[U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
Stefano Babic
sbabic at denx.de
Sun Aug 5 09:27:53 CEST 2012
On 01/08/2012 15:14, Marek Vasut wrote:
> This i.MX28 platform supports the following:
> * 2x FEC ethernet
> * USB on USBH0
> * I2C EEPROM
> * SPI NVRAM
> * LEDs
>
Hi Marek,
> +#########################################################################
> diff --git a/board/schulercontrol/sc_sps_1/sc_sps_1.c b/board/schulercontrol/sc_sps_1/sc_sps_1.c
> new file mode 100644
> index 0000000..0fee289
> --- /dev/null
> +++ b/board/schulercontrol/sc_sps_1/sc_sps_1.c
> @@ -0,0 +1,113 @@
> +/*
> + * SchulerControl GmbH, SC_SPS_1 module
> + *
> + * Copyright (C) 2012 Marek Vasut <marex at denx.de>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/mii.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <errno.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Functions
> + */
> +int board_early_init_f(void)
> +{
> + /* IO0 clock at 480MHz */
> + mx28_set_ioclk(MXC_IOCLK0, 480000);
> + /* IO1 clock at 480MHz */
> + mx28_set_ioclk(MXC_IOCLK1, 480000);
> +
> + /* SSP0 clock at 96MHz */
> + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
> + /* SSP2 clock at 96MHz */
> + mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
> +
> +#ifdef CONFIG_CMD_USB
> + mxs_iomux_setup_pad(MX28_PAD_AUART1_CTS__USB0_OVERCURRENT);
> + mxs_iomux_setup_pad(MX28_PAD_AUART2_TX__GPIO_3_9 |
> + MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL);
> + gpio_direction_output(MX28_PAD_AUART2_TX__GPIO_3_9, 1);
> +#endif
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* Adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + return mx28_dram_init();
> +}
> +
> +#ifdef CONFIG_CMD_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + return mxsmmc_initialize(bis, 0, NULL);
> +}
> +#endif
> +
> +#ifdef CONFIG_CMD_NET
> +int board_eth_init(bd_t *bis)
> +{
> + struct mx28_clkctrl_regs *clkctrl_regs =
> + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> + int ret;
> +
> + ret = cpu_eth_init(bis);
> +
> + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
> + CLKCTRL_ENET_TIME_SEL_MASK,
> + CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN);
> +
> + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
> + if (ret) {
> + printf("FEC MXS: Unable to init FEC0\n");
> + return ret;
> + }
> +
> + ret = fecmxc_initialize_multi(bis, 1, 1, MXS_ENET1_BASE);
> + if (ret) {
> + printf("FEC MXS: Unable to init FEC1\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +#endif
> diff --git a/board/schulercontrol/sc_sps_1/spl_boot.c b/board/schulercontrol/sc_sps_1/spl_boot.c
> new file mode 100644
> index 0000000..4d2151d
> --- /dev/null
> +++ b/board/schulercontrol/sc_sps_1/spl_boot.c
> @@ -0,0 +1,165 @@
> +/*
> + * SchulerControl GmbH, SC_SPS_1 module setup
> + *
> + * Copyright (C) 2012 Marek Vasut <marex at denx.de>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +
> +#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
> +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
> +#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
> +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +
> +const iomux_cfg_t iomux_setup[] = {
> + /* -- Strick 3 -- */
> +
> + /* FEC Ethernet */
> + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
> +
> + MX28_PAD_ENET0_TX_CLK__GPIO_4_5, /* ENET INT */
> +
> + MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
> +
> + /* -- Strick 4 -- */
> +
> + /* EMI */
> + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> +
> + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> +
> + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> +
> + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> +
> + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> +
> + /* -- Strick 5 -- */
> +
> + /* MMC0 */
> + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
> + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
> + MX28_PAD_SSP0_SCK__SSP0_SCK |
> + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
> +
> + /* SPI2 (for flash) */
> + MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
> + MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
> + MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
> + MX28_PAD_SSP2_SS0__SSP2_D3 |
> + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
> +
> + /* -- Strick 6 -- */
> +
> + /* I2C */
> + MX28_PAD_I2C0_SCL__I2C0_SCL,
> + MX28_PAD_I2C0_SDA__I2C0_SDA,
> +
> + /* AUART0 */
> + MX28_PAD_AUART0_TX__AUART0_TX,
> + MX28_PAD_AUART0_RX__AUART0_RX,
> +
> + /* MEGA interface */
> +
> + /* Debug UART */
> + MX28_PAD_PWM0__DUART_RX,
> + MX28_PAD_PWM1__DUART_TX,
> +
> + /* LED */
> + MX28_PAD_GPMI_D00__GPIO_0_0 | MUX_CONFIG_LED,
> + MX28_PAD_GPMI_D03__GPIO_0_3 | MUX_CONFIG_LED,
> + MX28_PAD_GPMI_D06__GPIO_0_6 | MUX_CONFIG_LED,
> +};
> +
> +void board_init_ll(void)
> +{
> + mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
> +}
> +
> +void mx28_adjust_memory_params(uint32_t *dram_vals)
> +{
> + dram_vals[0x74 >> 2] = 0x0f02010a;
> +}
> diff --git a/board/schulercontrol/sc_sps_1/u-boot.bd b/board/schulercontrol/sc_sps_1/u-boot.bd
> new file mode 100644
> index 0000000..c60615a
> --- /dev/null
> +++ b/board/schulercontrol/sc_sps_1/u-boot.bd
> @@ -0,0 +1,14 @@
> +sources {
> + u_boot_spl="spl/u-boot-spl.bin";
> + u_boot="u-boot.bin";
> +}
> +
> +section (0) {
> + load u_boot_spl > 0x0000;
> + load ivt (entry = 0x0014) > 0x8000;
> + hab call 0x8000;
> +
> + load u_boot > 0x40000100;
> + load ivt (entry = 0x40000100) > 0x8000;
> + hab call 0x8000;
> +}
This is the fourth copy of the same file in u-boot. Do we have really no
chance to share it among boards ?
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list