[U-Boot] Please pull u-boot-staging/trini at ti.com

[Tom Rini]

Hello,

This replaces my previous pull-request and is new warning free on
MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

  zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to 5d26e4de33fab7b132e8a8036ac54176f537d79f:

  ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15 09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
      u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
      snowball: Add support for ux500 based snowball board
      u8500: Moving prcmu to cpu directory
      snowball: Adding architecture dependent initialisation
      snowball: Adding CPU clock initialisation
      snowball: Moving to ux500.v2 addess scheme for PRCMU access
      snowball: applying power to LAN and GBF controllers
      u8500: Moving processor-specific functions to cpu area.
      u8500: Enabling power to MMC device on AB8500 V2
      armv7: Adding cpu specific cache managmenent
      snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
      README: fix references to config_cmd_default.h
      ARM: arm1176: enable instruction cache in arch_cpu_init()
      ARM: add basic support for the Broadcom BCM2835 SoC
      ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745 ++++++++++++++++++++
 board/st-ericsson/snowball/snowball.c              |  348 +++++++++
 board/st-ericsson/u8500/Makefile                   |    2 +-
 board/st-ericsson/u8500/u8500_href.c               |  100 +--
 boards.cfg                                         |    2 +
 drivers/gpio/Makefile                              |    2 +
 drivers/gpio/bcm2835_gpio.c                        |   89 +++
 drivers/gpio/db8500_gpio.c                         |  221 ++++++
 drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
 drivers/mmc/arm_pl180_mmci.h                       |   27 +-
 drivers/serial/serial_pl01x.c                      |    2 +
 include/configs/rpi_b.h                            |  104 +++
 include/configs/snowball.h                         |  266 +++++++
 39 files changed, 2937 insertions(+), 213 deletions(-)
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c
 create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
 rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%)
 create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h
 rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%)
 create mode 100644 board/raspberrypi/rpi_b/Makefile
 create mode 100644 board/raspberrypi/rpi_b/rpi_b.c
 create mode 100644 board/st-ericsson/snowball/Makefile
 create mode 100644 board/st-ericsson/snowball/db8500_pins.h
 create mode 100644 board/st-ericsson/snowball/snowball.c
 create mode 100644 drivers/gpio/bcm2835_gpio.c
 create mode 100644 drivers/gpio/db8500_gpio.c
 create mode 100644 include/configs/rpi_b.h
 create mode 100644 include/configs/snowball.h

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120817/14d5a510/attachment.pgp>