[U-Boot] [PATCH] block: systemace: Simplify base and width initialization

Michal Simek monstr at monstr.eu
Fri Aug 10 08:39:05 CEST 2012


On 08/06/2012 09:52 AM, Michal Simek wrote:
> Use CONFIG parameters only at one location to simplify
> the code. Also create ace_readw/writew functions.
>
> Signed-off-by: Michal Simek <monstr at monstr.eu>
> ---
>   drivers/block/systemace.c |   38 +++++++++++++++++++++++++-------------
>   1 files changed, 25 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
> index 58402b9..247cf06 100644
> --- a/drivers/block/systemace.c
> +++ b/drivers/block/systemace.c
> @@ -51,24 +51,36 @@
>    * to be the base address for the chip, usually in the local
>    * peripheral bus.
>    */
> -#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
> +
> +static u32 base = CONFIG_SYS_SYSTEMACE_BASE;
> +static u32 width = CONFIG_SYS_SYSTEMACE_WIDTH;
> +
> +static void ace_writew(u16 val, unsigned off)
> +{
> +	if (width == 8) {
>   #if !defined(__BIG_ENDIAN)
> -#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
> -			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
> -#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
> -			      writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
> +		writeb(val >> 8, base + off);
> +		writeb(val, base + off + 1);
>   #else
> -#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
> -			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
> -#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
> -			      writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
> +		writeb(val, base + off);
> +		writeb(val >> 8, base + off + 1);
>   #endif
> +	}
> +	out16(base + off, val);
> +}
> +
> +static u16 ace_readw(unsigned off)
> +{
> +	if (width == 8) {
> +#if !defined(__BIG_ENDIAN)
> +		return (readb(base + off) << 8) | readb(base + off + 1);
>   #else
> -#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
> -#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
> +		return readb(base + off) | (readb(base + off + 1) << 8);
>   #endif
> +	}
>
> -/* */
> +	return in16(base + off);
> +}
>
>   static unsigned long systemace_read(int dev, unsigned long start,
>   				    unsigned long blkcnt, void *buffer);
> @@ -121,7 +133,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
>   		/*
>   		 * Ensure the correct bus mode (8/16 bits) gets enabled
>   		 */
> -		ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
> +		ace_writew(width == 8 ? 0 : 0x0001, 0);
>
>   		init_part(&systemace_dev);
>
>

Applied to microblaze custodian tree.

Michal


-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian


More information about the U-Boot mailing list