[U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Tom Rini]

On 08/23/2012 06:14 AM, Christian Riesch wrote:
> Hi Tom,
> 
> On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini <trini at ti.com> wrote:
>> - Convert the non-relocation part of board_init_f to spl_board_init,
>>   turn on CONFIG_SPL_BOARD_INIT in the configs.
>> - Remove duplicated code.
>> - Add spl_boot_device() that returns the statically chosen boot device.
>>
>> Signed-off-by: Tom Rini <trini at ti.com>
> [...]
>> diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
>> index 74632e5..46c0bfd 100644
>> --- a/arch/arm/cpu/arm926ejs/davinci/spl.c
>> +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c
>> @@ -21,6 +21,7 @@
>>   * MA 02111-1307 USA
>>   */
>>  #include <common.h>
>> +#include <spl.h>
>>  #include <asm/u-boot.h>
>>  #include <asm/utils.h>
>>  #include <nand.h>
>> @@ -29,14 +30,7 @@
>>  #include <malloc.h>
>>  #include <spi_flash.h>
>>
>> -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
>> -
>> -DECLARE_GLOBAL_DATA_PTR;
>> -/* Define global data structure pointer to it*/
>> -static gd_t gdata __attribute__ ((section(".data")));
>> -static bd_t bdata __attribute__ ((section(".data")));
>> -
>> -#else
>> +#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT
>>
>>  void puts(const char *str)
>>  {
>> @@ -54,43 +48,37 @@ void putc(char c)
>>
>>  #endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
>>
>> -inline void hang(void)
>> -{
>> -       puts("### ERROR ### Please RESET the board ###\n");
>> -       for (;;)
>> -               ;
>> -}
>> -
>>  void board_init_f(ulong dummy)
>>  {
>> +       /* First, perform our low-level init. */
>>  #ifdef CONFIG_SOC_DM365
>>         dm36x_lowlevel_init(0);
>>  #endif
>>  #ifdef CONFIG_SOC_DA8XX
>>         arch_cpu_init();
>>  #endif
>> -       relocate_code(CONFIG_SPL_STACK, NULL, CONFIG_SPL_TEXT_BASE);
>> +
>> +       /*
>> +        * Next we call relocate_code() with relocation target same as the
>> +        * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
>> +        * skipped. Instead, only .bss initialization will happen.
>> +        */
>> +       relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
>>  }
>>
>> -void board_init_r(gd_t *id, ulong dummy)
>> +void spl_board_init(void)
>>  {
>> -#ifdef CONFIG_SPL_NAND_LOAD
>> -       nand_init();
>> -       puts("Nand boot...\n");
>> -       nand_boot();
>> -#endif
>> -#ifdef CONFIG_SPL_SPI_LOAD
>> -       mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN,
>> -                       CONFIG_SYS_MALLOC_LEN);
>> -
>> -       gd = &gdata;
>> -       gd->bd = &bdata;
>> -       gd->flags |= GD_FLG_RELOC;
>> -       gd->baudrate = CONFIG_BAUDRATE;
>> -       serial_init();          /* serial communications setup */
>> -       gd->have_console = 1;
>> +       preloader_console_init();
>> +}
>>
>> -       puts("SPI boot...\n");
>> -       spi_boot();
>> +u32 spl_boot_device(void)
>> +{
>> +#ifdef CONFIG_SPL_NAND_LOAD
>> +       return BOOT_DEVICE_NAND;
>> +#elif defined(CONFIG_SPL_SPI_LOAD)
>> +       return BOOT_DEVICE_SPI;
>> +#else
> 
> This will not apply on u-boot-ti since it is missing the MMC-SPL
> patches that have already been merged, right?

Indeed, there will be a certain amount of merge-pain I will have to deal
with to get this to apply.  There's also conflicts with some of the
am33xx enhancements there or that I plan to push there shortly.

-- 
Tom