[U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts

[Marek Vasut]

The mtd name of the NAND in Linux is "gpmi-nand", not "gpmi-nand.0" as
it would be expected, since the controller doesn't support multiple NANDs
attached to it as of now. Rectify this flub by adjusting default mtdparts.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Otavio Salvador <otavio at ossystems.com.br>
---
 include/configs/m28evk.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index d5cd5a8..40df437 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -172,9 +172,9 @@
 #define	CONFIG_LZO
 #define	CONFIG_MTD_DEVICE
 #define	CONFIG_MTD_PARTITIONS
-#define	MTDIDS_DEFAULT			"nand0=gpmi-nand.0"
+#define	MTDIDS_DEFAULT			"nand0=gpmi-nand"
 #define	MTDPARTS_DEFAULT			\
-	"mtdparts=gpmi-nand.0:"			\
+	"mtdparts=gpmi-nand:"			\
 		"3m(bootloader)ro,"		\
 		"512k(environment),"		\
 		"512k(redundant-environment),"	\
-- 
1.7.10.4