[U-Boot] [PATCH] davinci: enbw_cmc: change switch init behaviour

Tom Rini trini at ti.com
Sat Aug 25 01:38:53 CEST 2012


On Tue, Aug 14, 2012 at 11:51:04AM +0200, Heiko Schocher wrote:

> change the behaviour of switch initialization:
> 
> - rename "pwl" to "lan" in hwconfig parameter
>   "lan" = port 1 with phy addr 2
>   "lmn" = port 2 with phy addr 3
> 
> - if we have a valid switch config file in flash, do not
>   evaluate the settings in the hwconfig "lan" or "lmn"
>   subcommand.
> 
> - if we have no valid switch config file in flash, start
>   the switch with default values, if we have a "lan" or
>   a "lmn" hwconfig subcommand. If no "lan" or "lmn" is
>   found in hwconfig, do nothing with the switch.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>

Queued to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120824/903f145c/attachment.pgp>


More information about the U-Boot mailing list