[U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro

[Stefano Babic]

On 21/08/2012 22:01, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Use IMX_GPIO_NR macro.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v1:
> - Remove unnecessary comment
>  board/freescale/mx53loco/mx53loco.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index 7cfb3f4..3a39c3e 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -42,7 +42,7 @@
>  #include <linux/fb.h>
>  #include <ipu_pixfmt.h>
>  
> -#define MX53LOCO_LCD_POWER		(2 * 32 + 24)	/* GPIO3_24 */
> +#define MX53LOCO_LCD_POWER		IMX_GPIO_NR(3, 24)
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> 

Applied (whole series) to u-boot-imx (after removing "Use IMX_GPIO_NR
macro." as suggested by Troy), thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================