[U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end

[Matej Frančeškin]

Timeout variable is decremented once more when while condition is not met.
Following "if" does not detect correctly that timeout has occurred.
Because of this bug the "usb start" command on AM335X-EVM board did not detect correctly that USB device was not attached.

	timeout = musb_cfg.timeout;
	while (timeout--)
		if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
 			break;
	/* if musb core is not in host mode, then return */
	if (!timeout)
		return -1;


Signed-off-by: Matej Franceskin <Matej.Franceskin at comtrade.com>
CC: Marek Vasut <matex at denx.de>?

---
 drivers/usb/musb/musb_hcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 2df52c1..8d44c46 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -1113,7 +1113,7 @@ int usb_lowlevel_init(void)
 	 * should be a usb device connected.
 	 */
 	timeout = musb_cfg.timeout;
-	while (timeout--)
+	while (--timeout)
 		if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
 			break;
	/* if musb core is not in host mode, then return */
	if (!timeout)
		return -1; 
-- 
1.7.9.5