[U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'
Stefano Babic
sbabic at denx.de
Mon Aug 27 08:28:40 CEST 2012
On 22/08/2012 22:10, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>>
>
> For representing a timeout value, it makes more sense to pass it as
> 'unsigned int'.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 6 ++++--
> arch/arm/include/asm/arch-mxs/sys_proto.h | 4 ++--
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
> index c028e5e..19c79f2 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
> +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
> @@ -81,7 +81,8 @@ void enable_caches(void)
> #endif
> }
>
> -int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
> +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
> + int timeout)
> {
> while (--timeout) {
> if ((readl(®->reg) & mask) == mask)
> @@ -92,7 +93,8 @@ int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
> return !timeout;
> }
>
> -int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, int timeout)
> +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
> + int timeout)
> {
> while (--timeout) {
> if ((readl(®->reg) & mask) == 0)
> diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
> index 4610363..983b888 100644
> --- a/arch/arm/include/asm/arch-mxs/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
> @@ -26,10 +26,10 @@
> int mxs_reset_block(struct mxs_register_32 *reg);
> int mxs_wait_mask_set(struct mxs_register_32 *reg,
> uint32_t mask,
> - int timeout);
> + unsigned int timeout);
> int mxs_wait_mask_clr(struct mxs_register_32 *reg,
> uint32_t mask,
> - int timeout);
> + unsigned int timeout);
>
> int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int));
>
>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list