[U-Boot] Please pull u-boot-staging/trini at ti.com

[Tom Rini]

On Sat, Aug 18, 2012 at 07:15:56AM -0700, Tom Rini wrote:
> On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> > Hi Tom,
> > 
> > On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini at ti.com> wrote:
> > 
> > > Hello,
> > > 
> > > This replaces my previous pull-request and is new warning free on
> > > MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> > > 
> > > The following changes since commit
> > > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> > > 
> > >   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.denx.de/u-boot-staging trini at ti.com
> > > 
> > > for you to fetch changes up to
> > > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> > > 
> > >   ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> > > 09:43:47 -0700)
> > > 
> > > ----------------------------------------------------------------
> > > John Rigby (1):
> > >       u8500: Separating mmc config parameters from driver
> > > 
> > > Mathieu J. Poirier (10):
> > >       snowball: Add support for ux500 based snowball board
> > >       u8500: Moving prcmu to cpu directory
> > >       snowball: Adding architecture dependent initialisation
> > >       snowball: Adding CPU clock initialisation
> > >       snowball: Moving to ux500.v2 addess scheme for PRCMU access
> > >       snowball: applying power to LAN and GBF controllers
> > >       u8500: Moving processor-specific functions to cpu area.
> > >       u8500: Enabling power to MMC device on AB8500 V2
> > >       armv7: Adding cpu specific cache managmenent
> > >       snowball: Adding board specific cache cleanup routine
> > > 
> > > Stephen Warren (4):
> > >       README: fix references to config_cmd_default.h
> > >       ARM: arm1176: enable instruction cache in arch_cpu_init()
> > >       ARM: add basic support for the Broadcom BCM2835 SoC
> > >       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > 
> > >  MAINTAINERS                                        |    8 +
> > >  README                                             |    4 +-
> > >  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
> > >  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
> > >  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
> > >  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
> > >  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
> > >  arch/arm/cpu/arm1176/cpu.c                         |    7 +
> > >  arch/arm/cpu/armv7/cpu.c                           |    8 +
> > >  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
> > >  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
> > >  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
> > >  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
> > >  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
> > >  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
> > >  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
> > >  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
> > >  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
> > >  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
> > >  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
> > >  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
> > >  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
> > >  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
> > >  board/raspberrypi/rpi_b/Makefile                   |   34 +
> > >  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
> > >  board/st-ericsson/snowball/Makefile                |   49 ++
> > >  board/st-ericsson/snowball/db8500_pins.h           |  745
> > > ++++++++++++++++++++
> > > board/st-ericsson/snowball/snowball.c              |  348 +++++++++
> > > board/st-ericsson/u8500/Makefile                   |    2 +-
> > > board/st-ericsson/u8500/u8500_href.c               |  100 +--
> > > boards.cfg                                         |    2 +
> > > drivers/gpio/Makefile                              |    2 +
> > > drivers/gpio/bcm2835_gpio.c                        |   89 +++
> > > drivers/gpio/db8500_gpio.c                         |  221 ++++++
> > > drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> > > drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> > > drivers/serial/serial_pl01x.c                      |    2 +
> > > include/configs/rpi_b.h                            |  104 +++
> > > include/configs/snowball.h                         |  266 +++++++ 39
> > > files changed, 2937 insertions(+), 213 deletions(-) create mode
> > > 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > > board/st-ericsson/u8500/prcmu-fw.h =>
> > > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > > board/raspberrypi/rpi_b/Makefile create mode 100644
> > > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > > board/st-ericsson/snowball/Makefile create mode 100644
> > > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > > board/st-ericsson/snowball/snowball.c create mode 100644
> > > drivers/gpio/bcm2835_gpio.c create mode 100644
> > > drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> > > create mode 100644 include/configs/snowball.h
> > 
> > Are you sure you want me to only pull the top 15 patches of
> > u-boot-staging/trini at ti.com, but not the tens of ones that that are
> > below it in u-boot-staging/master? These are nowhere else, especially
> > not in u-boot/master, so I am wondering why your your request takes
> > staging/master as its base.
> 
> I don't see any patches like that.  And I did a quick re-confirm of what
> is in trini at ti.com and that's what I want to replace the commits in
> u-boot-arm/master from before.

To be clear, u-boot-staging/trini at ti.com is based on a somewhat older,
but not top of tree u-boot/master than what u-boot-arm is based on
today.  I think your local u-boot/master is out of date.
http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
is what my branch is on top of.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120818/10ab2dcd/attachment.pgp>