arm1176: enable instruction cache in arch_cpu_init()
Stephen Warren
- [U-Boot] [Patch V4 2/4] MIPS: change related header files
Zhizhou Zhang
- [U-Boot] [Patch V4 2/4] MIPS: change related header files
Zhizhou Zhang
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Tom Rini
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Tom Rini
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Tom Rini
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Ilya Yanok
- [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined
Tom Rini
- [U-Boot] [PATCH v4 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH v4 2/7] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v4 2/7] env: unify logic to check and apply changes
Marek Vasut
- [U-Boot] [PATCH v4 2/7] env: unify logic to check and apply changes
Gerlando Falauto
- [U-Boot] [PATCH v4 20/20] SPL: SPI: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH V4 3/3] mx53evk: add boot_mode support
Troy Kisky
- [U-Boot] [PATCH V4 3/4] ARM: add basic support for the Broadcom BCM2835 SoC
Stephen Warren
- [U-Boot] [Patch V4 3/4] MIPS: add board qemu-mips64 support
Zhizhou Zhang
- [U-Boot] [Patch V4 3/4] MIPS: add board qemu-mips64 support
Zhizhou Zhang
- [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL
Ilya Yanok
- [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL
Tom Rini
- [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL
Ilya Yanok
- [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL
Tom Rini
- [U-Boot] [PATCH v4 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v4 3/7] env: make himport_r() selective on variables
Marek Vasut
- [U-Boot] [PATCH v4 3/7] env: make himport_r() selective on variables
Gerlando Falauto
- [U-Boot] [PATCH v4 3/7] usb_storage: Restore non-EHCI support
Benoît Thébaudeau
- [U-Boot] [PATCH V4 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC
Stephen Warren
- [U-Boot] [PATCH V4 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC
Tom Rini
- [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support
Zhizhou Zhang
- [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support
Zhizhou Zhang
- [U-Boot] [PATCH v4 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v4 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v4 4/7] env: add check/apply logic to himport_r()
Marek Vasut
- [U-Boot] [PATCH v4 4/7] env: add check/apply logic to himport_r()
Gerlando Falauto
- [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints
Benoît Thébaudeau
- [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints
Ilya Yanok
- [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints
Benoît Thébaudeau
- [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints
Marek Vasut
- [U-Boot] [PATCH v4 5/5] am335x_evm: enable networking in SPL
Ilya Yanok
- [U-Boot] [PATCH v4 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v4 5/7] env: check and apply changes on delete/destroy
Gerlando Falauto
- [U-Boot] [PATCH v4 5/7] env: check and apply changes on delete/destroy
Marek Vasut
- [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs
Benoît Thébaudeau
- [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs
Ilya Yanok
- [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs
Benoît Thébaudeau
- [U-Boot] [PATCH v4 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Gerlando Falauto
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Marek Vasut
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Gerlando Falauto
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Marek Vasut
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Gerlando Falauto
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Marek Vasut
- [U-Boot] [PATCH v4 6/7] usb_stor_BBB_transport: Do not delay when not required
Benoît Thébaudeau
- [U-Boot] [PATCH v4 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Lukasz Majewski
- [U-Boot] [PATCH v4 7/7] ehci: Optimize qTD allocations
Benoît Thébaudeau
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Marek Vasut
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Gerlando Falauto
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Marek Vasut
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Gerlando Falauto
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Gerlando Falauto
- [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH v4] Consolidate bootcount code into drivers/bootcount
Stefan Roese
- [U-Boot] [PATCH v4] Consolidate bootcount code into drivers/bootcount
Mike Frysinger
- [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX
Matt Sealey
- [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH v4] tx25: Use generic gpio_* calls
Anatolij Gustschin
- [U-Boot] [PATCH v5 0/25] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v5 0/7] dfu:usb: DFU support via USB Download gadget
Marek Vasut
- [U-Boot] [PATCH v5 0/7] dfu:usb: DFU support via USB Download gadget
Lukasz Majewski
- [U-Boot] [PATCH v5 01/25] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v5 02/25] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v5 03/25] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v5 04/25] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v5 05/25] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v5 06/25] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v5 07/25] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v5 08/25] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v5 09/25] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support
Wolfgang Denk
- [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Rob Herring
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Rob Herring
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Rob Herring
- [U-Boot] [PATCH v5 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH v5 10/25] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v5 11/25] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v5 12/25] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v5 13/25] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v5 14/25] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v5 15/25] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux
Tom Rini
- [U-Boot] [PATCH v5 16/25] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v5 17/25] SPL: Use image_get_xxx() functions to access header values
Tom Rini
- [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Tom Rini
- [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Scott Wood
- [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Tom Rini
- [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Scott Wood
- [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Tom Rini
- [U-Boot] [PATCH v5 19/25] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH V5 2/2] ext4fs write support
Wolfgang Denk
- [U-Boot] [PATCH V5 2/2] ext4fs write support
Wolfgang Denk
- [U-Boot] [PATCH V5 2/2] ext4fs write support
uma.shankar at samsung.com
- [U-Boot] [PATCH v5 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH v5 20/25] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v5 20/25] da850: Add README.da850
Christian Riesch
- [U-Boot] [PATCH v5 20/25] da850: Add README.da850
Christian Riesch
- [U-Boot] [PATCH v5 20/25] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v5 20/25] da850: Add README.da850
Prabhakar Lad
- [U-Boot] [PATCH v5 21/25] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH v5 22/25] SPL: Add option to skip copying of the mkimage header
Tom Rini
- [U-Boot] [PATCH v5 23/25] SPL: SPI: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH v5 24/25] SPL: Make un-supported boot device puts a debug instead
Tom Rini
- [U-Boot] [PATCH v5 25/25] SPL: Rework how we inform about un-headered images
Tom Rini
- [U-Boot] [PATCH v5 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Joe Hershberger
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Tom Rini
- [U-Boot] [PATCH v5 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v5 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v5 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH v5 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Lukasz Majewski
- [U-Boot] [PATCH v5 7/7] env: delete selected vars not present in imported env
Marek Vasut
- [U-Boot] [PATCH v5 7/7] env: delete selected vars not present in imported env
Gerlando Falauto
- [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0
Mike Frysinger
- [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v5] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount
Stefan Roese
- [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount
Mike Frysinger
- [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount
Christian Riesch
- [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.
Benoît Thébaudeau
- [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.
Benoît Thébaudeau
- [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.
Benoît Thébaudeau
- [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.
Daniel Gachet
- [U-Boot] [PATCH v6 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v6 01/29] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v6 02/29] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v6 03/29] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v6 04/29] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v6 05/29] omap-common: SPL: Fix whitespace in omap-common/u-boot-spl.lds.
Tom Rini
- [U-Boot] [PATCH v6 06/29] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v6 07/29] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v6 08/29] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v6 09/29] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v6 10/29] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH v6 11/29] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v6 12/29] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v6 13/29] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v6 14/29] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v6 15/29] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v6 16/29] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux
Tom Rini
- [U-Boot] [PATCH v6 17/29] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v6 18/29] SPL: Use image_get_xxx() functions to access header values
Tom Rini
- [U-Boot] [PATCH v6 19/29] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Tom Rini
- [U-Boot] [PATCH v6 20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v6 21/29] hawkboard: Update config file to work with common spl framework
Tom Rini
- [U-Boot] [PATCH v6 22/29] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v6 23/29] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH v6 24/29] SPL: Add option to skip copying of the mkimage header
Tom Rini
- [U-Boot] [PATCH v6 25/29] SPL: SPI: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH v6 26/29] SPL: Enable use of custom defined U-Boot entry point
Tom Rini
- [U-Boot] [PATCH v6 27/29] SPL: Make un-supported boot device puts a debug instead
Tom Rini
- [U-Boot] [PATCH v6 28/29] SPL: Rework how we inform about un-headered images
Tom Rini
- [U-Boot] [PATCH v6 29/29] SPL: Add support for loading image from ram in SPL.
Tom Rini
- [U-Boot] [PATCH v6] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v6] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH v6] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH v8 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v8 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v8 01/15] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v8 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v8 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v8 04/15] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v8 05/15] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v8 06/15] mkconfig: add support for SPL CPU
Allen Martin
- [U-Boot] [PATCH v8 07/15] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v8 08/15] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v8 09/15] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v8 10/15] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v8 11/15] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v8 12/15] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v8 13/15] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v8 14/15] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v8 15/15] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] [PATCH v9 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v9 01/15] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v9 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v9 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v9 04/15] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v9 05/15] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v9 06/15] mkconfig: remove bashisms and cleanup config.mk generation
Allen Martin
- [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build
Zhong Hongbo
- [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build
Zhong Hongbo
- [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build
Albert ARIBAUD
- [U-Boot] [PATCH v9 08/15] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v9 09/15] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v9 10/15] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v9 11/15] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v9 12/15] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v9 13/15] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v9 14/15] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v9 15/15] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] [PATCH, v2] dts/Makefile: Turn off some predefined macros
Wolfgang Denk
- [U-Boot] [PATCH] Add a command to access the system timer
Joe Hershberger
- [U-Boot] [PATCH] Add a command to access the system timer
Mike Frysinger
- [U-Boot] [PATCH] Add a memory get command
Joe Hershberger
- [U-Boot] [PATCH] Add a memory get command
Mike Frysinger
- [U-Boot] [PATCH] Add a new "ini" command
Joe Hershberger
- [U-Boot] [PATCH] Add a new "ini" command
Mike Frysinger
- [U-Boot] [PATCH] Add doc/README.kbd
Wolfgang Denk
- [U-Boot] [PATCH] Add support for DS1388.
Wolfgang Denk
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Matt Sealey
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Stefano Babic
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Matt Sealey
- [U-Boot] [PATCH] Allow runtime configuration of "zero-delay" check
Joe Hershberger
- [U-Boot] [PATCH] am335x_evm: enable SMSC PHY driver
Ilya Yanok
- [U-Boot] [PATCH] am335x_evm: enable SMSC PHY driver
Tom Rini
- [U-Boot] [PATCH] am33xx: Remove redundant timer config
Tom Rini
- [U-Boot] [PATCH] ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT
Bo Shen
- [U-Boot] [PATCH] ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT
Andreas Bießmann
- [U-Boot] [PATCH] arm/km: fix frequency of the SPI NOR Flash
Valentin Longchamp
- [U-Boot] [PATCH] arm/km: fix frequency of the SPI NOR Flash
Prafulla Wadaskar
- [U-Boot] [PATCH] arm/km: remove unused code
Holger Brunck
- [U-Boot] [PATCH] arm/km: remove unused code
Prafulla Wadaskar
- [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF
Benoît Thébaudeau
- [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush
Marek Vasut
- [U-Boot] [PATCH] arm: Add CONFIG_OF_BOARD_SETUP support to bootm
Joe Hershberger
- [U-Boot] [PATCH] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [PATCH] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Prafulla Wadaskar
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Tom Rini
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Prafulla Wadaskar
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Simon Guinot
- [U-Boot] [PATCH] arm: Remove additional config flags
Michal Simek
- [U-Boot] [PATCH] arm: rmobile: Add supoprt for ATMARK-TECHNO Armadillo-800EVA board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Add support PFC of Renesas R8A7740
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Add support Renesas R8A7740
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Add support TMU base timer function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Change initializing ICCICR register
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board config file
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
Bo Shen
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
Andreas Bießmann
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
Andreas Bießmann
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
esw at bus-elektronik.de
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
Bo Shen
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
Bo Shen
- [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board
Lukasz Majewski
- [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board
Minkyu Kang
- [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board
Lukasz Majewski
- [U-Boot] [PATCH] arm:exynos4:universal_c210: implement software SPI
Piotr Wilczek
- [U-Boot] [PATCH] arm:exynos: Enable data cache at exynos based processors.
Lukasz Majewski
- [U-Boot] [PATCH] arm:exynos: Enable data cache at exynos based processors.
Minkyu Kang
- [U-Boot] [PATCH] armv7 cpu_init_crit: Simplify code
Benoît Thébaudeau
- [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S
Tom Rini
- [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S
Benoît Thébaudeau
- [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S
Tom Rini
- [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S
Benoît Thébaudeau
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] at91sam9263ek: remove unnecessary console_init_f
Andreas Bießmann
- [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk
Bo Shen
- [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk
Andreas Bießmann
- [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk
Bo Shen
- [U-Boot] [PATCH] avr32: add atngw100mkii board
Andreas Bießmann
- [U-Boot] [PATCH] avr32: Remove redundant LDSCRIPT definition
Benoît Thébaudeau
- [U-Boot] [PATCH] avr32: Remove redundant LDSCRIPT definition
Andreas Bießmann
- [U-Boot] [PATCH] avr32:portmux: fix setup for macb1
Andreas Bießmann
- [U-Boot] [PATCH] block: systemace: Simplify base and width initialization
Michal Simek
- [U-Boot] [PATCH] block: systemace: Simplify base and width initialization
Michal Simek
- [PATCH] cache: wip: Test program to evaluate if L2 is working.
Lukasz Majewski
- [PATCH] cache:L2: Provide *_cache_{enable|disable} function calls
Lukasz Majewski
- [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection
Anatolij Gustschin
- [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection
Stefan Roese
- [U-Boot] [PATCH] Change dead code in "test" cmd to debug output
Joe Hershberger
- [U-Boot] [PATCH] Change dead code in "test" cmd to debug output
Mike Frysinger
- [U-Boot] [PATCH] Cleanup cache command prints
Joe Hershberger
- [U-Boot] [PATCH] Cleanup cache command prints
Mike Frysinger
- [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer
Jeroen Hofstee
- [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer
Jeroen Hofstee
- [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer
Nikita Kiryanov
- [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer
Nikita Kiryanov
- [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake
Marek Vasut
- [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake
Daniel Schwierzeck
- [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake
Marek Vasut
- [U-Boot] [PATCH] config: Always use GNU ld
Otavio Salvador
- [U-Boot] [PATCH] config: Always use GNU ld
Mike Frysinger
- [U-Boot] [PATCH] config: Always use GNU ld
Otavio Salvador
- [U-Boot] [PATCH] config: Always use GNU ld
Otavio Salvador
- [U-Boot] [PATCH] config: Always use GNU ld
Anatolij Gustschin
- [U-Boot] [PATCH] configs: Remove unused symbol CONFIG_DISCOVER_PHY
Wolfgang Denk
- [U-Boot] [PATCH] cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.
Karl O. Pinc
- [U-Boot] [PATCH] cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.
Prafulla Wadaskar
- [U-Boot] [PATCH] cosmetic: Reference nand monitor commands in U-Boot README
Karl O. Pinc
- [U-Boot] [PATCH] Credits for MCF5249 initialization code
Jeremy Andrus
- [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller
Sughosh Ganu
- [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller
Sughosh Ganu
- [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller
Tom Rini
- [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller
Tom Rini
- [U-Boot] [PATCH] davinci: enbw_cmc: change switch init behaviour
Heiko Schocher
- [U-Boot] [PATCH] davinci: enbw_cmc: change switch init behaviour
Tom Rini
- [U-Boot] [PATCH] devkit8000: add rootwait to mmcboot option
Andreas Bießmann
- [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file
Wolfgang Denk
- [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file
Zhong Hongbo
- [U-Boot] [PATCH] disk: generate GUID Partiton Tables
Wolfgang Denk
- [U-Boot] [PATCH] disk: generate GUID Partiton Tables
Kyungmin Park
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Mike Frysinger
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Simon Glass
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH] doc/git-mailrc: Update 'ti' alias
Tom Rini
- [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32
Andreas Bießmann
- [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32
Andreas Bießmann
- [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)
Wolfgang Denk
- [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)
Kumar Gala
- [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)
Kumar Gala
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Wolfgang Denk
- [U-Boot] [PATCH] edminiv2: orion5x: fix GPIO inits and values
Albert ARIBAUD
- [U-Boot] [PATCH] edminiv2: orion5x: fix GPIO inits and values
Prafulla Wadaskar
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Matt Sealey
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Marek Vasut
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Matt Sealey
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Stefano Babic
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Matt Sealey
- [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot
Matt Sealey
- [U-Boot] [PATCH] efikamx: update MAINTAINERS for Genesi Efika MX systems
Matt Sealey
- [U-Boot] [PATCH] Enable the EMAC clock in at91_macb_hw_init().
Markus Hubig
- [U-Boot] [PATCH] Enable the EMAC clock in at91_macb_hw_init().
Andreas Bießmann
- [U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE
Lukasz Majewski
- [U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE
David du Colombier
- [U-Boot] [PATCH] eth_write_hwaddr: Return error for invalid MACs
Benoît Thébaudeau
- [U-Boot] [PATCH] eth_write_hwaddr: Return error for invalid MACs
Mike Frysinger
- [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2
Tom Rini
- [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2
Wolfgang Denk
- [U-Boot] [PATCH] fix IDE_BUS(dev) macro
Wolfgang Denk
- [U-Boot] [PATCH] fix IDE_BUS(dev) macro
Albert ARIBAUD
- [U-Boot] [PATCH] fix IDE_BUS(dev) macro
Albert ARIBAUD
- [U-Boot] [PATCH] fix IDE_BUS(dev) macro
DrEagle
- [U-Boot] [PATCH] Fix mx31_decode_pll
Benoît Thébaudeau
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Benoît Thébaudeau
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Stefano Babic
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Benoît Thébaudeau
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Stefano Babic
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Benoît Thébaudeau
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
stefano babic
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Stefano Babic
- [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init
Benoît Thébaudeau
- [U-Boot] [PATCH] fsl_pci: use 'Header Type' field to judge PCIE mode
Minghuan Lian
- [U-Boot] [PATCH] hawkboard: Update config file to work with common spl framework
Sughosh Ganu
- [U-Boot] [PATCH] hawkboard: Update config file to work with common spl framework
Tom Rini
- [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
Kumar Gala
- [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
York Sun
- [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
York Sun
- [U-Boot] [PATCH] image/FIT: Add ramdisk load, entry address and OS tag inclusion
jagan
- [U-Boot] [PATCH] implement software SPI
Piotr Wilczek
- [U-Boot] [PATCH] input: key_matrix: fix header inclusion
Stephan Linz
- [U-Boot] [PATCH] input: key_matrix: fix header inclusion
Simon Glass
- [U-Boot] [PATCH] input: key_matrix: fix header inclusion
Michal Simek
- [U-Boot] [PATCH] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH] KARO TX25: Fix NAND Flash R/W cycle times
Benoît Thébaudeau
- [U-Boot] [PATCH] KARO TX25: Fix NAND Flash R/W cycle times
Stefano Babic
- [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters
Valentin Longchamp
- [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters
Prafulla Wadaskar
- [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters
Valentin Longchamp
- [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters
Prafulla Wadaskar
- [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names
Prafulla Wadaskar
- [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names
Holger Brunck
- [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names
Valentin Longchamp
- [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names
Holger Brunck
- [U-Boot] [PATCH] kw_spi: fix clock prescaler computation
Valentin Longchamp
- [U-Boot] [PATCH] kw_spi: fix clock prescaler computation
Prafulla Wadaskar
- [U-Boot] [PATCH] kw_spi: fix clock prescaler computation
Valentin Longchamp
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] lsxl: support power switch
Prafulla Wadaskar
- [U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts
Marek Vasut
- [U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts
Stefano Babic
- [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards
Holger Brunck
- [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards
Heiko Schocher
- [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards
Wolfgang Denk
- [U-Boot] [PATCH] MAINTAINERS: fix Andreas Bießmann AVR32 entry
Andreas Bießmann
- [U-Boot] [PATCH] MAINTAINERS: fix Andreas Bießmann AVR32 entry
Andreas Bießmann
- [U-Boot] [PATCH] MAINTAINERS: fix entry of Ilko Iliev
Andreas Bießmann
- [U-Boot] [PATCH] MAINTAINERS: fix entry of Ilko Iliev
Andreas Bießmann
- [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory
Andy Fleming
- [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory
Tom Rini
- [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: fix ARM board lists
Allen Martin
- [U-Boot] [PATCH] MAKEALL: fix ARM board lists
Tom Rini
- [U-Boot] [PATCH] MAKEALL: fix ARM board lists
Allen Martin
- [U-Boot] [PATCH] MAKEALL: fix ARM board lists
Allen Martin
- [U-Boot] [PATCH] MAKEALL: update to work with new boards.cfg syntax
Allen Martin
- [U-Boot] [PATCH] Makefile: fix HAVE_VENDOR_COMMON_LIB
Scott Wood
- [U-Boot] [PATCH] Malloc: Fix -Wundef warnings
Wolfgang Denk
- [U-Boot] [PATCH] md5: Export step-by-step API
Benoît Thébaudeau
- [U-Boot] [PATCH] md5: Export step-by-step API
Benoît Thébaudeau
- [U-Boot] [PATCH] microblaze: Call spi_init function
Michal Simek
- [U-Boot] [PATCH] microblaze: Call spi_init function
Stephan Linz
- [U-Boot] [PATCH] mkconfig: add support for SPL CPU
Wolfgang Denk
- [U-Boot] [PATCH] mkconfig: add support for SPL CPU
Allen Martin
- [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc
Allen Martin
- [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc
Mike Frysinger
- [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc
Albert ARIBAUD
- [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc
Allen Martin
- [U-Boot] [PATCH] mmc_get_dev: Return error if mmc_init fails
Benoît Thébaudeau
- [U-Boot] [PATCH] mmcinfo: Fix help message
Benoît Thébaudeau
- [U-Boot] [PATCH] mpc85xx: use LCRR_DBYP define instead of raw constant
Paul Gortmaker
- [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
Holger Brunck
- [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
Holger Brunck
- [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
Stefan Roese
- [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Marek Vasut
- [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Marek Vasut
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Mike Frysinger
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Mike Frysinger
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Mike Frysinger
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Albert ARIBAUD
- [U-Boot] [PATCH] mtest: Print dcache state
Benoît Thébaudeau
- [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end
Matej Frančeškin
- [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end
Marek Vasut
- [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end
Matej Frančeškin
- [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end
Marek Vasut
- [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end
Tom Rini
- [U-Boot] [PATCH] mx25: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH] mx25: Clean up lowlevel_init
Matthias Weißer
- [U-Boot] [PATCH] mx25: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH] mx25: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH] mx25: Enable dcache
Benoît Thébaudeau
- [U-Boot] [PATCH] mx25: Enable dcache
Stefano Babic
- [U-Boot] [PATCH] mx25: Enable dcache
Stefano Babic
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Marek Vasut
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Marek Vasut
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Detlev Zundel
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Stefano Babic
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Marek Vasut
- [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Stefano Babic
- [U-Boot] [PATCH] MX28: Move the u-boot.bd info CPUDIR/SOCDIR
Marek Vasut
- [U-Boot] [PATCH] MX28: Move the u-boot.bd info CPUDIR/SOCDIR
Stefano Babic
- [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock
Marek Vasut
- [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock
Otavio Salvador
- [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock
Otavio Salvador
- [U-Boot] [PATCH] MX28: SPI: Fix CTRL0 not being written at end of DMA transfer
Marek Vasut
- [U-Boot] [PATCH] MX28: SPI: Limit the DMA transfer length
Marek Vasut
- [U-Boot] [PATCH] MX28: SPI: Limit the DMA transfer length
Marek Vasut
- [U-Boot] [PATCH] mx28evk: Add USB Ethernet support
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: Add USB Ethernet support
Marek Vasut
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Marek Vasut
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Marek Vasut
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Otavio Salvador
- [U-Boot] [PATCH] mx28evk: Turn on caches
Stefano Babic
- [U-Boot] [PATCH] mx31: Add more CCM access macros
Benoît Thébaudeau
- [U-Boot] [PATCH] mx31: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH] mx31: Fix PDR0_CSI_PODF
Benoît Thébaudeau
- [U-Boot] [PATCH] mx31: Fix PDR0_CSI_PODF
Benoît Thébaudeau
- [U-Boot] [PATCH] mx35 timer: Switch to 32-kHz source
Benoît Thébaudeau
- [U-Boot] [PATCH] mx35 timer: Switch to 32-kHz source
Stefano Babic
- [U-Boot] [PATCH] mx35: Fix typo on EDIO
Benoît Thébaudeau
- [U-Boot] [PATCH] mx35: Fix typo on EDIO
Stefano Babic
- [U-Boot] [PATCH] mx35: Fix typo on EDIO
Stefano Babic
- [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN
Benoît Thébaudeau
- [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN
Stefano Babic
- [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN
Stefano Babic
- [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION
Stefano Babic
- [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION
Stefano Babic
- [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value
Stefano Babic
- [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value
Stefano Babic
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Stefano Babic
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Stefano Babic
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32
Stefano Babic
- [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value
Stefano Babic
- [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value
Benoît Thébaudeau
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Stefano Babic
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Stefano Babic
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Stefano Babic
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Matt Sealey
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
stefano babic
- [U-Boot] [PATCH] mx5: add iomux-mx51.h include
Shawn Guo
- [U-Boot] [PATCH] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR
Stefano Babic
- [U-Boot] [PATCH] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR
Matt Sealey
- [U-Boot] [PATCH] mx5: Enable dcache
Benoît Thébaudeau
- [U-Boot] [PATCH] mx5: Enable dcache
Stefano Babic
- [U-Boot] [PATCH] mx5: Enable dcache
Stefano Babic
- [U-Boot] [PATCH] MX5: mx53loco: do not overwrite the console
Stefano Babic
- [U-Boot] [PATCH] MX5: mx53loco: do not overwrite the console
Fabio Estevam
- [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
Ashok
- [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Liu Hui-R64343
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Wolfgang Denk
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Thomas Petazzoni
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Thomas Petazzoni
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Fabio Estevam
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
Stefano Babic
- [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
Ashok
- [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
Fabio Estevam
- [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH] mx6qsabrelite: enable DCache and MMC bounce buffer
Dirk Behme
- [U-Boot] [PATCH] mx6qsabrelite: enable DCache and MMC bounce buffer
Stefano Babic
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Matt Sealey
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Marek Vasut
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
stefano babic
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Fabio Estevam
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Marek Vasut
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Benoît Thébaudeau
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
stefano babic
- [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX
Stefano Babic
- [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR
Benoît Thébaudeau
- [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR
Stefano Babic
- [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR
Stefano Babic
- [U-Boot] [PATCH] mxc_spi: Round up clock divider
Benoît Thébaudeau
- [U-Boot] [PATCH] mxc_spi: Round up clock divider
Stefano Babic
- [U-Boot] [PATCH] mxc_spi: Round up clock divider
Benoît Thébaudeau
- [U-Boot] [PATCH] mxc_spi: Round up clock divider
Stefano Babic
- [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'
Marek Vasut
- [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'
Stefano Babic
- [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'
Stefano Babic
- [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'
Fabio Estevam
- [U-Boot] [PATCH] net/phy: support the mv88e6352 switch
Valentin Longchamp
- [U-Boot] [PATCH] net/phy: support the mv88e6352 switch
Prafulla Wadaskar
- [U-Boot] [PATCH] net: asix: add support for AX88772B
Lucas Stach
- [U-Boot] [PATCH] net: asix: add support for AX88772B
Marek Vasut
- [U-Boot] [PATCH] net: asix: add support for AX88772B
Lucas Stach
- [U-Boot] [PATCH] net: asix: add support for AX88772B
Marek Vasut
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Mike Frysinger
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Joe Hershberger
- [U-Boot] [PATCH] net: sh_eth: Add support R8A7740 of rmobile (arm core)
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net:macb: add line break
Andreas Bießmann
- [U-Boot] [PATCH] OMAP3: add definition of CTRL_WKUP_CTRL register
Arnout Vandecappelle (Essensium/Mind)
- [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.
Enric Balletbo i Serra
- [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.
Javier Martinez Canillas
- [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.
Tom Rini
- [U-Boot] [PATCH] omap4 i2c: add support for i2c bus 4
Koen Kooi
- [U-Boot] [PATCH] omap4 i2c: add support for i2c bus 4
R, Sricharan
- [U-Boot] [PATCH] openrisc: Work around potential relocation issues
Wolfgang Denk
- [U-Boot] [PATCH] Origen: Add default clock settings for multimedia IPs
Tushar Behera
- [U-Boot] [PATCH] Output strings from echo with puts where easy
Joe Hershberger
- [U-Boot] [PATCH] Output strings from echo with puts where easy
Mike Frysinger
- [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers
Benoît Thébaudeau
- [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers
Benoît Thébaudeau
- [U-Boot] [PATCH] patman: Allow for changelog use in first version of a series
Simon Glass
- [U-Boot] [PATCH] patman: Allow for changelog use in first version of a series
Otavio Salvador
- [U-Boot] [PATCH] patman: Do not Cc addresses included in To list
Otavio Salvador
- [U-Boot] [PATCH] patman: Do not Cc addresses included in To list
Simon Glass
- [U-Boot] [PATCH] patman: Do not Cc addresses included in To list
Otavio Salvador
- [U-Boot] [PATCH] patman: Do not Cc addresses included in To list
Simon Glass
- [U-Boot] [PATCH] patman: Do not Cc addresses included in To list
Otavio Salvador
- [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R
Michal Simek
- [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R
Michal Simek
- [U-Boot] [PATCH] powerpc/85xx: improve definition of BR_PHYS_ADDR macro
Andy Fleming
- [U-Boot] [PATCH] powerpc/85xx: remove support for the Freescale P3060
Andy Fleming
- [U-Boot] [PATCH] powerpc/corenet: fix compile error when CONFIG_SYS_NO_FLASH is defined
Andy Fleming
- [U-Boot] [PATCH] powerpc/ddr: fix fsl_ddr_get_dimm_params compile error
Andy Fleming
- [U-Boot] [PATCH] powerpc/mpc85xx: Add B4860 SoC
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: Add IFC LAW target ID for FSL High-End SoC
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional
Andy Fleming
- [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional
Andy Fleming
- [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx:Add new ext fields to Freescale's IFC
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Enable debugger support to missed e500v2 SoC
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h
York Sun
- [U-Boot] [PATCH] powerpc/mpc8xxx: Remove P1015 and P1016 from CPU list
York Sun
- [U-Boot] [PATCH] powerpc/p1022ds: fix DIU/LBC switching with NAND enabled
Andy Fleming
- [U-Boot] [PATCH] powerpc/p1_p2_rdb_pc: print -PC suffix in board name
Scott Wood
- [U-Boot] [PATCH] powerpc/p2041: configure the CPLD lane_mux according to RCW
Andy Fleming
- [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode
Andy Fleming
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Wolfgang Denk
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Andy Fleming
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Scott Wood
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Andy Fleming
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Scott Wood
- [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
Scott Wood
- [U-Boot] [PATCH] powerpc:Fix return type & parameter passed for I/O functions
Wolfgang Denk
- [U-Boot] [PATCH] PPC temac phy probe unsigned int underflow fix.
hpeyerl
- [U-Boot] [PATCH] ppc4xx: Canyonlands/Glacier: Squeeze NAND image a bit to fit again
Stefan Roese
- [U-Boot] [PATCH] PXA: Fix up the timer
Marek Vasut
- [U-Boot] [PATCH] README: Add handy kermit primer
Karl O. Pinc
- [U-Boot] [PATCH] README: Add handy kermit primer
Wolfgang Denk
- [U-Boot] [PATCH] README: Cleanup description of supported partitions.
Karl O. Pinc
- [U-Boot] [PATCH] README: Update ver env var description
Benoît Thébaudeau
- [U-Boot] [PATCH] README: Update ver env var description
Mike Frysinger
- [U-Boot] [PATCH] rename EB+MCF-EV123 to its current marketing name EB+CPU5282
Wolfgang Denk
- [U-Boot] [PATCH] rtc: add support of mx27 rtc
Philippe Reynes
- [U-Boot] [PATCH] rtc: add support of mx27 rtc
stefano babic
- [U-Boot] [PATCH] rtc: add support of mx27 rtc
Stefano Babic
- [U-Boot] [PATCH] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] [PATCH] rtc: imxdi: Initial support
Stefano Babic
- [U-Boot] [PATCH] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux
Benoît Thébaudeau
- [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux
Benoît Thébaudeau
- [U-Boot] [PATCH] Save/restore global data pointer on API boundary
Wolfgang Denk
- [U-Boot] [PATCH] Save/restore global data pointer on API boundary
Leif Lindholm
- [U-Boot] [PATCH] Save/restore global data pointer on API boundary
Leif Lindholm
- [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code
Stefano Babic
- [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code
Marek Vasut
- [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code
Stefano Babic
- [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code
Otavio Salvador
- [U-Boot] [PATCH] SCSPS1: Enable caches
Marek Vasut
- [U-Boot] [PATCH] serial: CONSOLE macro is not used
Michal Simek
- [U-Boot] [PATCH] serial: CONSOLE macro is not used
Mike Frysinger
- [U-Boot] [PATCH] serial: CONSOLE macro is not used
Anatolij Gustschin
- [U-Boot] [PATCH] serial: sh: Add support Renesas R8A7740
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] SF: Add Spansion S25FL064P IDs
Marek Vasut
- [U-Boot] [PATCH] sf: spansion: Add support for S25FL256S
Michal Simek
- [U-Boot] [PATCH] sf: spansion: Add support for S25FL256S
Mike Frysinger
- [U-Boot] [PATCH] sf: stmicro: Add support for N25Q128A
Michal Simek
- [U-Boot] [PATCH] sf: stmicro: Add support for N25Q128A
Mike Frysinger
- [U-Boot] [PATCH] sf: winbond: fix page_size
Stephen Warren
- [U-Boot] [PATCH] sf: winbond: fix page_size
Mike Frysinger
- [U-Boot] [PATCH] snowball: Adding architecture dependent initialisation
mathieu.poirier at linaro.org
- [U-Boot] [PATCH] snowball: Adding architecture dependent initialisation
Tom Rini
- [U-Boot] [PATCH] spi: Fix merge conflicts - Makefile
Michal Simek
- [U-Boot] [PATCH] spi: Fix merge conflicts - Makefile
Wolfgang Denk
- [U-Boot] [PATCH] SPI: Remove superfluous semicolon
Marek Vasut
- [U-Boot] [PATCH] SPI: Remove superfluous semicolon
Mike Frysinger
- [U-Boot] [PATCH] SPI: Remove superfluous semicolon
Wolfgang Denk
- [U-Boot] [PATCH] spi: xilinx: Remove unused variable
Stephan Linz
- [U-Boot] [PATCH] SPL: do not use fix value for u-boot size
Stefano Babic
- [U-Boot] [PATCH] SPL: do not use fix value for u-boot size
Stefan Roese
- [U-Boot] [PATCH] SPL: do not use fix value for u-boot size
Stefano Babic
- [U-Boot] [PATCH] SPL: do not use fix value for u-boot size
Stefan Roese
- [U-Boot] [PATCH] SPL: do not use fix value for u-boot size
Stefano Babic
- [U-Boot] [PATCH] SPL: Enable use of custom defined U-Boot entry point
Stefan Roese
- [U-Boot] [PATCH] SPL: Enable use of custom defined U-Boot entry point
Tom Rini
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tyler Olmstead
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tom Rini
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tyler Olmstead
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tom Rini
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tom Rini
- [U-Boot] [PATCH] spl: remove forced linking of commands into SPL
Tyler Olmstead
- [U-Boot] [PATCH] Take over the maintainer for sam9g10 and sam9m10g45
Andreas Bießmann
- [U-Boot] [PATCH] Take over the maintainer for sam9g10 and sam9m10g45
Bo Shen
- [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()
Wolfgang Denk
- [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()
Tom Rini
- [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()
Allen Martin
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Lucas Stach
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Stephen Warren
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Lucas Stach
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Allen Martin
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Lucas Stach
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Wolfgang Denk
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Allen Martin
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Allen Martin
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Lucas Stach
- [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC
Allen Martin
- [U-Boot] [PATCH] tegra20: rework UART GPIO handling
Lucas Stach
- [U-Boot] [PATCH] tegra20: rework UART GPIO handling
Stephen Warren
- [U-Boot] [PATCH] tegra20: rework UART GPIO handling
Simon Glass
- [U-Boot] [PATCH] tegra20: usb: rework set_host_mode
Lucas Stach
- [U-Boot] [PATCH] tegra20: usb: rework set_host_mode
Stephen Warren
- [U-Boot] [PATCH] tegra20: usb: rework set_host_mode
Lucas Stach
- [U-Boot] [PATCH] tegra20: usb: rework set_host_mode
Stephen Warren
- [U-Boot] [PATCH] tegra: enable NAND on Harmony
Scott Wood
- [U-Boot] [PATCH] tegra: enable NAND on Harmony
Stephen Warren
- [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file
Anatolij Gustschin
- [U-Boot] [PATCH] u-boot yaffs2: Fix compilation warnings
Charles Manning
- [U-Boot] [PATCH] u-boot: Update yaffs2 file system
Wolfgang Denk
- [U-Boot] [PATCH] u-boot: Update yaffs2 file system
Wolfgang Denk
- [U-Boot] [PATCH] u-boot: Update yaffs2 file system
Wolfgang Denk
- [U-Boot] [PATCH] ubifs: Fix memory leak in ubifs_finddir
Stefan Roese
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Wolfgang Denk
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Lucas Stach
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Albert ARIBAUD
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Lucas Stach
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: don't print debug output
Lucas Stach
- [U-Boot] [PATCH] usb: ehci: don't print debug output
Marek Vasut
- [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype
Lucas Stach
- [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype
Marek Vasut
- [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype
Igor Grinberg
- [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype
Marek Vasut
- [U-Boot] [PATCH] usb: remove unnecessary packed attributes
Lucas Stach
- [U-Boot] [PATCH] usb: remove unnecessary packed attributes
Marek Vasut
- [U-Boot] [PATCH] usb: remove unnecessary packed attributes
Marek Vasut
- [U-Boot] [PATCH] usb: remove unnecessary packed attributes
Lucas Stach
- [U-Boot] [PATCH] usb: remove unnecessary packed attributes
Marek Vasut
- [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build
Charles Manning
- [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build
Marek Vasut
- [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build
Marek Vasut
- [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.
Andy Fleming
- [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.
Xie Shaohui-B21989
- [U-Boot] [PATCH][v4] powerpc/CoreNet: add tool to support pbl image build.
Shaohui Xie
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
dinguyen at altera.com
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Stefan Roese
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Stefan Roese
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Stefan Roese
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Dinh Nguyen
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv2 0/5] net: ASIX AX88772B enablement
Lucas Stach
- [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Kumar Gala
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Andy Fleming
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Andy Fleming
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 1/5] net: introduce transparent driver private in ueth_data
Lucas Stach
- [U-Boot] [PATCHv2 2/2] powerpc: Stack Pointer not properly aligned
Joakim Tjernlund
- [U-Boot] [PATCHv2 2/5] net: asix: split out basic reset function
Lucas Stach
- [U-Boot] [PATCHv2 3/5] net: asix: add write_hwaddr function
Lucas Stach
- [U-Boot] [PATCHv2 3/5] net: asix: add write_hwaddr function
Joe Hershberger
- [U-Boot] [PATCHv2 4/5] net: asix: add read_mac function
Lucas Stach
- [U-Boot] [PATCHv2 5/5] net: asix: add AX88772B support
Lucas Stach
- [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
- [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCHv3] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [Pull request] u-boot-onenand
Lukasz Majewski
- [U-Boot] [Pull request] u-boot-onenand
Wolfgang Denk
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Benoît Thébaudeau
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Joe Hershberger
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Mike Frysinger
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Benoît Thébaudeau
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Fabio Estevam
- [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr
Rob Herring
- [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code
Stefano Babic
- [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code
Marek Vasut
- [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code
Stathis Voukelatos
- [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320
Jamie Lentin
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Marek Vasut
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Wolfgang Denk
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH 1/5] linux/usb/ch9.h: update with the version from Linux tree
Ilya Yanok
- [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Marek Vasut
- [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
- [U-Boot] [RFC PATCH 2/5] musb-new: port of Linux musb gadget driver
Ilya Yanok
- [U-Boot] [RFC PATCH 3/5] musb-new: dsps backend driver
Ilya Yanok
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Marek Vasut
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Marek Vasut
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Stefano Babic
- [U-Boot] [RFC PATCH 4/5] am33xx: init OTG hardware and new musb gadget driver
Ilya Yanok
- [U-Boot] [RFC PATCH 4/5] mxs: Reowork SPL to use 'mxs' prefix for methods
Otavio Salvador
- [U-Boot] [RFC PATCH 5/5] am335x_evm: enable musb gadget on port 0
Ilya Yanok
- [U-Boot] [RFC] atmel:dataflash: remove unused mmc_mux
Andreas Bießmann
- [U-Boot] [SOLVED] Strange / Unreadable console output
Markus Hubig
- [U-Boot] [SOLVED] Strange / Unreadable console output
Andreas Bießmann
- [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support
Tom Rini
- [U-Boot] [U-Boot-DM] dwc_ahsata vs ahci
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Tom Rini
- [U-Boot] [U-Boot-DM] [PATCH 2/3] dm: mips: Fix lb60 timer code
Daniel Schwierzeck
- [U-Boot] [U-Boot-DM] [PATCH 3/3] dm: mips: Fix warnings in lb60 board
Daniel Schwierzeck
- [U-Boot] [U-Boot-DM] [PATCH 3/3] dm: mips: Fix warnings in lb60 board
Xiangfu Liu
- [U-Boot] [U-Boot-DM] List of offending drivers
Andreas Bießmann
- [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()
Kim Phillips
- [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()
Timur Tabi
- [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()
Kim Phillips
- [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()
Timur Tabi
- [U-Boot] [U-BOOT]: Add support for numonyx spi flash.
Mike Frysinger
- [U-Boot] [V2] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [V2] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
Zhong Hongbo
- [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash
Scott Wood
- [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash
Zhong Hongbo
- [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash
Scott Wood
- [U-Boot] [V3 09/15] arm1176: Fixed No relocation.
Zhong Hongbo
- [U-Boot] A question on UFS support
Shashidhar Hiremath
- [U-Boot] Add a new protocol
EVS Hardware Dpt
- [U-Boot] Add a new protocol
Albert ARIBAUD
- [U-Boot] Add a new protocol
EVS Hardware Dpt
- [U-Boot] Add a new protocol
Albert ARIBAUD
- [U-Boot] Add a new protocol
EVS Hardware Dpt
- [U-Boot] add more function in hello_world.c for standalone application
Kassey Lee
- [U-Boot] add more function in hello_world.c for standalone application
Wolfgang Denk
- [U-Boot] am33xx evm: Update secure_emif_sdram_config during ddr init
Satyanarayana, Sandhya
- [U-Boot] am33xx evm: Update secure_emif_sdram_config during ddr init
Tom Rini
- [U-Boot] arm: omap: Fix switching back to nandecc sw.
Jeroen Hofstee
- [U-Boot] arm: omap: Fix switching back to nandecc sw.
Igor Grinberg
- [U-Boot] arm: omap: Fix switching back to nandecc sw.
Nikita Kiryanov
- [U-Boot] Atheros AR7141 MIPS support
Drassal, Allan
- [U-Boot] Blackfin BF547 board testing.
Dimitar Penev
- [U-Boot] Blackfin BF547 board testing.
Mike Frysinger
- [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux
Dimitar Penev
- [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux
Mike Frysinger
- [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux
Dimitar Penev
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Tyler Olmstead
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Daniel Schwierzeck
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Tom Rini
- [U-Boot] CAN support?
lists2k12 at pflutsch.ch
- [U-Boot] cfi: Problem with Intel Strata 28F320 flash
Stefan Roese
- [U-Boot] Change console output from DUART to APPUART
mad mad
- [U-Boot] Change console output from DUART to APPUART
Albert ARIBAUD
- [U-Boot] Change console output from DUART to APPUART
Fabio Estevam
- [U-Boot] Changes for u-boot-ti/master
Tom Rini
- [U-Boot] Commit 8b5a02640adf77301f943e8754992c50df004e8a breaks about 20 ARM builds
Albert ARIBAUD (U-Boot)
- [U-Boot] Commit 8b5a02640adf77301f943e8754992c50df004e8a breaks about 20 ARM builds
Daniel Schwierzeck
- [U-Boot] Configure U-boot to output to LCD on imx28evk board
Bill
- [U-Boot] Configure U-boot to output to LCD on imx28evk board
Fabio Estevam
- [U-Boot] Configure U-boot to output to LCD on imx28evk board
Bill
- [U-Boot] Configure U-boot to output to LCD on imx28evk board
Fabio Estevam
- [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] CREDITS for some old code
Jeremy Andrus
- [U-Boot] CREDITS for some old code
Wolfgang Denk
- [U-Boot] CREDITS for some old code
Stefan Roese
- [U-Boot] dreamplug spi partitions
Ian Campbell
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Wolfgang Denk
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Tomas Hlavacek
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Albert ARIBAUD
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Tomas Hlavacek
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Marek Vasut
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] Early malloc() summary
Tomas Hlavacek
- [U-Boot] Early malloc() summary
Graeme Russ
- [U-Boot] early_malloc outline
Graeme Russ
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] early_malloc outline
Wolfgang Denk
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] early_malloc outline
Wolfgang Denk
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] early_malloc outline
Wolfgang Denk
- [U-Boot] early_malloc outline
Graeme Russ
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] early_malloc outline
Graeme Russ
- [U-Boot] early_malloc outline
Wolfgang Denk
- [U-Boot] Ethernet-USB adapter
Daniel Ścisłowski
- [U-Boot] Fail to compile a DEBUG version of u-boot.bin for Freescale MPC8536DS
Yuming Chen
- [U-Boot] Fcall to lib_ppc/board.c/trap_init() results in Machine Check Exception
Vic
- [U-Boot] Fwd: Re: [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Graeme Russ
- [U-Boot] gcc, ARM, -fdata-sections -fmerge-constants and strings
Tom Rini
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Lukasz Majewski
- [U-Boot] Help : Keyboard Enabling at U-boot
Simon Glass
- [U-Boot] How to read content of eeprom from uboot
Fierce
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Michael Hornung
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Stefano Babic
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Michael Hornung
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Stefano Babic
- [U-Boot] Intermediate ARM status
Albert ARIBAUD
- [U-Boot] Intermediate ARM status
Albert ARIBAUD
- [U-Boot] Intermediate ARM status
Marek Vasut
- [U-Boot] Is there file size limiation of tftp
J.Hwan Kim
- [U-Boot] Is there file size limiation of tftp
Mike Frysinger
- [U-Boot] Is there file size limiation of tftp
Jerry Van Baren
- [U-Boot] Is there file size limiation of tftp
Wolfgang Denk
- [U-Boot] kernel upgradation 2.6.23 to 2.6.35.13 with old U-boot 1.3.0 version
rajeshvangari vangari
- [U-Boot] kernel upgradation 2.6.23 to 2.6.35.13 with old U-boot 1.3.0 version
Wolfgang Denk
- [U-Boot] Keyboard enable at u-boot for Beagleboard
LIVIN SUNNY
- [U-Boot] Keyboard enable at u-boot for Beagleboard
Tom Rini
- [U-Boot] ld: section overlaps previous sections
Luciano Moretti
- [U-Boot] ld: section overlaps previous sections
Tom Rini
- [U-Boot] Memtest end address
José Miguel Gonçalves
- [U-Boot] Merging the pogo_e02 and sheevaplug code
Karl O. Pinc
- [U-Boot] Merging the pogo_e02 and sheevaplug code
Prafulla Wadaskar
- [U-Boot] Merging the pogo_e02 and sheevaplug code
Karl O. Pinc
- [U-Boot] Merging the pogo_e02 and sheevaplug code
Prafulla Wadaskar
- [U-Boot] Merging the pogo_e02 and sheevaplug code
Karl O. Pinc
- [U-Boot] multiple definition of `reloc_dst'
Sabri Altunbas
- [U-Boot] MX23/MX28 USB loader
Marek Vasut
- [U-Boot] OMAP Reset fails when kernel governor 'ondemand' is active
Andreas Müller
- [U-Boot] patman doesn't send patches
Stefan Roese
- [U-Boot] patman doesn't send patches
Ilya Yanok
- [U-Boot] patman doesn't send patches
Simon Glass
- [U-Boot] patman feature request
Tom Rini
- [U-Boot] patman feature request
Otavio Salvador
- [U-Boot] patman feature request
Simon Glass
- [U-Boot] patman feature request
Otavio Salvador
- [U-Boot] patman patches
Ilya Yanok
- [U-Boot] patman patches
Stefano Babic
- [U-Boot] patman patches
Ilya Yanok
- [U-Boot] Performance of the ARM's PL310 L2 cache.
Lukasz Majewski
- [U-Boot] Performance of the ARM's PL310 L2 cache.
Tom Rini
- [U-Boot] Please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD (U-Boot)
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD (U-Boot)
- [U-Boot] please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] please pull u-boot-avr32/master
Albert ARIBAUD (U-Boot)
- [U-Boot] please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] please pull u-boot-avr32/master
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Wolfgang Denk
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD (U-Boot)
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD (U-Boot)
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Mathieu Poirier
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD (U-Boot)
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point
Wolfgang Denk
- [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point
Thirumalesha N
- [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point
Markus Hubig
- [U-Boot] Problem booting linux kernel due to garbled available machine support
Dallas Clement
- [U-Boot] Problem with PCIexpress switch
Miguel Ángel Álvarez
- [U-Boot] Problems with a P2020 board
Mark Marshall
- [U-Boot] Problems with a P2020 board
Joakim Tjernlund
- [U-Boot] Problems with a P2020 board
Stefan Roese
- [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found
Dev Ma
- [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found
Dev Ma
- [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found
Stefan Roese
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Allen Martin
- [U-Boot] pull request for u-boot-tegra/master
Allen Martin
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Allen Martin
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Mike Frysinger
- [U-Boot] Pull request v2 : u-boot-sh/master
Nobuhiro Iwamatsu
- [U-Boot] Pull request v2 : u-boot-sh/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-nds32
Macpaul Lin
- [U-Boot] Pull request: u-boot-nds32
Wolfgang Denk
- [U-Boot] Pull request: u-boot-sh/master
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-sh/master
Wolfgang Denk
- [U-Boot] Question about getting the length of u-boot binary.
shawn xy Bai
- [U-Boot] Question about getting the length of u-boot binary.
Karl O. Pinc
- [U-Boot] Redundant Env
Sridhar Addagada
- [U-Boot] Redundant Env
Sridhar Addagada
- [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board
Thirumalesha N
- [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board
Wolfgang Denk
- [U-Boot] Request pull: u-boot-sh
Nobuhiro Iwamatsu
- [U-Boot] ROM_SI_REV on MX5
Matt Sealey
- [U-Boot] ROM_SI_REV on MX5
Benoît Thébaudeau
- [U-Boot] ROM_SI_REV on MX5
Matt Sealey
- [U-Boot] ROM_SI_REV on MX5
Benoît Thébaudeau
- [U-Boot] Sandbox: auto exiting on pipe closure
Wolfgang Denk
- [U-Boot] Sandbox: auto exiting on pipe closure
Mike Frysinger
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Jorgen Lundman
- [U-Boot] Seeking ARM development platform suggestions
Jason Cooper
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Jason Cooper
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Jorgen Lundman
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Jorgen Lundman
- [U-Boot] Seeking ARM development platform suggestions
Andreas Bießmann
- [U-Boot] Seeking ARM development platform suggestions
Stefan Roese
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] Seeking ARM development platform suggestions
Karl O. Pinc
- [U-Boot] Seeking ARM development platform suggestions
Stefan Roese
- [U-Boot] Seeking ARM development platform suggestions
Graeme Russ
- [U-Boot] sh4 sti7109 for mb442 motherboards
Андрей Борисович
- [U-Boot] smc911x and CONFIG_NET_MULTI
Dimitar Penev
- [U-Boot] smc911x and CONFIG_NET_MULTI
Mike Frysinger
- [U-Boot] Specifying flash page sizes
Ellis Andrew
- [U-Boot] Strange / Unreadable console output
Jerry Van Baren
- [U-Boot] Strange / Unreadable console output
Markus Hubig
- [U-Boot] Strange / Unreadable console output
Jerry Van Baren
- [U-Boot] Strange / Unreadable console output
Andreas Bießmann
- [U-Boot] Strange / Unreadable console output
Markus Hubig
- [U-Boot] Strange / Unreadable console output
Markus Hubig
- [U-Boot] Strange / Unreadable console output
Andreas Bießmann
- [U-Boot] Strange / Unreadable console output
Markus Hubig
- [U-Boot] Strange / Unreadable console output
Andreas Bießmann
- [U-Boot] Strange / Unreadable console output
Andreas Bießmann
- [U-Boot] Support for USB Ethernet adapter
Marek Vasut
- [U-Boot] Support for USB Ethernet adapter
Daniel
- [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.
Wolfgang Denk
- [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.
Matt Sealey
- [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.
Rob Herring
- [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.
Michael Hope
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Andy Sharp
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Graeme Russ
- [U-Boot] The way the list manages patch submission
Wolfgang Denk
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Wolfgang Denk
- [U-Boot] The way the list manages patch submission
Wolfgang Denk
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Karl O. Pinc
- [U-Boot] The way the list manages patch submission
Wolfgang Denk
- [U-Boot] The way the list manages patch submission
Alexander Holler
- [U-Boot] trouble with mmc on origen
John Rigby
- [U-Boot] trouble with mmc on origen
Jaehoon Chung
- [U-Boot] U-Boot API Demo Problem
Priebe, Sebastian
- [U-Boot] U-Boot API Problem
Priebe, Sebastian
- [U-Boot] U-Boot Api Problem
Priebe, Sebastian
- [U-Boot] U-boot confused - flashing
Daniel Ścisłowski
- [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error
Bill
- [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error
Fabio Estevam
- [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error
Bill
- [U-Boot] u-boot preventing access to NAND chip on imx28evk board
Bill
- [U-Boot] u-boot preventing access to NAND chip on imx28evk board
Fabio Estevam
- [U-Boot] u-boot script question
Sridhar Addagada
- [U-Boot] u-boot script question
Wolfgang Denk
- [U-Boot] u-boot support for if - then - else scripting
Bud Miljkovic
- [U-Boot] u-boot support for if - then - else scripting
Wolfgang Denk
- [U-Boot] ubifsload does not support relative symbolic link
Dev Ma
- [U-Boot] uboot nor xip support
Amol Bhise
- [U-Boot] uboot nor xip support
Graeme Russ
- [U-Boot] uboot nor xip support
Amol Bhise
- [U-Boot] USB 3 (XHCI) support in U-BOOT
yehuda yitchak
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] usb_test_unit_ready called every block read - performance
Steve Heckman
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] usb_test_unit_ready called every block read - performance
Steve Heckman
- [U-Boot] usb_test_unit_ready called every block read - performance
Jim Shimer
- [U-Boot] usb_test_unit_ready called every block read - performance
Jim Shimer
- [U-Boot] usb_test_unit_ready called every block read - performance
Steve Heckman
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick
Bill
- [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick
Scott Wood
- [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick
Otavio Salvador
- [U-Boot] V4 S3C64XX: Switch all I/O to use readl/writel functio and Clear SMDK64XX
Zhong Hongbo
- [U-Boot] WARNING: Caches not enabled on openrd based board
Alex Zeffertt
- [U-Boot] WARNING: Caches not enabled on openrd based board
Lukasz Majewski
- [U-Boot] WARNING: Caches not enabled on openrd based board
Alex Zeffertt
- [U-Boot] WARNING: Caches not enabled on openrd based board
Stefan Herbrechtsmeier
- [U-Boot] WARNING: Caches not enabled on openrd based board
Prafulla Wadaskar
- [U-Boot] Where to find usable CROSS_COMPILE toolchain and the particular config?
JIA Pei
- [U-Boot] Where to find usable CROSS_COMPILE toolchain and the particular config?
Albert ARIBAUD
- [U-Boot] which file would contain SRAM address and FLASH address range
facing_it_all
- [U-Boot] Why no cache flushing in do_go_exec()
Charles Manning
- [U-Boot] Why no cache flushing in do_go_exec()
Mike Frysinger
- [U-Boot] Write ENV to File and flash it with openocd (problem) !!!
Franz Skale
- [U-Boot] Xilinx Zynq platform
Michal Simek
Last message date:
Fri Aug 31 23:37:48 CEST 2012
Archived on: Sun May 18 15:56:00 CEST 2014
This archive was generated by
Pipermail 0.09 (Mailman edition).