[U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs

Stefano Babic sbabic at denx.de
Fri Aug 17 12:46:12 CEST 2012


On 15/08/2012 08:38, Terry Lv wrote:
> Apply new mxc_spi version configs to other soc configs.
> 
> Signed-off-by: Terry Lv <r65388 at freescale.com>
> ---
>  arch/arm/include/asm/arch-mx31/imx-regs.h |    4 ++++
>  include/configs/efikamx.h                 |    4 ++++
>  include/configs/flea3.h                   |    3 +++
>  include/configs/imx31_litekit.h           |    5 +++++
>  include/configs/imx31_phycore.h           |    4 ++++
>  include/configs/mx31ads.h                 |    4 ++++
>  include/configs/mx31pdk.h                 |    4 ++++
>  include/configs/mx35pdk.h                 |    8 +++++++-
>  include/configs/mx51evk.h                 |    4 ++++
>  include/configs/qong.h                    |    4 ++++
>  include/configs/tt01.h                    |    5 +++++
>  11 files changed, 48 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
> index 0147920..4f9c78c 100644
> --- a/arch/arm/include/asm/arch-mx31/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
> @@ -24,6 +24,10 @@
>  #ifndef __ASM_ARCH_MX31_IMX_REGS_H
>  #define __ASM_ARCH_MX31_IMX_REGS_H
>  
> +#define CSPI1_BASE_ADDR	0x43fa4000
> +#define CSPI2_BASE_ADDR	0x50010000
> +#define CSPI3_BASE_ADDR	0x53f84000
> +
>  #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
>  #include <asm/types.h>
>  
> diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
> index a07c8b5..1fe558d 100644
> --- a/include/configs/efikamx.h
> +++ b/include/configs/efikamx.h
> @@ -99,6 +99,10 @@
>  
>  #define CONFIG_HARD_SPI
>  #define CONFIG_MXC_SPI
> +#define CONFIG_SPI_VER_2_3	1
> +#define CONFIG_CSPI1_BASE_ADDR	CSPI1_BASE_ADDR
> +#define CONFIG_CSPI2_BASE_ADDR	CSPI2_BASE_ADDR
> +#define CONFIG_CSPI3_BASE_ADDR	CSPI3_BASE_ADDR

These are not configurable. If a board is a MX5, they are fixed from
imx-regs.h. See also my previous answer to Patch 2/3.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list