[U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants
Marek Vasut
marex at denx.de
Fri Aug 10 01:28:16 CEST 2012
Dear Benoît Thébaudeau,
> Dear Marek Vasut,
>
> > > > > @@ -246,19 +247,20 @@ ehci_submit_async(struct usb_device *dev,
> > > > > unsigned
> > > > > long pipe, void *buffer, */
> > > > >
> > > > > qh->qh_link = cpu_to_hc32((uint32_t)qh_list |
> > > > > QH_LINK_TYPE_QH);
> > > > > c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
> > > > >
> > > > > - usb_pipeendpoint(pipe) == 0) ? 1 : 0;
> > > > > - endpt = (8 << 28) |
> > > > > - (c << 27) |
> > > > > - (usb_maxpacket(dev, pipe) << 16) |
> > > > > - (0 << 15) |
> > > > > - (1 << 14) |
> > > > > - (usb_pipespeed(pipe) << 12) |
> > > > > - (usb_pipeendpoint(pipe) << 8) |
> > > > > - (0 << 7) | (usb_pipedevice(pipe) << 0);
> > > > > + usb_pipeendpoint(pipe) == 0);
> > > > > + endpt = (8 << QH_ENDPT1_RL) |
> > > > > + (c << QH_ENDPT1_C) |
> > > >
> > > > Maybe define it as #deifne QH_ENDPT1(x) ((x) << SEOMTHING) ?
> > > > [...]
> > >
> > > For all of these?
> >
> > Yes, do you not think it's better than define the offsets only?
>
> Yes, I hesitated with this solution when writing this code.
>
> Where the offset is needed, I can instead write additional extraction
> macros.
Oh, there're places where the offset is needed? What about adding both BIT(x)
and BIT_OFFSET in such cases ? And BIT(x) (x << BIT_OFFSET) in that case.
[...]
Best regards,
Marek Vasut
More information about the U-Boot
mailing list