[U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()
Marek Vasut
marex at denx.de
Wed Aug 8 12:52:18 CEST 2012
Kill multiple occurances and redeclaration of xstr in favor of __stringify().
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
---
include/configs/MPC8308RDB.h | 9 +++------
include/configs/amcc-common.h | 25 +++++++++++-------------
include/configs/at91sam9263ek.h | 5 +----
include/configs/cam_enc_4xx.h | 36 +++++++++++++++++------------------
include/configs/ea20.h | 11 ++++-------
include/configs/enbw_cmc.h | 19 ++++++++----------
include/configs/flea3.h | 14 ++++++--------
include/configs/ima3-mx53.h | 10 ++++------
include/configs/imx27lite-common.h | 15 ++++++---------
include/configs/km/keymile-common.h | 13 +++++--------
include/configs/km/km-powerpc.h | 12 ++++++------
include/configs/km/km_arm.h | 14 +++++++-------
include/configs/manroland/common.h | 21 +++++++++-----------
include/configs/mpc8308_p1m.h | 9 +++------
include/configs/mx35pdk.h | 14 ++++++--------
include/configs/qong.h | 9 +++------
include/configs/tam3517-common.h | 11 ++++-------
include/configs/tx25.h | 5 +----
18 files changed, 104 insertions(+), 148 deletions(-)
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 7f2761c..a2716aa 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -525,9 +525,6 @@
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
@@ -561,10 +558,10 @@
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"bootcmd=run flash_self\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
" +${filesize};cp.b ${fileaddr} " \
- xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
#endif /* __CONFIG_H */
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 056a22a..9d0c80b 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -189,14 +189,11 @@
#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
#endif
-#define xstr(s) str(s)
-#define str(s) #s
-
/*
* General common environment variables shared on all AMCC eval boards
*/
#define CONFIG_AMCC_DEF_ENV \
- "netdev=" xstr(CONFIG_USE_NETDEV) "\0" \
+ "netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -204,15 +201,15 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs}" \
- " console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0" \
+ " console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \
CONFIG_ADDMISC \
"initrd_high=30000000\0" \
"kernel_addr_r=1000000\0" \
"fdt_addr_r=1800000\0" \
"ramdisk_addr_r=1900000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
CONFIG_AMCC_DEF_ENV_ROOTPATH
/*
@@ -234,7 +231,7 @@
"net_self=run net_self_load;" \
"run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
- "fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"
+ "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
/*
* Default environment for arch/ppc booting,
@@ -263,15 +260,15 @@
"bootm ${kernel_addr_r}\0"
#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp 200000 ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
- "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
- "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
+ "era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
+ "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
- "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
+ "u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
"nload=tftp 200000 ${u-boot-nand}\0" \
"nupdate=nand erase 0 100000;nand write 200000 0 100000\0" \
"nupd=run nload nupdate\0"
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 4309f71..34fa3e2 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -157,11 +157,8 @@
/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_SIZE 0x10000
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- "monitor_base=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
+ "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
"update=" \
"protect off ${monitor_base} +${filesize};" \
"erase ${monitor_base} +${filesize};" \
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 771ac9c..30ca4c8 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -403,8 +403,6 @@
/*
* Default environment settings
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define DVN4XX_UBOOT_ADDR_R_RAM 0x80000000
/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */
@@ -416,22 +414,22 @@
#define DVN4XX_UBOOT_ADDR_R_UBOOT 0x80003800
#define CONFIG_EXTRA_ENV_SETTINGS \
- "u_boot_addr_r=" xstr(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.ubl\0" \
+ "u_boot_addr_r=" __stringify(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.ubl\0" \
"load=tftp ${u_boot_addr_r} ${u-boot}\0" \
- "pagesz=" xstr(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \
+ "pagesz=" __stringify(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \
"writeheader=nandrbl rbl;nand erase 20000 ${pagesz};" \
"nand write ${u_boot_addr_r} 20000 ${pagesz};" \
"nandrbl uboot\0" \
"writenand_spl=nandrbl rbl;nand erase 0 3000;" \
- "nand write " xstr(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
+ "nand write " __stringify(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
" 0 3000;nandrbl uboot\0" \
"writeuboot=nandrbl uboot;" \
- "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
- ";nand write " xstr(DVN4XX_UBOOT_ADDR_R_UBOOT) \
- " " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
+ "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
+ __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
+ ";nand write " __stringify(DVN4XX_UBOOT_ADDR_R_UBOOT) \
+ " " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
"update=run load writenand_spl writeuboot\0" \
"bootcmd=run net_nfs\0" \
"rootpath=/opt/eldk-arm/arm\0" \
@@ -448,14 +446,14 @@
"rootpath=/opt/eldk-arm/arm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
"kernel_addr_r=80600000\0" \
"load_kernel=tftp ${kernel_addr_r} ${bootfile}\0" \
"ubi_load_kernel=ubi part ubi 2048;ubifsmount ${img_volume};" \
"ubifsload ${kernel_addr_r} boot/uImage\0" \
- "fit_addr_r=" xstr(CONFIG_BOARD_IMG_ADDR_R) "\0" \
- "img_addr_r=" xstr(CONFIG_BOARD_IMG_ADDR_R) "\0" \
- "img_file=" xstr(CONFIG_HOSTNAME) "/ait.itb\0" \
+ "fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
+ "img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
+ "img_file=" __stringify(CONFIG_HOSTNAME) "/ait.itb\0" \
"header_addr=20000\0" \
"img_writeheader=nandrbl rbl;" \
"nand erase ${header_addr} ${pagesz};" \
@@ -464,11 +462,11 @@
"img_writespl=nandrbl rbl;nand erase 0 3000;" \
"nand write ${img_addr_r} 0 3000;nandrbl uboot\0" \
"img_writeuboot=nandrbl uboot;" \
- "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
+ "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
+ __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
";nand write ${img_addr_r} " \
- xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
"img_writedfenv=ubi part ubi 2048;" \
"ubi write ${img_addr_r} default ${filesize}\0" \
"img_volume=rootfs1\0" \
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index a9caa81..6dec8b5 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -230,9 +230,6 @@
* Default environment and default scripts
* to update uboot and load kernel
*/
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_HOSTNAME ea20
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -263,9 +260,9 @@
"loadaddr=c0000014\0" \
"memory=32M\0" \
"kernel_addr_r=c0700000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
"flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
@@ -282,7 +279,7 @@
"ubifsload ${kernel_addr_r} /boot/uImage;" \
"ubifsumount; run nandargs addip addtty " \
"addmtd addmisc addmem;bootm ${kernel_addr_r}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load_magic=if sf probe 0;then sf " \
"read c0000000 0x10000 0x60000;fi\0" \
"load_nand=ubi part nand0,${as};ubifsmount rootfs;" \
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 3fc07e6..fb5f8ae 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -183,18 +183,15 @@
#define CONFIG_DEFAULT_SETTINGS_ADDR (CONFIG_ENV_ADDR_REDUND + \
CONFIG_ENV_SECT_SIZE)
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"u-boot_addr_r=c0000000\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize};"\
- "erase " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
- "cp.b ${u-boot_addr_r} " xstr(CONFIG_SYS_FLASH_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};"\
+ "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
+ "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \
" ${filesize};" \
- "protect on " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\
+ "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\
"netdev=eth0\0" \
"rootpath=/opt/eldk-arm/arm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -206,9 +203,9 @@
"kernel_addr_r=c0700000\0" \
"fdt_addr_r=c0600000\0" \
"ramdisk_addr_r=c0b00000\0" \
- "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
- xstr(CONFIG_HOSTNAME) ".dtb\0" \
- "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
+ "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \
+ __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
"nand_ld_ramdsk=nand read ${ramdisk_addr_r} 320000 400000\0" \
"nand_ld_kernel=nand read ${kernel_addr_r} 20000 300000\0" \
"nand_ld_fdt=nand read ${fdt_addr_r} 0 2000\0" \
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index e8e3c6a..110e509 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -233,8 +233,6 @@
* Default environment and default scripts
* to update uboot and load kernel
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define CONFIG_HOSTNAME flea3
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -247,16 +245,16 @@
":${hostname}:${netdev}:off panic=1\0" \
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
"addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
+ "else run addip_sta;fi\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addtty=setenv bootargs ${bootargs}" \
" console=ttymxc2,${baudrate}\0" \
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"loadaddr=80800000\0" \
"kernel_addr_r=80800000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
@@ -270,9 +268,9 @@
"run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
"else echo Images not loades;fi\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
+ "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
"update=protect off ${uboot_addr} +40000;" \
"erase ${uboot_addr} +40000;" \
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index 17fa4a1..d6182f5 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -184,8 +184,6 @@
*/
#define HOSTNAME ima3-mx53
-#define xstr(s) str(s)
-#define str(s) #s
#define CONFIG_HOSTNAME ima3-mx53
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -207,9 +205,9 @@
"loadaddr=70800000\0" \
"kernel_addr_r=70800000\0" \
"ramdisk_addr_r=71000000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
"mmcargs=setenv bootargs root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"mmcroot=/dev/mmcblk0p3 rw\0" \
@@ -238,7 +236,7 @@
"run satargs addip addtty addmtd addmisc;" \
"sata init;ext2load sata 0:1 ${kernel_addr_r} " \
"${satafile};bootm\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.imx\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \
"uimage=uImage\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"uboot_addr=0xf0001000\0" \
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 7d2876b..6194147 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -200,9 +200,6 @@
#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -215,19 +212,19 @@
" console=ttymxc0,${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"kernel_addr_r=a0800000\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
"rootpath=/opt/eldk-4.2-arm/arm\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty addmtd addmisc;" \
"bootm\0" \
- "bootcmd=run net_nfs\0" \
+ "bootcmd=run net_nfs\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
" +${filesize};cp.b ${fileaddr} " \
- xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 7ed9958..2bfde98 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -149,9 +149,6 @@
"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
-#define xstr(s) str(s)
-#define str(s) #s
-
/*
* boottargets
* - set 'subbootcmds'
@@ -188,7 +185,7 @@
":${hostname}:${netdev}:off3" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
" mem=${kernelmem} init=${init}" \
- " phram.phram=phvar,${varaddr}," xstr(CONFIG_KM_PHRAM) \
+ " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
" " CONFIG_KM_UBI_LINUX_MTD " " \
CONFIG_KM_DEF_BOOT_ARGS_CPU \
"\0" \
@@ -213,9 +210,9 @@
* - 'cramfsloadfdt': copy fdt from a cramfs to ram
*/
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
- "cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
+ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \
"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \
- "ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \
+ "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
@@ -228,7 +225,7 @@
#define CONFIG_KM_DEF_ENV_CONSTANTS \
"backup_bank=0\0" \
"release=run newenv; reset\0" \
- "pnvramsize=" xstr(CONFIG_KM_PNVRAM) "\0" \
+ "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \
"testbootcmd=setenv boot_bank ${test_bank}; " \
"run ${subbootcmds}; reset\0" \
""
@@ -253,7 +250,7 @@
"saveenv && saveenv && boot\0" \
"bootlimit=3\0" \
"init=/sbin/init-overlay.sh\0" \
- "load_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
+ "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
"load=tftpboot ${load_addr_r} ${u-boot}\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 506755b..bd5bdbc 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -80,14 +80,14 @@
"cramfsloadfdt=" \
"cramfsload ${fdt_addr_r} " \
"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \
- "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \
- "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
+ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"update=" \
- "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\
- "erase " xstr(BOOTFLASH_START) " +${filesize} && " \
- "cp.b ${load_addr_r} " xstr(BOOTFLASH_START) \
+ "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
+ "erase " __stringify(BOOTFLASH_START) " +${filesize} && "\
+ "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START) \
" ${filesize} && " \
- "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
+ "protect on " __stringify(BOOTFLASH_START) " +${filesize}\0"\
""
#endif /* __CONFIG_KEYMILE_POWERPC_H */
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 3aa5ca1..fd20a12 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -87,7 +87,7 @@
#define CONFIG_KM_DEF_ENV_CPU \
"boot=bootm ${load_addr_r} - -\0" \
"cramfsloadfdt=true\0" \
- "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
+ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
CONFIG_KM_UPDATE_UBOOT \
""
@@ -268,16 +268,16 @@ int get_scl(void);
#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_NEW_ENV \
"newenv=sf probe 0;" \
- "sf erase " xstr(CONFIG_ENV_OFFSET) " " \
- xstr(CONFIG_ENV_TOTAL_SIZE)"\0"
+ "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \
+ __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
#else
#define CONFIG_KM_NEW_ENV \
"newenv=setenv addr 0x100000 && " \
"i2c dev 1; mw.b ${addr} 0 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"
+ "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \
+ "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
#endif
/*
diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h
index 797378b..2e43403 100644
--- a/include/configs/manroland/common.h
+++ b/include/configs/manroland/common.h
@@ -70,9 +70,6 @@
#undef CONFIG_BOOTARGS
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -85,29 +82,29 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"kernel_addr=ff810000\0" \
- "fdt_addr="xstr(CONFIG_SYS_FLASH_BASE)"\0" \
+ "fdt_addr="__stringify(CONFIG_SYS_FLASH_BASE)"\0" \
"flash_nfs=run nfsargs addip addcon addwdt addlog;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"kernel_addr_r=300000\0" \
"fdt_addr_r=200000\0" \
- "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
- xstr(CONFIG_HOSTNAME) ".dtb\0" \
- "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
+ "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \
+ __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
"load_fdt=tftp ${fdt_addr_r} ${fdt_file};\0" \
"load_kernel=tftp ${kernel_addr_r} ${kernel_file};\0" \
"addcon=setenv bootargs ${bootargs} console=ttyPSC0,${baudrate}\0"\
"net_nfs=run load_fdt load_kernel; " \
"run nfsargs addip addcon addwdt addlog;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin \0" \
"u-boot_addr_r=200000\0" \
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize};" \
- "erase " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize};" \
- "cp.b ${u-boot_addr_r} " xstr(CONFIG_SYS_TEXT_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
+ "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
+ "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_TEXT_BASE) \
" ${filesize};" \
- "protect on " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize}\0" \
+ "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize}\0"\
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 806ed64..035a1b6 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -506,9 +506,6 @@
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
@@ -542,10 +539,10 @@
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"bootcmd=run flash_self\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
" +${filesize};cp.b ${fileaddr} " \
- xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
#endif /* __CONFIG_H */
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index f930ed0..ccccf2e 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -251,8 +251,6 @@
* Default environment and default scripts
* to update uboot and load kernel
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define CONFIG_HOSTNAME "mx35pdk"
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -266,16 +264,16 @@
":${hostname}:${netdev}:off panic=1\0" \
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
"addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
+ "else run addip_sta;fi\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addtty=setenv bootargs ${bootargs}" \
" console=ttymxc0,${baudrate}\0" \
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"loadaddr=80800000\0" \
"kernel_addr_r=80800000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
@@ -285,9 +283,9 @@
"bootm ${kernel_addr_r}\0" \
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
+ "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
"update=protect off ${uboot_addr} +40000;" \
"erase ${uboot_addr} +40000;" \
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
diff --git a/include/configs/qong.h b/include/configs/qong.h
index e824e17..d5cb9f6 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -146,9 +146,6 @@
#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -178,10 +175,10 @@
"bootm\0" \
"bootcmd=run flash_self\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
" +${filesize};cp.b ${fileaddr} " \
- xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
"videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000," \
"le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296," \
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 24f6f7e..6a3aa3e 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -300,9 +300,6 @@
"1m(u-boot),256k(env1)," \
"256k(env2),6m(kernel),-(rootfs)"
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_TAM3517_SETTINGS \
"netdev=eth0\0" \
"nandargs=setenv bootargs root=${nandroot} " \
@@ -322,8 +319,8 @@
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"loadaddr=82000000\0" \
"kernel_addr_r=82000000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
@@ -338,10 +335,10 @@
"run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
"else echo Images not loades;fi\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"loadmlo=tftp ${loadaddr} ${mlo}\0" \
- "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \
+ "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \
"uboot_addr=0x80000\0" \
"update=nandecc sw;nand erase ${uboot_addr} 100000;" \
"nand write ${loadaddr} ${uboot_addr} 80000\0" \
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 6821528..5fe2265 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -148,9 +148,6 @@
#define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -164,7 +161,7 @@
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs}\0" \
"u-boot=tx25/u-boot.bin\0" \
- "kernel_addr_r=" xstr(CONFIG_LOADADDR) "\0" \
+ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"hostname=tx25\0" \
"bootfile=tx25/uImage\0" \
"rootpath=/opt/eldk/arm\0" \
--
1.7.10.4
More information about the U-Boot
mailing list