[U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Albert ARIBAUD (U-Boot)
albert.u.boot at aribaud.net
Tue Aug 14 01:06:55 CEST 2012
Hi Stefano,
On Fri, 10 Aug 2012 08:54:06 +0200, Stefano Babic <sbabic at denx.de>
wrote:
> Hi Albert,
>
> an update pull request, please pull from u-boot-imx, thanks.
>
> The following changes since commit
> 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
>
> DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> 42abce776222a5d5cb2b355e77539cabb705b04a:
>
> sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-10
> 08:48:24 +0200)
>
> ----------------------------------------------------------------
> Benoît Thébaudeau (1):
> rtc: imxdi: Initial support
>
> Fabio Estevam (3):
> mx28evk: Turn on caches
> mx51evk: do not overwrite the console
> vision2: do not overwrite the console
>
> Marek Vasut (9):
> MX28: SPI: Refactor spi_xfer a bit
> MX28: SPI: Pull out the PIO transfer function
> MX28: SPI: Add DMA transfer support
> MX28: Fix up the MMC driver DMA mode
> MX28: Split out the PIO and DMA transfer functions
> MX28: Transfer small blocks via PIO in MXS MMC
> MX28: Fix MXS MMC DMA issues
> MX28: Move the u-boot.bd info CPUDIR/SOCDIR
> MX28: Add SchulerControl SC_SPS_1 platform
>
> Otavio Salvador (10):
> imx: Use a clear identification of an unidentified CPU type
> MX28: extend print_cpuinfo() to use chip information
> MX28: use a clear name for DDR2 initialization
> mxs: reorganize source directory for easy sharing of code in
> i.MXS SoCs
> mxs: prefix register acessor macros with 'mxs' prefix
> mxs: prefix register structs with 'mxs' prefix
> mxs: Reowork SPL to use 'mxs' prefix for methods
> mxs: Clarify why we poweroff in case of brownout in 5v conflict
> mxs: rename mx28.c to mxs.c as it is common to i.MX233 and
> i.MX28 SoCs sc_sps_1: Adjust board config to use 'mxs' SoC code
>
> Stathis Voukelatos (1):
> i.MX28: bug fixes in PMU configuration code
>
> Stefano Babic (1):
> MX5: mx53loco: do not overwrite the console
>
> Veli-Pekka Peltola (1):
> Add support for Bluegiga APX4 Development Kit
>
> MAINTAINERS | 5 +
> Makefile | 2 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +--
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 72 +++--
> .../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 20 +-
> .../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
> .../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 64 ++---
> .../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 274
> ++++++++++----------
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 0
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 8 +-
> .../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
> .../arm/cpu/arm926ejs/mxs}/u-boot.bd | 0
> arch/arm/cpu/armv7/imx-common/cpu.c | 4 +-
> .../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 0
> .../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 0
> .../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
> .../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256
> +++++++++---------
> .../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h | 60 ++---
> .../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
> .../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 ++---
> .../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +++----
> .../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170
> ++++++------ .../asm/{arch-mx28 => arch-mxs}/regs-power.h |
> 30 +-- .../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +--
> .../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +--
> .../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
> .../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
> .../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 10 +-
> board/bluegiga/apx4devkit/Makefile | 47 ++++
> board/bluegiga/apx4devkit/apx4devkit.c | 150 +++++++++++
> board/bluegiga/apx4devkit/spl_boot.c | 164
> ++++++++++++ board/denx/m28evk/m28evk.c |
> 4 +- board/denx/m28evk/spl_boot.c | 2 +-
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx28evk/u-boot.bd | 14 -
> board/freescale/mx51evk/mx51evk.c | 10 +-
> board/freescale/mx53loco/mx53loco.c | 12 +-
> board/schulercontrol/sc_sps_1/Makefile | 47 ++++
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++++++++
> board/schulercontrol/sc_sps_1/spl_boot.c | 165
> ++++++++++++ board/ttcontrol/vision2/vision2.c |
> 11 +- boards.cfg | 6 +-
> doc/README.m28 | 4 +-
> doc/README.mx28evk | 4 +-
> drivers/dma/apbh_dma.c | 32 +--
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/i2c/mxs_i2c.c | 12 +-
> drivers/mmc/mxsmmc.c | 202
> ++++++++------- drivers/mtd/nand/mxs_nand.c
> | 12 +- drivers/rtc/Makefile | 1 +
> drivers/rtc/imxdi.c | 244
> +++++++++++++++++ drivers/rtc/mxsrtc.c
> | 6 +- drivers/spi/mxs_spi.c | 200
> +++++++++++--- drivers/usb/host/ehci-mxs.c |
> 24 +- include/configs/apx4devkit.h | 238
> +++++++++++++++++ include/configs/m28evk.h
> | 4 +- include/configs/mx28evk.h | 6 +-
> include/configs/mx51evk.h | 2 +
> include/configs/mx53loco.h | 2 +
> include/configs/sc_sps_1.h | 208
> +++++++++++++++ include/configs/vision2.h
> | 2 + 75 files changed, 2569 insertions(+), 982 deletions(-)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
> rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
> rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h}
> (81%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
> rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h
> (100%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/iomux-mx28.h (100%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/iomux.h (100%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-apbh.h (77%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-base.h (100%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-bch.h (92%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-clkctrl.h (88%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h
> (77%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h
> (95%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h
> (94%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-lcdif.h (84%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-lradc.h (96%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h
> (93%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-power.h (97%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-rtc.h (91%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-ssp.h (95%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-timrot.h (90%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
> create mode 100644 board/bluegiga/apx4devkit/Makefile create mode
> 100644 board/bluegiga/apx4devkit/apx4devkit.c create mode 100644
> board/bluegiga/apx4devkit/spl_boot.c delete mode 100644
> board/freescale/mx28evk/u-boot.bd create mode 100644
> board/schulercontrol/sc_sps_1/Makefile create mode 100644
> board/schulercontrol/sc_sps_1/sc_sps_1.c create mode 100644
> board/schulercontrol/sc_sps_1/spl_boot.c create mode 100644
> drivers/rtc/imxdi.c create mode 100644 include/configs/apx4devkit.h
> create mode 100644 include/configs/sc_sps_1.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list