[U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux

[Stefano Babic]

On 02/08/2012 09:36, Dirk Behme wrote:
> On 01.08.2012 13:05, Dirk Behme wrote:
>> A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound
>> on the SabreLite board. To make this work, U-Boot has to configure the
>> pin mux for PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly.
>>
>> Taken from Freescale's ER5 U-Boot for the SabreLite.
>>
>> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
>> CC: Troy Kisky <troy.kisky at boundarydevices.com>
>> CC: Stefano Babic <sbabic at denx.de>
>> ---
>>  board/freescale/mx6qsabrelite/imximage.cfg |    3 +++
>>  1 files changed, 3 insertions(+), 0 deletions(-)
>>
>> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg
>> b/board/freescale/mx6qsabrelite/imximage.cfg
>> index 62498ab..2d7825a 100644
>> --- a/board/freescale/mx6qsabrelite/imximage.cfg
>> +++ b/board/freescale/mx6qsabrelite/imximage.cfg
>> @@ -168,3 +168,6 @@ DATA 4 0x020e0010 0xF00000CF
>>  # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>>  DATA 4 0x020e0018 0x007F007F
>>  DATA 4 0x020e001c 0x007F007F
>> +# set PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2
>> +DATA 4 0x020e0220 0x00000000
>> +DATA 4 0x020e022c 0x00000004
>> \ No newline at end of file
> 
> This is replaced with a kernel patch
> 
> http://www.spinics.net/lists/arm-kernel/msg187222.html
> 
> and therefore this patch is obsolete now.

Ok, thanks.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================