[U-Boot] [PATCH 2/5] am33xx: Correct MMC1, remove MMC2 support
Tom Rini
trini at ti.com
Thu Aug 9 20:13:14 CEST 2012
- Correct the MMC1 base offset
- Remove MMC2 (that area is reserved and not MMC2).
- Add the real BOOT_DEVICE_MMC2 value
Signed-off-by: Tom Rini <trini at ti.com>
---
arch/arm/cpu/armv7/am33xx/board.c | 8 +++++++-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 +--
arch/arm/include/asm/omap_common.h | 2 +-
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 2ca4ca7..b387ac2 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -211,7 +211,13 @@ void s_init(void)
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ int ret;
+
+ ret = omap_mmc_init(0, 0, 0);
+ if (ret)
+ return ret;
+
+ return omap_mmc_init(1, 0, 0);
}
#endif
diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
index 26cc300..1f597c0 100644
--- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -20,8 +20,7 @@
* OMAP HSMMC register definitions
*/
#define OMAP_HSMMC1_BASE 0x48060100
-#define OMAP_HSMMC2_BASE 0x481D8000
-#define OMAP_HSMMC3_BASE 0x47C24000
+#define OMAP_HSMMC2_BASE 0x481D8100
typedef struct hsmmc {
unsigned char res1[0x10];
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 4e95eee..71ef9b0 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -67,7 +67,7 @@ void preloader_console_init(void);
#elif defined(CONFIG_AM33XX) /* AM33XX */
#define BOOT_DEVICE_NAND 5
#define BOOT_DEVICE_MMC1 8
-#define BOOT_DEVICE_MMC2 0
+#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_MMC2_2 0xFF
#endif
--
1.7.9.5
More information about the U-Boot
mailing list