[U-Boot] [PATCH v4 0/20] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
trini at ti.com
Sat Aug 25 01:58:14 CEST 2012
Hey all,
The following patch series merges the davinci and omap-common SPL
frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a
few small cleanups to the code to make it a little smaller and more
flexible. The end result is that davinci can now opt in on
SPL-boots-Linux by just setting the right defines and other platforms
would just need to adapt to this framework. In my testing, davinci
gains between 300 and 700 bytes for this (not enabling the SPL OS
feature) and omap4/5/etc lose just a little bit (from the printf->puts
changes). I've tested this on omap3_beagle (xM and classic) and
omap4_panda. I don't have any davinci platforms that were previously
using SPL so I can't boot-test those changes but since everyone sets
CONFIG_SPL_MAX_SIZE, we're OK in that department.
To make this series easier to test I've placed it on
http://github.com/trini/u-boot WIP/spl-improvements
I've looked a little into re-reducing the size and the biggest problem I
see is that SPI a lot of informational prints that we don't need,
strictly speaking, but are nice in a normal U-Boot context. I'm unsure
of the best way to quiet these as I don't like the idea of sprinkling
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303 and I'm sending
another email to discuss that.
--
Tom
Changes in v2:
- Add CONFIG_SYS_SPL_MALLOC_START / SIZE defines from Christian Riesch
- Add README.da850_am18xxevm
- Add arch/arm/cpu/arm926ejs/davinci/config.mk to build u-boot.ais
- Fix checkpatch warning (u32* boot_params_ptr -> u32 *boot_params_ptr)
- Place files into common/spl (due to gcc bug #54303) and include/spl.h
- Reorder all of the patches that used to follow this to precede.
Changes in v3:
CONFIG_SPL_FRAMEWORK
perform early init. Fixes the cannot reset problem.
- Fix checkpatch.pl warning
- Fix thinko, Nand -> SPI (spotted by Prabhakar Lad)
- Make u-boot.ais use u-boot.img not u-boot.bin, now that it uses
- Make use of board_init_f being a weak function now so that we can
- Rename to README.da850, add more direct recovery method (Christian Riesch)
Changes in v4:
- Adapt davinci to new board_init_f requirements
- Add Stefano's patch for CONFIG_SYS_MONITOR_LEN
- Based on PowerPC, use memset to clear BSS rather than relocate_code
- Document what board_init_f must do
- Further re-word README.da850 based on feedback from Christian Riesch
- Leave nand_spl_load.c alone, move the new load into nand_spl_simple.c
- Make board_init_f setup the global data pointer, after clearing BSS.
- Move board_init_f / jump_to_image_linux to arch/arm/lib/spl.c
Stefano Babic (1):
SPL: do not use fix value for u-boot size
Tom Rini (19):
Makefile: Move SPL files to clobber, remove from clean
spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
omap-common: Fix typo in save_boot_params() in lowlevel_init.S
ARM: SPL: Rename omap_boot_device to spl_boot_device
ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
ARM: SPL: Only call mem_malloc_init if configured
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
ARM: SPL: Make spl_mmc.c more generic
ARM: SPL: Clean up spl.c / spl_nand.c slightly
ARM: SPL: Start hooking in the current SPI SPL support
ARM: SPL: Move gpmc_init() to spl_board_init()
SPL: Move the omap SPL framework to common/spl
SPL: Create arch/arm/lib/spl.c for board_init_f and
jump_to_image_linux
ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
da850: Add README.da850
SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c
SPL: SPI: Enhance spi_spl_load to match the other load functions
Makefile | 16 +--
README | 9 ++
arch/arm/cpu/arm926ejs/davinci/Makefile | 2 +-
arch/arm/cpu/arm926ejs/davinci/config.mk | 16 +++
arch/arm/cpu/arm926ejs/davinci/spl.c | 60 +++++------
arch/arm/cpu/arm926ejs/start.S | 20 +---
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 13 ---
arch/arm/cpu/armv7/omap-common/boot-common.c | 27 ++++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 7 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 6 +-
arch/arm/cpu/armv7/omap-common/spl_nand.c | 111 --------------------
arch/arm/cpu/armv7/omap3/board.c | 28 +++--
arch/arm/cpu/armv7/start.S | 13 +--
arch/arm/include/asm/arch-am33xx/spl.h | 31 ++++++
arch/arm/include/asm/arch-davinci/spl.h | 28 +++++
arch/arm/include/asm/arch-omap3/spl.h | 34 ++++++
arch/arm/include/asm/arch-omap4/spl.h | 35 ++++++
arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
arch/arm/include/asm/arch-omap5/spl.h | 35 ++++++
arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
arch/arm/include/asm/omap_common.h | 77 --------------
arch/arm/include/asm/spl.h | 29 +++++
arch/arm/lib/Makefile | 2 +
arch/arm/lib/spl.c | 72 +++++++++++++
board/davinci/da8xxevm/README.da850 | 68 ++++++++++++
board/overo/overo.c | 10 --
common/spl/Makefile | 37 +++++++
.../arm/cpu/armv7/omap-common => common/spl}/spl.c | 86 +++++----------
.../armv7/omap-common => common/spl}/spl_ymodem.c | 3 +-
drivers/mmc/Makefile | 5 +
.../armv7/omap-common => drivers/mmc}/spl_mmc.c | 24 ++---
drivers/mtd/nand/nand_spl_simple.c | 76 ++++++++++++++
drivers/mtd/spi/spi_spl_load.c | 23 ++--
include/configs/am335x_evm.h | 1 +
include/configs/am3517_crane.h | 2 +
include/configs/am3517_evm.h | 2 +
include/configs/cam_enc_4xx.h | 3 +-
include/configs/da850evm.h | 5 +
include/configs/devkit8000.h | 1 +
include/configs/hawkboard.h | 3 +-
include/configs/mcx.h | 2 +
include/configs/omap3_beagle.h | 1 +
include/configs/omap3_evm_common.h | 1 +
include/configs/omap3_overo.h | 1 +
include/configs/omap4_common.h | 2 +
include/configs/omap5_evm.h | 2 +
include/configs/tam3517-common.h | 2 +
include/configs/tricorder.h | 1 +
include/spl.h | 72 +++++++++++++
spl/Makefile | 1 +
51 files changed, 721 insertions(+), 388 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/config.mk
delete mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
create mode 100644 arch/arm/include/asm/arch-am33xx/spl.h
create mode 100644 arch/arm/include/asm/arch-davinci/spl.h
create mode 100644 arch/arm/include/asm/arch-omap3/spl.h
create mode 100644 arch/arm/include/asm/arch-omap4/spl.h
create mode 100644 arch/arm/include/asm/arch-omap5/spl.h
create mode 100644 arch/arm/include/asm/spl.h
create mode 100644 arch/arm/lib/spl.c
create mode 100644 board/davinci/da8xxevm/README.da850
create mode 100644 common/spl/Makefile
rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl.c (71%)
rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl_ymodem.c (96%)
rename {arch/arm/cpu/armv7/omap-common => drivers/mmc}/spl_mmc.c (91%)
create mode 100644 include/spl.h
--
1.7.9.5
More information about the U-Boot
mailing list