[U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit

[Mike Frysinger]

On Tuesday 07 August 2012 04:07:43 Bob Liu wrote:
> --- a/arch/blackfin/include/asm/config-pre.h
> +++ b/arch/blackfin/include/asm/config-pre.h
>
>  #define BFIN_BOOT_16HOST_DMA  11      /* boot ldr from 16-bit host dma */
>  #define BFIN_BOOT_8HOST_DMA   12      /* boot ldr from 8-bit host dma */
>  #define BFIN_BOOT_NAND        13      /* boot ldr from nand flash */
> +#define BFIN_BOOT_RSI_MASTER  14      /* boot ldr from rsi */
> +#define BFIN_BOOT_LP_SLAVE    15      /* boot ldr from link port */
> 
>     case BFIN_BOOT_16HOST_DMA: return "16bit dma";
>  	case BFIN_BOOT_8HOST_DMA:  return "8bit dma";
>  	case BFIN_BOOT_NAND:       return "nand flash";
> +	case BFIN_BOOT_RSI_MASTER: return "rsi master";
> +	case BFIN_BOOT_LP_SLAVE:   return "link port slave";
>  	default:                   return "INVALID";
>  	}
>  }

seems like a change that should be by itself, or squashed into the "core bf60x 
support" patch

> --- a/arch/blackfin/include/asm/mach-common/bits/dma.h
> +++ b/arch/blackfin/include/asm/mach-common/bits/dma.h

should be part of the "bf60x dma" patch

> --- a/arch/blackfin/include/asm/mach-common/bits/sdh.h
> +++ b/arch/blackfin/include/asm/mach-common/bits/sdh.h
> --- a/drivers/mmc/bfin_sdh.c
> +++ b/drivers/mmc/bfin_sdh.c

these are about the only changes that should be in this patch, and the subject 
should be:
	Blackfin: rsi: add support for bf60x

> --- a/board/bf609-ezkit/bf609-ezkit.c
> +++ b/board/bf609-ezkit/bf609-ezkit.c
> --- a/include/configs/bf609-ezkit.h
> +++ b/include/configs/bf609-ezkit.h

merge the rsi patch first, then squash this into the bf609-ezkit board patch
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120808/18bba44f/attachment.pgp>