[U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards
Stefano Babic
sbabic at denx.de
Sat Aug 18 17:50:47 CEST 2012
On 17/08/2012 20:19, Matt Sealey wrote:
> Change summary:
>
> * Use iomux-mx51.h include to simplify board configuration.
> * Remove LED toggle function as it had no real users.
> * Red LED is now on for pre-reloc, Blue LED for "in U-Boot"
> * Function renames for readability.
> * Some board identification string changes
> * Reduce CPU core voltage to 1.1V (per TO3 spec)
> * Implicitly remove support for TO2 boards
>
> Signed-off-by: Matt Sealey <matt at genesi-usa.com>
> ---
Hi Matt,
> board/genesi/mx51_efikamx/efikamx.c | 611 +++++++++++++----------------------
> 1 file changed, 230 insertions(+), 381 deletions(-)
>
> diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
> index 12371c9..16e877f 100644
> --- a/board/genesi/mx51_efikamx/efikamx.c
> +++ b/board/genesi/mx51_efikamx/efikamx.c
> @@ -1,7 +1,7 @@
> /*
> + * Copyright (C) 2009 Freescale Semiconductor, Inc.
> * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
> - *
> - * (C) Copyright 2009 Freescale Semiconductor, Inc.
> + * Copyright (C) 2009-2012 Genesi USA, Inc.
> *
> * See file CREDITS for list of people who contributed to this
> * project.
> @@ -24,9 +24,7 @@
>
> #include <common.h>
> #include <asm/io.h>
> -#include <asm/arch/imx-regs.h>
> -#include <asm/arch/mx5x_pins.h>
> -#include <asm/arch/iomux.h>
> +#include <asm/arch/iomux-mx51.h>
> #include <asm/gpio.h>
> #include <asm/errno.h>
> #include <asm/arch/sys_proto.h>
> @@ -48,16 +46,12 @@ DECLARE_GLOBAL_DATA_PTR;
> #endif
>
> /*
> - * Shared variables / local defines
> + * Board revisions
> + *
> + * Note that we get these revisions here for convenience, but we only set
> + * up for the production model Smarttop (1.3) and Smartbook (2.0).
> + *
> */
> -/* LED */
> -#define EFIKAMX_LED_BLUE 0x1
> -#define EFIKAMX_LED_GREEN 0x2
> -#define EFIKAMX_LED_RED 0x4
> -
> -void efikamx_toggle_led(uint32_t mask);
> -
> -/* Board revisions */
> #define EFIKAMX_BOARD_REV_11 0x1
> #define EFIKAMX_BOARD_REV_12 0x2
> #define EFIKAMX_BOARD_REV_13 0x3
> @@ -69,66 +63,67 @@ void efikamx_toggle_led(uint32_t mask);
> /*
> * Board identification
> */
> -u32 get_efikamx_rev(void)
> +static u32 get_mx_rev(void)
> {
> u32 rev = 0;
> /*
> * Retrieve board ID:
> - * rev1.1: 1,1,1
> - * rev1.2: 1,1,0
> - * rev1.3: 1,0,1
> - * rev1.4: 1,0,0
> + *
> + * gpio: 16 17 11
> + * ==============
> + * r1.1: 1+ 1 1
> + * r1.2: 1 1 0
> + * r1.3: 1 0 1
> + * r1.4: 1 0 0
> + *
> + * + note: r1.1 does not strap this pin properly so it needs to
> + * be hacked or ignored.
> */
> - mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
> - /* set to 1 in order to get correct value on board rev1.1 */
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1);
> +
> + /* set to 1 in order to get correct value on board rev 1.1 */
> + gpio_direction_output(GPIO_NUMBER(3, 16), 1);
> + gpio_direction_input(GPIO_NUMBER(3, 11));
> + gpio_direction_input(GPIO_NUMBER(3, 16));
> + gpio_direction_input(GPIO_NUMBER(3, 17));
>
> - mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU);
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
> - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0;
> -
> - mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU);
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
> - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1;
> -
> - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU);
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3));
> - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2;
> + rev |= (!!gpio_get_value(GPIO_NUMBER(3, 16))) << 0;
> + rev |= (!!gpio_get_value(GPIO_NUMBER(3, 17))) << 1;
> + rev |= (!!gpio_get_value(GPIO_NUMBER(3, 11))) << 2;
>
> return (~rev & 0x7) + 1;
> }
>
> -inline u32 get_efikasb_rev(void)
> +static iomux_v3_cfg_t efikasb_revision_pads[] = {
> + MX51_PAD_EIM_CS3__GPIO2_28,
> + MX51_PAD_EIM_CS4__GPIO2_29,
> +};
> +
> +static inline u32 get_sb_rev(void)
> {
> u32 rev = 0;
>
> - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO);
> - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU);
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3));
> - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0;
> -
> - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO);
> - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU);
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4));
> - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1;
> + imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads, ARRAY_SIZE(efikasb_revision_pads));
> + gpio_direction_input(GPIO_NUMBER(2, 28));
> + gpio_direction_input(GPIO_NUMBER(2, 29));
> +
> + rev |= (!!gpio_get_value(GPIO_NUMBER(2, 28))) << 0;
> + rev |= (!!gpio_get_value(GPIO_NUMBER(2, 29))) << 1;
>
> return rev;
> }
>
> -inline uint32_t get_efika_rev(void)
> +inline uint32_t get_efikamx_rev(void)
> {
> - if (machine_is_efikamx())
> - return get_efikamx_rev();
> - else
> - return get_efikasb_rev();
> + if (machine_is_efikamx()) {
> + return get_mx_rev();
> + } else if (machine_is_efikasb()) {
> + return get_sb_rev();
> + }
> }
>
> u32 get_board_rev(void)
> {
> - return get_cpu_rev() | (get_efika_rev() << 8);
> + return get_cpu_rev() | (get_efikamx_rev() << 8);
> }
>
> /*
> @@ -137,66 +132,35 @@ u32 get_board_rev(void)
> int dram_init(void)
> {
> /* dram_init must store complete ramsize in gd->ram_size */
> - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
> - PHYS_SDRAM_1_SIZE);
> + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
> return 0;
> }
>
> /*
> * UART configuration
> */
> -static void setup_iomux_uart(void)
> -{
> - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
> -
> - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
> - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
> - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
> - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
> -}
> +static iomux_v3_cfg_t efikamx_uart_pads[] = {
> + MX51_PAD_UART1_RXD__UART1_RXD,
> + MX51_PAD_UART1_TXD__UART1_TXD,
> + MX51_PAD_UART1_RTS__UART1_RTS,
> + MX51_PAD_UART1_CTS__UART1_CTS,
> +};
>
> /*
> * SPI configuration
> */
> -#ifdef CONFIG_MXC_SPI
> -static void setup_iomux_spi(void)
> -{
> - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
> - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
> - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -
> - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
> - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
> - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -
> - /* Configure SS0 as a GPIO */
> - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0);
> -
> - /* Configure SS1 as a GPIO */
> - mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
> -
> - /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
> - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY,
> - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
> -
> - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
> - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
> - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -}
> -#else
> -static inline void setup_iomux_spi(void) { }
> -#endif
> +static iomux_v3_cfg_t efikamx_spi_pads[]= {
> + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
> + MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
> + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
> + MX51_PAD_CSPI1_SS0__GPIO4_24,
> + MX51_PAD_CSPI1_SS1__GPIO4_25,
> + MX51_PAD_GPIO1_6__GPIO1_6,
> +};
> +
> +#define EFIKAMX_SPI_SS0 GPIO_NUMBER(4, 24)
> +#define EFIKAMX_SPI_SS1 GPIO_NUMBER(4, 25)
> +#define EFIKAMX_PMIC_IRQ GPIO_NUMBER(1, 6)
>
> /*
> * PMIC configuration
> @@ -226,7 +190,7 @@ static void power_init(void)
>
> /* Set core voltage to 1.1V */
> pmic_reg_read(p, REG_SW_0, &val);
> - val = (val & ~SWx_VOLT_MASK) | SWx_1_200V;
> + val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
> pmic_reg_write(p, REG_SW_0, val);
>
> /* Setup VCC (SW2) to 1.25 */
> @@ -301,29 +265,64 @@ static inline void power_init(void) { }
> * MMC configuration
> */
> #ifdef CONFIG_FSL_ESDHC
> +
> struct fsl_esdhc_cfg esdhc_cfg[2] = {
> {MMC_SDHC1_BASE_ADDR, 1},
> {MMC_SDHC2_BASE_ADDR, 1},
> };
>
> -static inline uint32_t efika_mmc_cd(void)
> +static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
> + MX51_PAD_SD1_CMD__SD1_CMD,
> + MX51_PAD_SD1_CLK__SD1_CLK,
> + MX51_PAD_SD1_DATA0__SD1_DATA0,
> + MX51_PAD_SD1_DATA1__SD1_DATA1,
> + MX51_PAD_SD1_DATA2__SD1_DATA2,
> + MX51_PAD_SD1_DATA3__SD1_DATA3,
> + MX51_PAD_GPIO1_1__SD1_WP,
> +};
> +
> +#define EFIKAMX_SDHC1_WP GPIO_NUMBER(1,1)
> +
> +static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
> + MX51_PAD_GPIO1_0__SD1_CD,
> + MX51_PAD_EIM_CS2__SD1_CD,
> +};
> +
> +#define EFIKAMX_SDHC1_CD GPIO_NUMBER(1,0)
> +#define EFIKASB_SDHC1_CD GPIO_NUMBER(2,27)
> +
> +static iomux_v3_cfg_t efikasb_sdhc2_pads[] = {
> + MX51_PAD_SD2_CMD__SD2_CMD,
> + MX51_PAD_SD2_CLK__SD2_CLK,
> + MX51_PAD_SD2_DATA0__SD2_DATA0,
> + MX51_PAD_SD2_DATA1__SD2_DATA1,
> + MX51_PAD_SD2_DATA2__SD2_DATA2,
> + MX51_PAD_SD2_DATA3__SD2_DATA3,
> + MX51_PAD_GPIO1_7__SD2_WP,
> + MX51_PAD_GPIO1_8__SD2_CD,
> +};
> +
> +#define EFIKASB_SDHC2_CD GPIO_NUMBER(1,8)
> +#define EFIKASB_SDHC2_WP GPIO_NUMBER(1,7)
> +
> +static inline uint32_t efikamx_mmc_getcd(u32 base)
> {
> - if (machine_is_efikamx())
> - return MX51_PIN_GPIO1_0;
> - else
> - return MX51_PIN_EIM_CS2;
> + if (base == MMC_SDHC1_BASE_ADDR) {
> + if (machine_is_efikamx()) {
> + return EFIKAMX_SDHC1_CD;
> + } else {
> + return EFIKASB_SDHC1_CD;
> + }
> + } else {
> + return EFIKASB_SDHC2_CD;
> + }
> }
>
> int board_mmc_getcd(struct mmc *mmc)
> {
> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> - uint32_t cd = efika_mmc_cd();
> - int ret;
> -
> - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
> - ret = !gpio_get_value(IOMUX_TO_GPIO(cd));
> - else
> - ret = !gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
> + uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
> + int ret = !gpio_get_value(cd);
>
> return ret;
> }
> @@ -331,214 +330,73 @@ int board_mmc_getcd(struct mmc *mmc)
> int board_mmc_init(bd_t *bis)
> {
> int ret;
> - uint32_t cd = efika_mmc_cd();
> -
> - /* SDHC1 is used on all revisions, setup control pins first */
> - mxc_request_iomux(cd,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(cd,
> - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> - PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
> - PAD_CTL_ODE_OPENDRAIN_NONE |
> - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> - mxc_request_iomux(MX51_PIN_GPIO1_1,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
> - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
> - PAD_CTL_SRE_FAST);
> -
> - gpio_direction_input(IOMUX_TO_GPIO(cd));
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
> -
> - /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
> - if (machine_is_efikasb() || (machine_is_efikamx() &&
> - (get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
> - /* SDHC1 IOMUX */
> - mxc_request_iomux(MX51_PIN_SD1_CMD,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_CLK,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
> - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> - /* SDHC2 IOMUX */
> - mxc_request_iomux(MX51_PIN_SD2_CMD,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD2_CLK,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - /* SDHC2 Control lines IOMUX */
> - mxc_request_iomux(MX51_PIN_GPIO1_7,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_GPIO1_7,
> - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> - PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
> - PAD_CTL_ODE_OPENDRAIN_NONE |
> - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> - mxc_request_iomux(MX51_PIN_GPIO1_8,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_GPIO1_8,
> - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
> - PAD_CTL_SRE_FAST);
> -
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
> - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7));
> -
> - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> - if (!ret)
> - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
> - } else { /* New boards use only SDHC1 */
> - /* SDHC1 IOMUX */
> - mxc_request_iomux(MX51_PIN_SD1_CMD,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_CLK,
> - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> - mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
> - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
> - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> +
> + /*
> + * All Efika MX boards use eSDHC1 with a common write-protect GPIO
> + */
> + imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads, ARRAY_SIZE(efikamx_sdhc1_pads));
> + gpio_direction_input(EFIKAMX_SDHC1_WP);
> +
> + /*
> + * Smartbook and Smarttop differ on the location of eSDHC1 carrier-detect GPIO
> + */
> + if (machine_is_efikamx()) {
> + imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
> + gpio_direction_input(EFIKAMX_SDHC1_CD);
> + } else if (machine_is_efikasb()) {
> + imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
> + gpio_direction_input(EFIKASB_SDHC1_CD);
> }
> +
> + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> +
> + if (machine_is_efikasb()) {
>
> + imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads, ARRAY_SIZE(efikasb_sdhc2_pads));
> + gpio_direction_input(EFIKASB_SDHC2_CD);
> + gpio_direction_input(EFIKASB_SDHC2_WP);
> + if (!ret)
> + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
> + }
> +
> return ret;
> }
> #endif
>
> /*
> - * ATA
> + * PATA
> */
> -#ifdef CONFIG_MX51_PATA
> -#define ATA_PAD_CONFIG (PAD_CTL_DRV_HIGH | PAD_CTL_DRV_VOT_HIGH)
> -void setup_iomux_ata(void)
> -{
> - mxc_request_iomux(MX51_PIN_NANDF_ALE, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_ALE, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_RE_B, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_WE_B, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_CLE, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_CLE, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_RB0, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_RB0, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_WP_B, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_GPIO_NAND, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_GPIO_NAND, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_RB1, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_RB1, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D0, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D0, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D1, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D1, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D2, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D2, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D3, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D3, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D4, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D4, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D5, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D5, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D6, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D6, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D7, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D7, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D8, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D10, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D11, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D12, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D12, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D13, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D14, ATA_PAD_CONFIG);
> - mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT1);
> - mxc_iomux_set_pad(MX51_PIN_NANDF_D15, ATA_PAD_CONFIG);
> -}
> -#else
> -static inline void setup_iomux_ata(void) { }
> -#endif
> +static iomux_v3_cfg_t efikamx_pata_pads[] = {
> + MX51_PAD_NANDF_WE_B__PATA_DIOW,
> + MX51_PAD_NANDF_RE_B__PATA_DIOR,
> + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
> + MX51_PAD_NANDF_CLE__PATA_RESET_B,
> + MX51_PAD_NANDF_WP_B__PATA_DMACK,
> + MX51_PAD_NANDF_RB0__PATA_DMARQ,
> + MX51_PAD_NANDF_RB1__PATA_IORDY,
> + MX51_PAD_GPIO_NAND__PATA_INTRQ,
> + MX51_PAD_NANDF_CS2__PATA_CS_0,
> + MX51_PAD_NANDF_CS3__PATA_CS_1,
> + MX51_PAD_NANDF_CS4__PATA_DA_0,
> + MX51_PAD_NANDF_CS5__PATA_DA_1,
> + MX51_PAD_NANDF_CS6__PATA_DA_2,
> + MX51_PAD_NANDF_D15__PATA_DATA15,
> + MX51_PAD_NANDF_D14__PATA_DATA14,
> + MX51_PAD_NANDF_D13__PATA_DATA13,
> + MX51_PAD_NANDF_D12__PATA_DATA12,
> + MX51_PAD_NANDF_D11__PATA_DATA11,
> + MX51_PAD_NANDF_D10__PATA_DATA10,
> + MX51_PAD_NANDF_D9__PATA_DATA9,
> + MX51_PAD_NANDF_D8__PATA_DATA8,
> + MX51_PAD_NANDF_D7__PATA_DATA7,
> + MX51_PAD_NANDF_D6__PATA_DATA6,
> + MX51_PAD_NANDF_D5__PATA_DATA5,
> + MX51_PAD_NANDF_D4__PATA_DATA4,
> + MX51_PAD_NANDF_D3__PATA_DATA3,
> + MX51_PAD_NANDF_D2__PATA_DATA2,
> + MX51_PAD_NANDF_D1__PATA_DATA1,
> + MX51_PAD_NANDF_D0__PATA_DATA0,
> +};
>
> /*
> * EHCI USB
> @@ -551,57 +409,55 @@ static inline void setup_iomux_usb(void) { }
>
> /*
> * LED configuration
> + *
> + * Smarttop LED pad config is done in the DCD
> + *
> */
> -void setup_iomux_led(void)
> -{
> - if (machine_is_efikamx()) {
> - /* Blue LED */
> - mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
> -
> - /* Green LED */
> - mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
> +#define EFIKAMX_LED_BLUE GPIO_NUMBER(3, 13)
> +#define EFIKAMX_LED_GREEN GPIO_NUMBER(3, 14)
> +#define EFIKAMX_LED_RED GPIO_NUMBER(3, 15)
>
> - /* Red LED */
> - mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
> - } else {
> - /* CAPS-LOCK LED */
> - mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0);
> -
> - /* ALARM-LED LED */
> - mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO);
> - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
> - }
> -}
> +static iomux_v3_cfg_t efikasb_led_pads[] = {
> + MX51_PAD_GPIO1_3__GPIO1_3,
> + MX51_PAD_EIM_CS0__GPIO2_25,
> +};
>
> -void efikamx_toggle_led(uint32_t mask)
> -{
> - if (machine_is_efikamx()) {
> - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
> - mask & EFIKAMX_LED_BLUE);
> - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
> - mask & EFIKAMX_LED_GREEN);
> - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
> - mask & EFIKAMX_LED_RED);
> - } else {
> - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0),
> - mask & EFIKAMX_LED_BLUE);
> - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3),
> - !(mask & EFIKAMX_LED_GREEN));
> - }
> -}
> +#define EFIKASB_CAPSLOCK_LED GPIO_NUMBER(2, 25)
> +#define EFIKASB_MESSAGE_LED GPIO_NUMBER(1, 3) /* Note: active low */
>
> /*
> * Board initialization
> */
> int board_early_init_f(void)
> {
> - setup_iomux_uart();
> - setup_iomux_spi();
> - setup_iomux_led();
> + if (machine_is_efikasb()) {
> + imx_iomux_v3_setup_multiple_pads(efikasb_led_pads, ARRAY_SIZE(efikasb_led_pads));
> + gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
> + gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
> + } else if (machine_is_efikamx()) {
> + /*
> + * Set up GPIO directions for LEDs.
> + * IOMUX has been done in the DCD already.
> + * Turn the red LED on for pre-relocation code.
> + */
> + gpio_direction_output(EFIKAMX_LED_BLUE, 0);
> + gpio_direction_output(EFIKAMX_LED_GREEN, 0);
> + gpio_direction_output(EFIKAMX_LED_RED, 1);
> + }
> +
> + /*
> + * Both these pad configurations for UART and SPI are kind of redundant
> + * since they are the Power-On Defaults for the i.MX51. But, it seems we
> + * should make absolutely sure that they are set up correctly.
> + */
> + imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads, ARRAY_SIZE(efikamx_uart_pads));
> + imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads, ARRAY_SIZE(efikamx_spi_pads));
> +
> + /* not technically required for U-Boot operation but set it up anyway. */
> + gpio_direction_input(EFIKAMX_PMIC_IRQ);
> + /* Deselect both CS for now.. any other way and NOR doesn't probe properly. */
> + gpio_direction_output(EFIKAMX_SPI_SS0, 0);
> + gpio_direction_output(EFIKAMX_SPI_SS1, 1);
>
> return 0;
> }
> @@ -609,49 +465,42 @@ int board_early_init_f(void)
> int board_init(void)
> {
> gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> -
> +
> return 0;
> }
>
> int board_late_init(void)
> {
> - setup_iomux_spi();
> -
> + if (machine_is_efikamx()) {
> + /*
> + * Set up Blue LED for "In U-Boot" status.
> + * We're all relocated and ready to U-Boot!
> + */
> + gpio_set_value(EFIKAMX_LED_RED, 0);
> + gpio_set_value(EFIKAMX_LED_GREEN, 0);
> + gpio_set_value(EFIKAMX_LED_BLUE, 1);
> + }
> +
> power_init();
>
> - setup_iomux_led();
> - setup_iomux_ata();
> + imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads, ARRAY_SIZE(efikamx_pata_pads));
> setup_iomux_usb();
>
> if (machine_is_efikasb())
> setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
>
> - setup_iomux_led();
> -
> - efikamx_toggle_led(EFIKAMX_LED_BLUE);
> -
> return 0;
> }
>
> int checkboard(void)
> {
> - u32 rev = get_efika_rev();
> + u32 rev = get_efikamx_rev();
>
> + printf("Board: Genesi Efika MX ");
> if (machine_is_efikamx()) {
> - printf("Board: Efika MX, rev1.%i\n", rev & 0xf);
> - return 0;
> - } else {
> - switch (rev) {
> - case EFIKASB_BOARD_REV_13:
> - printf("Board: Efika SB rev1.3\n");
> - break;
> - case EFIKASB_BOARD_REV_20:
> - printf("Board: Efika SB rev2.0\n");
> - break;
> - default:
> - printf("Board: Efika SB, rev Unknown\n");
> - break;
> - }
> + printf("Smarttop (1.%i)\n", rev & 0xf);
> + } else if (machine_is_efikasb()) {
> + printf("Smartbook\n");
> }
>
> return 0;
>
In principle I am fine with this patch - ok, I read also the other
comments and I can tell you my opinion.
Generally, we have patches for each issues. But everything here concerns
only the efika boards and only a single file was changed, and changes
are described in the commit message. We have also other examples doing
the same, if we check in the git history. And as single patch, we konw
that it is surely bisectable.
Regarding if it is better to set a single pad array or use an array for
each single peripheral, well, this is a question of taste. When one
choose one of them, the choice should be consistent, but both choices
are praticable and have advantages and disadvantages.
Anyway, who will maintain the efikas in future ? Marek, do you hold it,
or Matt will take this job ? In last case I would like to see a patch
for the MAINTAINER file.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list