[U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
trini at ti.com
Sat Aug 18 16:15:56 CEST 2012
On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini at ti.com> wrote:
>
> > Hello,
> >
> > This replaces my previous pull-request and is new warning free on
> > MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> >
> > The following changes since commit
> > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> >
> > zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-staging trini at ti.com
> >
> > for you to fetch changes up to
> > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> >
> > ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> > 09:43:47 -0700)
> >
> > ----------------------------------------------------------------
> > John Rigby (1):
> > u8500: Separating mmc config parameters from driver
> >
> > Mathieu J. Poirier (10):
> > snowball: Add support for ux500 based snowball board
> > u8500: Moving prcmu to cpu directory
> > snowball: Adding architecture dependent initialisation
> > snowball: Adding CPU clock initialisation
> > snowball: Moving to ux500.v2 addess scheme for PRCMU access
> > snowball: applying power to LAN and GBF controllers
> > u8500: Moving processor-specific functions to cpu area.
> > u8500: Enabling power to MMC device on AB8500 V2
> > armv7: Adding cpu specific cache managmenent
> > snowball: Adding board specific cache cleanup routine
> >
> > Stephen Warren (4):
> > README: fix references to config_cmd_default.h
> > ARM: arm1176: enable instruction cache in arch_cpu_init()
> > ARM: add basic support for the Broadcom BCM2835 SoC
> > ARM: add Raspberry Pi model B board, using BCM2835 SoC
> >
> > MAINTAINERS | 8 +
> > README | 4 +-
> > arch/arm/cpu/arm1176/bcm2835/Makefile | 37 +
> > arch/arm/cpu/arm1176/bcm2835/config.mk | 19 +
> > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 +
> > arch/arm/cpu/arm1176/bcm2835/reset.c | 35 +
> > arch/arm/cpu/arm1176/bcm2835/timer.c | 55 ++
> > arch/arm/cpu/arm1176/cpu.c | 7 +
> > arch/arm/cpu/armv7/cpu.c | 8 +
> > arch/arm/cpu/armv7/u8500/Makefile | 2 +-
> > arch/arm/cpu/armv7/u8500/clock.c | 34 +
> > arch/arm/cpu/armv7/u8500/cpu.c | 192 +++++
> > .../arm/cpu/armv7}/u8500/prcmu.c | 128 +++-
> > arch/arm/include/asm/arch-bcm2835/gpio.h | 66 ++
> > arch/arm/include/asm/arch-bcm2835/timer.h | 37 +
> > arch/arm/include/asm/arch-bcm2835/wdog.h | 36 +
> > arch/arm/include/asm/arch-u8500/clock.h | 5 +-
> > arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 ++
> > arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++++
> > arch/arm/include/asm/arch-u8500/hardware.h | 33 +-
> > .../arm/include/asm/arch-u8500/prcmu.h | 35 +-
> > arch/arm/include/asm/arch-u8500/sys_proto.h | 1 +
> > board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +-
> > board/raspberrypi/rpi_b/Makefile | 34 +
> > board/raspberrypi/rpi_b/rpi_b.c | 34 +
> > board/st-ericsson/snowball/Makefile | 49 ++
> > board/st-ericsson/snowball/db8500_pins.h | 745
> > ++++++++++++++++++++
> > board/st-ericsson/snowball/snowball.c | 348 +++++++++
> > board/st-ericsson/u8500/Makefile | 2 +-
> > board/st-ericsson/u8500/u8500_href.c | 100 +--
> > boards.cfg | 2 +
> > drivers/gpio/Makefile | 2 +
> > drivers/gpio/bcm2835_gpio.c | 89 +++
> > drivers/gpio/db8500_gpio.c | 221 ++++++
> > drivers/mmc/arm_pl180_mmci.c | 131 ++--
> > drivers/mmc/arm_pl180_mmci.h | 27 +-
> > drivers/serial/serial_pl01x.c | 2 +
> > include/configs/rpi_b.h | 104 +++
> > include/configs/snowball.h | 266 +++++++ 39
> > files changed, 2937 insertions(+), 213 deletions(-) create mode
> > 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > board/st-ericsson/u8500/prcmu-fw.h =>
> > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > board/raspberrypi/rpi_b/Makefile create mode 100644
> > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > board/st-ericsson/snowball/Makefile create mode 100644
> > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > board/st-ericsson/snowball/snowball.c create mode 100644
> > drivers/gpio/bcm2835_gpio.c create mode 100644
> > drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> > create mode 100644 include/configs/snowball.h
>
> Are you sure you want me to only pull the top 15 patches of
> u-boot-staging/trini at ti.com, but not the tens of ones that that are
> below it in u-boot-staging/master? These are nowhere else, especially
> not in u-boot/master, so I am wondering why your your request takes
> staging/master as its base.
I don't see any patches like that. And I did a quick re-confirm of what
is in trini at ti.com and that's what I want to replace the commits in
u-boot-arm/master from before.
--
Tom
More information about the U-Boot
mailing list