[U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Sat Aug 25 13:30:00 CEST 2012
Hi Tom,
On Fri, 24 Aug 2012 16:40:09 -0700, Tom Rini <trini at ti.com> wrote:
> Hello,
>
> The following changes since commit
> a1cd53c6b6e2e7fbf4ffa20d3548646e4c94efe5:
>
> sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-14
> 00:36:30 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to
> 56540ed12d86a998ebd8f9ec8d55828c30ab1f14:
>
> davinci, c6x: Always use C version of reset code (2012-08-24
> 15:50:35 -0700)
>
> ----------------------------------------------------------------
> Heiko Schocher (1):
> davinci: enbw_cmc: change switch init behaviour
>
> Jeroen Hofstee (1):
> arm: omap: Fix switching back to nandecc sw.
>
> Satyanarayana, Sandhya (1):
> am33xx evm: Update secure_emif_sdram_config during ddr init
>
> Sughosh Ganu (1):
> da8xx/hawkboard: Add support for ohci host controller
>
> Tom Rini (8):
> am335x evm: Initial support for AM335x GP EVM Profiles
> am33xx: Correct MMC1, remove MMC2 support
> am335x evm: Enable MMC1 pinmux
> am33xx: Add support, update omap3 McSPI driver
> am335x evm: Enable support for spi0
> omap4/5/am33xx: Make lowlevel_init available to all armv7
> platforms armv7: Make lowlevel_init.S's lowlevel_init do ABI
> compatible stack davinci, c6x: Always use C version of reset code
>
> arch/arm/cpu/arm926ejs/davinci/Makefile | 4 +-
> arch/arm/cpu/arm926ejs/davinci/psc.c | 5 +
> arch/arm/cpu/arm926ejs/davinci/reset.S | 81
> ---------------- arch/arm/cpu/arm926ejs/davinci/reset.c
> | 33 +++++++ arch/arm/cpu/armv7/Makefile
> | 6 +- arch/arm/cpu/armv7/am33xx/board.c | 8 +-
> arch/arm/cpu/armv7/am33xx/clock.c | 5 +
> arch/arm/cpu/armv7/am33xx/ddr.c | 5 +-
> arch/arm/cpu/armv7/lowlevel_init.S | 51 ++++++++++
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 18 ----
> arch/arm/include/asm/arch-am33xx/cpu.h | 2 +
> arch/arm/include/asm/arch-am33xx/hardware.h | 3 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 +-
> arch/arm/include/asm/arch-am33xx/omap.h | 1 -
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
> .../arm/include/asm/arch-davinci/da8xx-usb.h | 7 +-
> arch/arm/include/asm/arch-davinci/hardware.h | 1 +
> arch/arm/include/asm/arch-omap4/omap.h | 1 -
> arch/arm/include/asm/arch-omap5/omap.h | 2 -
> arch/arm/include/asm/omap_common.h | 2 +-
> board/davinci/da8xxevm/hawkboard.c | 41 ++++++++
> board/enbw/enbw_cmc/enbw_cmc.c | 102
> +++++++++++++-------
> board/ti/am335x/mux.c | 73
> +++++++++++++- drivers/mtd/nand/omap_gpmc.c
> | 1 + drivers/spi/omap3_spi.c | 16
> +++ drivers/spi/omap3_spi.h | 5 +
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ohci-da8xx.c | 48 +++++++++
> drivers/usb/musb/da8xx.c | 3 +-
> include/configs/am335x_evm.h | 13 ++-
> include/configs/hawkboard.h | 14 ++-
> include/configs/omap4_common.h | 7 +-
> include/configs/omap5_evm.h | 7 +- 33 files
> changed, 404 insertions(+), 166 deletions(-) delete mode 100644
> arch/arm/cpu/arm926ejs/davinci/reset.S create mode 100644
> arch/arm/cpu/arm926ejs/davinci/reset.c create mode 100644
> arch/arm/cpu/armv7/lowlevel_init.S rename drivers/usb/musb/da8xx.h =>
> arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%) create mode
> 100644 drivers/usb/host/ohci-da8xx.c
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list