[U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary

Andreas Bießmann andreas.devel at googlemail.com
Thu Aug 16 18:01:51 CEST 2012


A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.

Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
cc: Jens Scharsig <esw at bus-elektronik.de>
cc: Stelian Pop <stelian at popies.net>
cc: Sedji Gaouaou<sedji.gaouaou at atmel.com>
cc: Albin Tonnerre <albin.tonnerre at free-electrons.com>
cc: Eric Benard <eric at eukrea.com>
---
 board/BuS/eb_cpux9k2/cpux9k2.c                  |    2 --
 board/BuS/vl_ma2sc/vl_ma2sc.c                   |    3 ---
 board/atmel/at91sam9261ek/at91sam9261ek.c       |    3 ---
 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |    3 ---
 board/atmel/at91sam9rlek/at91sam9rlek.c         |    3 ---
 board/calao/sbc35_a9g20/sbc35_a9g20.c           |    3 ---
 board/calao/tny_a9260/tny_a9260.c               |    3 ---
 board/eukrea/cpuat91/cpuat91.c                  |    2 --
 8 files changed, 22 deletions(-)

diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index 54f9b64..776226f 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -59,8 +59,6 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIO;
-	/* Enable Ctrlc */
-	console_init_f();
 
 	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
 	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index 62ed6fb..84b2060 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -244,9 +244,6 @@ int board_init(void)
 	writel(pin, &pio->piod.odr);
 	writel(pin, &pio->piod.owdr);
 
-	/* Enable Ctrlc */
-	console_init_f();
-
 	gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 47ab839..d30a1ee 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -242,9 +242,6 @@ void lcd_show_board_info(void)
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
-
 #ifdef CONFIG_AT91SAM9G10EK
 	/* arch number of AT91SAM9G10EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 5a04274..d02312c 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -258,9 +258,6 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
-
 	/* arch number of AT91SAM9M10G45EK-Board */
 #ifdef CONFIG_AT91SAM9M10G45EK
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index ef0ddd7..e92ec6e 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -192,9 +192,6 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
-
 	/* arch number of AT91SAM9RLEK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
 	/* adress of boot parameters */
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index b6c8791..d3b3684 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -149,9 +149,6 @@ static void sbc35_a9g20_macb_hw_init(void)
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
-
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c
index 31074d0..86e7e65 100644
--- a/board/calao/tny_a9260/tny_a9260.c
+++ b/board/calao/tny_a9260/tny_a9260.c
@@ -83,9 +83,6 @@ static void tny_a9260_nand_hw_init(void)
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
-
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
index f654f87..c74c3fc 100644
--- a/board/eukrea/cpuat91/cpuat91.c
+++ b/board/eukrea/cpuat91/cpuat91.c
@@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_init(void)
 {
-	/* Enable Ctrlc */
-	console_init_f();
 	/* arch number of CPUAT91-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
 	/* adress of boot parameters */
-- 
1.7.10.4



More information about the U-Boot mailing list