[U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx

Stefano Babic sbabic at denx.de
Fri Aug 10 08:54:06 CEST 2012


Hi Albert,

an update pull request, please pull from u-boot-imx, thanks.

The following changes since commit 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:

  DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 42abce776222a5d5cb2b355e77539cabb705b04a:

  sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-10
08:48:24 +0200)

----------------------------------------------------------------
Benoît Thébaudeau (1):
      rtc: imxdi: Initial support

Fabio Estevam (3):
      mx28evk: Turn on caches
      mx51evk: do not overwrite the console
      vision2: do not overwrite the console

Marek Vasut (9):
      MX28: SPI: Refactor spi_xfer a bit
      MX28: SPI: Pull out the PIO transfer function
      MX28: SPI: Add DMA transfer support
      MX28: Fix up the MMC driver DMA mode
      MX28: Split out the PIO and DMA transfer functions
      MX28: Transfer small blocks via PIO in MXS MMC
      MX28: Fix MXS MMC DMA issues
      MX28: Move the u-boot.bd info CPUDIR/SOCDIR
      MX28: Add SchulerControl SC_SPS_1 platform

Otavio Salvador (10):
      imx: Use a clear identification of an unidentified CPU type
      MX28: extend print_cpuinfo() to use chip information
      MX28: use a clear name for DDR2 initialization
      mxs: reorganize source directory for easy sharing of code in i.MXS
SoCs
      mxs: prefix register acessor macros with 'mxs' prefix
      mxs: prefix register structs with 'mxs' prefix
      mxs: Reowork SPL to use 'mxs' prefix for methods
      mxs: Clarify why we poweroff in case of brownout in 5v conflict
      mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
      sc_sps_1: Adjust board config to use 'mxs' SoC code

Stathis Voukelatos (1):
      i.MX28: bug fixes in PMU configuration code

Stefano Babic (1):
      MX5: mx53loco: do not overwrite the console

Veli-Pekka Peltola (1):
      Add support for Bluegiga APX4 Development Kit

 MAINTAINERS                                        |    5 +
 Makefile                                           |    2 +-
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile      |    2 +-
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c       |   40 +--
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c       |    6 +-
 arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c}  |   72 +++--
 .../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} |   14 +-
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c    |   20 +-
 .../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c   |   10 +-
 .../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c |   64 ++---
 .../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c   |  274
++++++++++----------
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S       |    0
 arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c       |    8 +-
 .../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds |    2 +-
 .../arm/cpu/arm926ejs/mxs}/u-boot.bd               |    0
 arch/arm/cpu/armv7/imx-common/cpu.c                |    4 +-
 .../include/asm/{arch-mx28 => arch-mxs}/clock.h    |    0
 arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h |    0
 .../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h |    0
 .../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h |    0
 .../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h       |    0
 .../include/asm/{arch-mx28 => arch-mxs}/iomux.h    |    0
 .../asm/{arch-mx28 => arch-mxs}/regs-apbh.h        |  256
+++++++++---------
 .../asm/{arch-mx28 => arch-mxs}/regs-base.h        |    0
 .../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h |   44 ++--
 .../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h     |   60 ++---
 .../asm/{arch-mx28 => arch-mxs}/regs-common.h      |   34 +--
 .../asm/{arch-mx28 => arch-mxs}/regs-digctl.h      |   56 ++--
 .../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h        |   28 +-
 .../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h |   30 +--
 .../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h       |   66 ++---
 .../asm/{arch-mx28 => arch-mxs}/regs-lradc.h       |   50 ++--
 .../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h       |   88 +++----
 .../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h     |  170 ++++++------
 .../asm/{arch-mx28 => arch-mxs}/regs-power.h       |   30 +--
 .../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h |   30 +--
 .../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h |   42 +--
 .../asm/{arch-mx28 => arch-mxs}/regs-timrot.h      |   40 +--
 .../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h |    2 +-
 .../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h      |   22 +-
 .../asm/{arch-mx28 => arch-mxs}/sys_proto.h        |   10 +-
 board/bluegiga/apx4devkit/Makefile                 |   47 ++++
 board/bluegiga/apx4devkit/apx4devkit.c             |  150 +++++++++++
 board/bluegiga/apx4devkit/spl_boot.c               |  164 ++++++++++++
 board/denx/m28evk/m28evk.c                         |    4 +-
 board/denx/m28evk/spl_boot.c                       |    2 +-
 board/freescale/mx28evk/iomux.c                    |    2 +-
 board/freescale/mx28evk/mx28evk.c                  |    4 +-
 board/freescale/mx28evk/u-boot.bd                  |   14 -
 board/freescale/mx51evk/mx51evk.c                  |   10 +-
 board/freescale/mx53loco/mx53loco.c                |   12 +-
 board/schulercontrol/sc_sps_1/Makefile             |   47 ++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c           |  113 ++++++++
 board/schulercontrol/sc_sps_1/spl_boot.c           |  165 ++++++++++++
 board/ttcontrol/vision2/vision2.c                  |   11 +-
 boards.cfg                                         |    6 +-
 doc/README.m28                                     |    4 +-
 doc/README.mx28evk                                 |    4 +-
 drivers/dma/apbh_dma.c                             |   32 +--
 drivers/gpio/mxs_gpio.c                            |   16 +-
 drivers/i2c/mxs_i2c.c                              |   12 +-
 drivers/mmc/mxsmmc.c                               |  202 ++++++++-------
 drivers/mtd/nand/mxs_nand.c                        |   12 +-
 drivers/rtc/Makefile                               |    1 +
 drivers/rtc/imxdi.c                                |  244 +++++++++++++++++
 drivers/rtc/mxsrtc.c                               |    6 +-
 drivers/spi/mxs_spi.c                              |  200 +++++++++++---
 drivers/usb/host/ehci-mxs.c                        |   24 +-
 include/configs/apx4devkit.h                       |  238 +++++++++++++++++
 include/configs/m28evk.h                           |    4 +-
 include/configs/mx28evk.h                          |    6 +-
 include/configs/mx51evk.h                          |    2 +
 include/configs/mx53loco.h                         |    2 +
 include/configs/sc_sps_1.h                         |  208 +++++++++++++++
 include/configs/vision2.h                          |    2 +
 75 files changed, 2569 insertions(+), 982 deletions(-)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
 rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
 rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
 rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
 rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h (88%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h (77%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h (95%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h (94%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h (84%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h (96%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h (93%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-power.h (97%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h (91%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h (95%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-timrot.h (90%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
 rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
 create mode 100644 board/bluegiga/apx4devkit/Makefile
 create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c
 create mode 100644 board/bluegiga/apx4devkit/spl_boot.c
 delete mode 100644 board/freescale/mx28evk/u-boot.bd
 create mode 100644 board/schulercontrol/sc_sps_1/Makefile
 create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
 create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
 create mode 100644 drivers/rtc/imxdi.c
 create mode 100644 include/configs/apx4devkit.h
 create mode 100644 include/configs/sc_sps_1.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list