[U-Boot] Please pull u-boot-staging/trini at ti.com

Albert ARIBAUD albert.u.boot at aribaud.net
Sat Aug 18 08:28:55 CEST 2012


Hi Tom,

On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini at ti.com> wrote:

> Hello,
> 
> This replaces my previous pull-request and is new warning free on
> MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> 
> The following changes since commit
> 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> 
>   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-staging trini at ti.com
> 
> for you to fetch changes up to
> 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> 
>   ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> 09:43:47 -0700)
> 
> ----------------------------------------------------------------
> John Rigby (1):
>       u8500: Separating mmc config parameters from driver
> 
> Mathieu J. Poirier (10):
>       snowball: Add support for ux500 based snowball board
>       u8500: Moving prcmu to cpu directory
>       snowball: Adding architecture dependent initialisation
>       snowball: Adding CPU clock initialisation
>       snowball: Moving to ux500.v2 addess scheme for PRCMU access
>       snowball: applying power to LAN and GBF controllers
>       u8500: Moving processor-specific functions to cpu area.
>       u8500: Enabling power to MMC device on AB8500 V2
>       armv7: Adding cpu specific cache managmenent
>       snowball: Adding board specific cache cleanup routine
> 
> Stephen Warren (4):
>       README: fix references to config_cmd_default.h
>       ARM: arm1176: enable instruction cache in arch_cpu_init()
>       ARM: add basic support for the Broadcom BCM2835 SoC
>       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> 
>  MAINTAINERS                                        |    8 +
>  README                                             |    4 +-
>  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
>  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
>  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
>  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
>  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
>  arch/arm/cpu/arm1176/cpu.c                         |    7 +
>  arch/arm/cpu/armv7/cpu.c                           |    8 +
>  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
>  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
>  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
>  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
>  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
>  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
>  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
>  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
>  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
>  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
>  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
>  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
>  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
>  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
>  board/raspberrypi/rpi_b/Makefile                   |   34 +
>  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
>  board/st-ericsson/snowball/Makefile                |   49 ++
>  board/st-ericsson/snowball/db8500_pins.h           |  745
> ++++++++++++++++++++
> board/st-ericsson/snowball/snowball.c              |  348 +++++++++
> board/st-ericsson/u8500/Makefile                   |    2 +-
> board/st-ericsson/u8500/u8500_href.c               |  100 +--
> boards.cfg                                         |    2 +
> drivers/gpio/Makefile                              |    2 +
> drivers/gpio/bcm2835_gpio.c                        |   89 +++
> drivers/gpio/db8500_gpio.c                         |  221 ++++++
> drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> drivers/serial/serial_pl01x.c                      |    2 +
> include/configs/rpi_b.h                            |  104 +++
> include/configs/snowball.h                         |  266 +++++++ 39
> files changed, 2937 insertions(+), 213 deletions(-) create mode
> 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> board/st-ericsson/u8500/prcmu-fw.h =>
> arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> board/raspberrypi/rpi_b/Makefile create mode 100644
> board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> board/st-ericsson/snowball/Makefile create mode 100644
> board/st-ericsson/snowball/db8500_pins.h create mode 100644
> board/st-ericsson/snowball/snowball.c create mode 100644
> drivers/gpio/bcm2835_gpio.c create mode 100644
> drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> create mode 100644 include/configs/snowball.h
> 

Are you sure you want me to only pull the top 15 patches of
u-boot-staging/trini at ti.com, but not the tens of ones that that are
below it in u-boot-staging/master? These are nowhere else, especially
not in u-boot/master, so I am wondering why your your request takes
staging/master as its base.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list