[U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value

[Benoît Thébaudeau]

Do not pretend to have initialized mmc successfully if CONFIG_FSL_ESDHC is not
defined. Instead, only implement a custom cpu_mmc_init() when it does something.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Cc: Stefano Babic <sbabic at denx.de>
---
Changes for v2:
 - Do not define cpu_mmc_init() if CONFIG_FSL_ESDHC is not defined.

 .../arch/arm/cpu/armv7/imx-common/cpu.c            |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
index b3195dd..7313fc0 100644
--- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c
+++ u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
@@ -111,18 +111,16 @@ int cpu_eth_init(bd_t *bis)
 	return rc;
 }
 
+#ifdef CONFIG_FSL_ESDHC
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
  */
 int cpu_mmc_init(bd_t *bis)
 {
-#ifdef CONFIG_FSL_ESDHC
 	return fsl_esdhc_mmc_init(bis);
-#else
-	return 0;
-#endif
 }
+#endif
 
 void reset_cpu(ulong addr)
 {