[U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
Stefano Babic
sbabic at denx.de
Mon Aug 20 09:58:21 CEST 2012
On 15/08/2012 22:31, Troy Kisky wrote:
> This is useful for forcing the ROM's
> usb downloader to activate upon a watchdog reset.
> Or, you can boot from either SD Card.
>
> Currently, support added for MX53 and MX6Q
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
>
> Note: MX53 support untested.
>
> ---
> v4: replaced some occurrances of reset s/reset/boot/ or s/reset/b/
> renamed files
> only bmode command now, added noreset argument.
> add static keywords
> ---
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 +++++++++++++++++++++++++++
> arch/arm/cpu/armv7/mx5/soc.c | 31 +++++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 ++++++++
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 ++++
> arch/arm/include/asm/arch-mx6/imx-regs.h | 21 +++++
> arch/arm/include/asm/imx-common/boot_mode.h | 36 ++++++++
> 7 files changed, 262 insertions(+)
> create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
>
> diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile
> index bf36be5..16fba8d 100644
> --- a/arch/arm/cpu/armv7/imx-common/Makefile
> +++ b/arch/arm/cpu/armv7/imx-common/Makefile
> @@ -29,6 +29,7 @@ LIB = $(obj)libimx-common.o
>
> COBJS-y = iomux-v3.o timer.o cpu.o speed.o
> COBJS-$(CONFIG_I2C_MXC) += i2c.o
> +COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
> COBJS := $(sort $(COBJS-y))
>
> SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> diff --git a/arch/arm/cpu/armv7/imx-common/cmd_bmode.c b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> new file mode 100644
> index 0000000..02fe72e
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> @@ -0,0 +1,119 @@
> +/*
> + * Copyright (C) 2012 Boundary Devices Inc.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/imx-common/boot_mode.h>
> +#include <malloc.h>
> +
> +static const struct boot_mode *modes[2];
> +
> +static const struct boot_mode *search_modes(char *arg)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(modes); i++) {
> + const struct boot_mode *p = modes[i];
> + if (p) {
> + while (p->name) {
> + if (!strcmp(p->name, arg))
> + return p;
> + p++;
> + }
> + }
> + }
> + return NULL;
> +}
> +
> +static int create_usage(char *dest)
> +{
> + int i;
> + int size = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(modes); i++) {
> + const struct boot_mode *p = modes[i];
> + if (p) {
> + while (p->name) {
> + int len = strlen(p->name);
> + if (dest) {
> + memcpy(dest, p->name, len);
> + dest += len;
> + *dest++ = '|';
> + }
> + size += len + 1;
> + p++;
> + }
> + }
> + }
> + if (dest)
> + memcpy(dest - 1, " [noreset]", 11); /* include trailing 0 */
> + size += 10;
> + return size;
> +}
> +
> +static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + const struct boot_mode *p;
> + int reset_requested = 1;
> +
> + if (argc < 2)
> + return CMD_RET_USAGE;
> + p = search_modes(argv[1]);
> + if (!p)
> + return CMD_RET_USAGE;
> + if (argc == 3) {
> + if (strcmp(argv[2], "noreset"))
> + return CMD_RET_USAGE;
> + reset_requested = 0;
> + }
> +
> + boot_mode_apply(p->cfg_val);
> + if (reset_requested && p->cfg_val)
> + do_reset(NULL, 0, 0, NULL);
> + return 0;
> +}
> +
> +U_BOOT_CMD(
> + bmode, 3, 0, do_boot_mode,
> + NULL,
> + "");
> +
> +void add_board_boot_modes(const struct boot_mode *p)
> +{
> + int size;
> + char *dest;
> +
> + if (__u_boot_cmd_bmode.usage) {
> + free(__u_boot_cmd_bmode.usage);
> + __u_boot_cmd_bmode.usage = NULL;
> + }
> +
> + modes[0] = p;
> + modes[1] = soc_boot_modes;
> + size = create_usage(NULL);
> + dest = malloc(size);
> + if (dest) {
> + create_usage(dest);
> + __u_boot_cmd_bmode.usage = dest;
> + }
> +}
> diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
> index 3f5a4f7..d9ca88a 100644
> --- a/arch/arm/cpu/armv7/mx5/soc.c
> +++ b/arch/arm/cpu/armv7/mx5/soc.c
> @@ -30,6 +30,7 @@
>
> #include <asm/errno.h>
> #include <asm/io.h>
> +#include <asm/imx-common/boot_mode.h>
>
> #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
> #error "CPU_TYPE not defined"
> @@ -115,3 +116,33 @@ void set_chipselect_size(int const cs_size)
>
> writel(reg, &iomuxc_regs->gpr1);
> }
> +
> +#ifdef CONFIG_MX53
> +void boot_mode_apply(unsigned cfg_val)
> +{
> + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
> +}
> +/*
> + * cfg_val will be used for
> + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
> + *
> + * If bit 28 of LPGR is set upon watchdog reset,
> + * bits[25:0] of LPGR will move to SBMR.
> + */
> +const struct boot_mode soc_boot_modes[] = {
> + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
> + /* usb or serial download */
> + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
> + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
> + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
> + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
> + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
> + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
> + /* 4 bit bus width */
> + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
> + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
> + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
> + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
> + {NULL, 0},
> +};
> +#endif
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 84b458c..7380ffe 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -29,6 +29,7 @@
> #include <asm/arch/imx-regs.h>
> #include <asm/arch/clock.h>
> #include <asm/arch/sys_proto.h>
> +#include <asm/imx-common/boot_mode.h>
>
> u32 get_cpu_rev(void)
> {
> @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
>
> }
> #endif
> +
> +void boot_mode_apply(unsigned cfg_val)
> +{
> + unsigned reg;
> + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR;
> + writel(cfg_val, &psrc->gpr9);
> + reg = readl(&psrc->gpr10);
> + if (cfg_val)
> + reg |= 1 << 28;
> + else
> + reg &= ~(1 << 28);
> + writel(reg, &psrc->gpr10);
> +}
> +/*
> + * cfg_val will be used for
> + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
> + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
> + * to SBMR1, which will determine the boot device.
> + */
> +const struct boot_mode soc_boot_modes[] = {
> + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
> + /* reserved value should start rom usb */
> + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
> + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
> + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
> + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
> + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
> + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
> + /* 4 bit bus width */
> + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
> + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
> + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
> + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
> + {NULL, 0},
> +};
> diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
> index 7f66b61..c53465f 100644
> --- a/arch/arm/include/asm/arch-mx5/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
> @@ -459,6 +459,24 @@ struct src {
> u32 simr;
> };
>
> +struct srtc_regs {
> + u32 lpscmr; /* 0x00 */
> + u32 lpsclr; /* 0x04 */
> + u32 lpsar; /* 0x08 */
> + u32 lpsmcr; /* 0x0c */
> + u32 lpcr; /* 0x10 */
> + u32 lpsr; /* 0x14 */
> + u32 lppdr; /* 0x18 */
> + u32 lpgr; /* 0x1c */
> + u32 hpcmr; /* 0x20 */
> + u32 hpclr; /* 0x24 */
> + u32 hpamr; /* 0x28 */
> + u32 hpalr; /* 0x2c */
> + u32 hpcr; /* 0x30 */
> + u32 hpisr; /* 0x34 */
> + u32 hpienr; /* 0x38 */
> +};
> +
> /* CSPI registers */
> struct cspi_regs {
> u32 rxdata;
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 5d77603..dacb9ea 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -448,5 +448,26 @@ struct iomuxc_base_regs {
> u32 daisy[104]; /* 0x7b0..94c */
> };
>
> +struct src_regs {
> + u32 scr; /* 0x00 */
> + u32 sbmr1; /* 0x04 */
> + u32 srsr; /* 0x08 */
> + u32 reserved1; /* 0x0c */
> + u32 reserved2; /* 0x10 */
> + u32 sisr; /* 0x14 */
> + u32 simr; /* 0x18 */
> + u32 sbmr2; /* 0x1c */
> + u32 gpr1; /* 0x20 */
> + u32 gpr2; /* 0x24 */
> + u32 gpr3; /* 0x28 */
> + u32 gpr4; /* 0x2c */
> + u32 gpr5; /* 0x30 */
> + u32 gpr6; /* 0x34 */
> + u32 gpr7; /* 0x38 */
> + u32 gpr8; /* 0x3c */
> + u32 gpr9; /* 0x40 */
> + u32 gpr10; /* 0x44 */
> +};
> +
> #endif /* __ASSEMBLER__*/
> #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
> diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h
> new file mode 100644
> index 0000000..6d2df74
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/boot_mode.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (C) 2012 Boundary Devices Inc.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef _ASM_BOOT_MODE_H
> +#define _ASM_BOOT_MODE_H
> +#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \
> + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1)
> +
> +struct boot_mode {
> + const char *name;
> + unsigned cfg_val;
> +};
> +
> +void add_board_boot_modes(const struct boot_mode *p);
> +void boot_mode_apply(unsigned cfg_val);
> +extern const struct boot_mode soc_boot_modes[];
> +#endif
>
Applied (whole series) to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list