[U-Boot] [PATCH v2 18/18] SPL: Enhance spi_spl_load to match the other load functions
Tom Rini
trini at ti.com
Mon Aug 20 18:45:53 CEST 2012
Signed-off-by: Tom Rini <trini at ti.com>
---
common/spl/spl.c | 4 ++--
drivers/mtd/spi/spi_spl_load.c | 23 ++++++++++++-----------
include/spl.h | 2 +-
3 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 3a2740a..7d15460 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -177,8 +177,8 @@ void board_init_r(gd_t *id, ulong dummy)
#endif
#ifdef CONFIG_SPL_SPI_SUPPORT
case BOOT_DEVICE_SPI:
- spi_boot();
- break;
+ spl_spi_load_image();
+ break;
#endif
default:
puts("SPL: Un-supported Boot Device\n");
diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c
index 1aa30ac..d4f81f2 100644
--- a/drivers/mtd/spi/spi_spl_load.c
+++ b/drivers/mtd/spi/spi_spl_load.c
@@ -24,16 +24,17 @@
#include <common.h>
#include <spi_flash.h>
+#include <spl.h>
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
-void spi_boot(void)
+void spl_spi_load_image(void)
{
struct spi_flash *flash;
- void (*uboot)(void) __noreturn;
+ struct image_header *header;
/*
* Load U-Boot image from SPI flash into RAM
@@ -42,17 +43,17 @@ void spi_boot(void)
flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3);
if (!flash) {
- puts("failed.\n");
+ puts("SPI probe failed.\n");
hang();
}
- spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
- CONFIG_SYS_SPI_U_BOOT_SIZE,
- (void *) CONFIG_SYS_TEXT_BASE);
+ /* use CONFIG_SYS_TEXT_BASE as temporary storage area */
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
- /*
- * Jump to U-Boot image
- */
- uboot = (void *) CONFIG_SYS_TEXT_BASE;
- (*uboot)();
+ /* Load u-boot, mkimage header is 64 bytes. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+ (void *) header);
+ spl_parse_image_header(header);
+ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
}
diff --git a/include/spl.h b/include/spl.h
index af9ef71..c0cb62e 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -61,7 +61,7 @@ void spl_mmc_load_image(void);
void spl_ymodem_load_image(void);
/* SPI SPL functions */
-void spi_boot(void);
+void spl_spi_load_image(void);
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void);
--
1.7.9.5
More information about the U-Boot
mailing list