[U-Boot] [PATCH v2] powerpc/p1_p2_rdb_pc: print -PC suffix in board name

[Scott Wood]

Currently the -PC variants of the P1/P2 RDB boards do not print it on boot --
e.g. a P2020RDB-PC will claim to be a plain P2020RDB.  Besides being incorrect,
this can confuse a user into building U-Boot for P2020RDB rather than P2020RDB-PC,
resulting in a board that does not boot.

P1024RDB and P1025RDB are not included, as these boards apparently do not
have -PC as part of their name, even though they are supported by p1_p2_rdb_pc.

The P2020RDB variant covered by this is apparently P2020RDB-PCA rather
than P2020RDB-PC.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
v2: s/P2020RDB-PC/P2020RDB-PCA/ as Sean Geary pointed out to me.  It
looks like P2020RDB-PC itself might be supported by the old P2020RDB
platform, but it's not clear what the actual differences are beyond
different DDR (which we should be able to deal with dynamically). 
Documentation is difficult to come by, even within Freescale.

Perhaps we should remove the old P1_P2_RDB platform unless we can figure
out what it's supposed to be supporting and if it is succeeding at doing
so.  It seems to be bitrotting -- lots of differences compared to
p1_p2_rdb_pc that have nothing to do with differences between the boards. 
Even the target name capitalization is inconsistent. :-).

 include/configs/p1_p2_rdb_pc.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index a8882d4..b18f4a0 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -31,7 +31,7 @@
 #endif
 
 #if defined(CONFIG_P1020MBG)
-#define CONFIG_BOARDNAME "P1020MBG"
+#define CONFIG_BOARDNAME "P1020MBG-PC"
 #define CONFIG_P1020
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SLIC
@@ -41,7 +41,7 @@
 #endif
 
 #if defined(CONFIG_P1020UTM)
-#define CONFIG_BOARDNAME "P1020UTM"
+#define CONFIG_BOARDNAME "P1020UTM-PC"
 #define CONFIG_P1020
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe0
@@ -49,7 +49,7 @@
 #endif
 
 #if defined(CONFIG_P1020RDB)
-#define CONFIG_BOARDNAME "P1020RDB"
+#define CONFIG_BOARDNAME "P1020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
 #define CONFIG_SPI_FLASH
@@ -64,7 +64,7 @@
 #endif
 
 #if defined(CONFIG_P1021RDB)
-#define CONFIG_BOARDNAME "P1021RDB"
+#define CONFIG_BOARDNAME "P1021RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1021
 #define CONFIG_QE
@@ -111,7 +111,7 @@
 #endif
 
 #if defined(CONFIG_P2020RDB)
-#define CONFIG_BOARDNAME "P2020RDB"
+#define CONFIG_BOARDNAME "P2020RDB-PCA"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P2020
 #define CONFIG_SPI_FLASH
-- 
1.7.9.5