[U-Boot] [PATCH] net/phy: support the mv88e6352 switch

[Prafulla Wadaskar]

> -----Original Message-----
> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> Sent: 16 August 2012 16:47
> To: u-boot at lists.denx.de
> Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar; Joe
> Hershberger
> Subject: [PATCH] net/phy: support the mv88e6352 switch
> 
> This patch add support for the configuration of an external switch
> from
> the 88E6xxx series from Marvell trough an MDIO link using indirect
> adressing. This can be used if we do not want to use an EEPROM for the
> configuration.
> 
> This driver is not generic and was not tested on other switches than
> the
> 88e6352. This is proposed as a first implementation that is somewhat
> limited but works and that can be used as a basis for further
> developments for this switch family.
> 
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> cc: Holger Brunck <holger.brunck at keymile.com>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Joe Hershberger <joe.hershberger at gmail.com>
> ---
>  drivers/net/phy/Makefile    |    1 +
>  drivers/net/phy/mv88e6352.c |  318
> +++++++++++++++++++++++++++++++++++++++++++
>  include/mv88e6352.h         |   92 +++++++++++++
>  3 files changed, 411 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/phy/mv88e6352.c
>  create mode 100644 include/mv88e6352.h

Hi Valentin

I do not have any specific feedback for this patch,
To me this looks okay.

Joe may pull it if he finds everything okay.

Regards...
Prafulla . . .