[U-Boot] [PATCH v2 0/5] Tegra 2 USB ULPI series

[Lucas Stach]

With this series we are able to initialize USB controllers
using an external ULPI phy AKA USB2 on Tegra 2 devices.

This was tested to work on a Toradex Colibri T20 board,
where USB2 is used to access the ASIX ethernet chipset.
Testing was done with "tegra20: usb: rework set_host_mode" [1]
applied. I did not spot any regressions on the UTMI ports.

v2 incorporates all the review feedback I've got so far,
including now trying harder to enable VBus in all configurations.

Patch 3 is already in u-boot-usb and only provided as the ULPI
init code now depends on it.
Igor could you please take a look at Patch 4?

Patchset is based on top of u-boot-tegra/next

[1] http://lists.denx.de/pipermail/u-boot/2012-August/130177.html

Lucas Stach (5):
  tegra20: complete periph_id enum
  tegra20: add clock_set_pllout function
  usb: fix ulpi_set_vbus prototype
  usb: ulpi: add indicator configuration function
  tegra20: add USB ULPI init code

 arch/arm/cpu/armv7/tegra20/usb.c            | 154 +++++++++++++++++++++++-----
 arch/arm/cpu/tegra20-common/clock.c         |  39 +++++++
 arch/arm/cpu/tegra20-common/warmboot_avp.c  |   2 +-
 arch/arm/include/asm/arch-tegra20/clk_rst.h |  11 +-
 arch/arm/include/asm/arch-tegra20/clock.h   |  25 +++++
 arch/arm/include/asm/arch-tegra20/usb.h     |  29 +++++-
 drivers/usb/ulpi/ulpi.c                     |  26 ++++-
 include/usb/ulpi.h                          |  13 ++-
 8 Dateien geändert, 262 Zeilen hinzugefügt(+), 37 Zeilen entfernt(-)

-- 
1.7.11.4