[U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory

[Stefano Babic]

On 17/08/2012 20:15, Matt Sealey wrote:
> Use calloc() instead of malloc() to allocate the mxs_spi_slave structure.
> Clearing the memory is necessary since most of the time this gets done
> super early in boot, but on warm reboots, and when SPI probing is done
> long after the init stages it could actually pick up previously used memory,
> and things like the chipselect polarity and other data end up being filled
> with trash data if not explicitly set by the board files.
> 
> This solves a semi-random, almost unreproducable error whereby SPI devices
> act very, very strangly on boot.
> 
> Signed-off-by: Matt Sealey <matt at genesi-usa.com>
> ---
>  drivers/spi/mxs_spi.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
> index a037c13..5fa7f2b 100644
> --- a/drivers/spi/mxs_spi.c
> +++ b/drivers/spi/mxs_spi.c
> @@ -91,7 +91,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
>  		return NULL;
>  	}
>  
> -	mxs_slave = malloc(sizeof(struct mxs_spi_slave));
> +	mxs_slave = calloc(sizeof(struct mxs_spi_slave), 1);
>  	if (!mxs_slave)
>  		return NULL;
>  
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================