[U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux

[Dirk Behme]

On 01.08.2012 13:05, Dirk Behme wrote:
> A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound
> on the SabreLite board. To make this work, U-Boot has to configure the
> pin mux for PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly.
> 
> Taken from Freescale's ER5 U-Boot for the SabreLite.
> 
> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
> CC: Troy Kisky <troy.kisky at boundarydevices.com>
> CC: Stefano Babic <sbabic at denx.de>
> ---
>  board/freescale/mx6qsabrelite/imximage.cfg |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg
> index 62498ab..2d7825a 100644
> --- a/board/freescale/mx6qsabrelite/imximage.cfg
> +++ b/board/freescale/mx6qsabrelite/imximage.cfg
> @@ -168,3 +168,6 @@ DATA 4 0x020e0010 0xF00000CF
>  # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>  DATA 4 0x020e0018 0x007F007F
>  DATA 4 0x020e001c 0x007F007F
> +# set PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2
> +DATA 4 0x020e0220 0x00000000
> +DATA 4 0x020e022c 0x00000004
> \ No newline at end of file

This is replaced with a kernel patch

http://www.spinics.net/lists/arm-kernel/msg187222.html

and therefore this patch is obsolete now.

Thanks

Dirk