[U-Boot] [PATCH 8/9 V2] EXYNOS: Add clock for I2S
Rajeshwari Shinde
rajeshwari.s at samsung.com
Wed Aug 22 08:44:24 CEST 2012
This patch adds clock support for I2S
Signed-off-by: R. Chandrasekar <rcsekar at samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
Changes in V2:
- None
arch/arm/cpu/armv7/exynos/clock.c | 119 ++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-exynos/clk.h | 3 +
arch/arm/include/asm/arch-exynos/clock.h | 29 +++++++
3 files changed, 151 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 44dff2b..691f6d4 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -26,6 +26,16 @@
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
+/* Epll Clock division values to achive different frequency output */
+static struct st_epll_con_val epll_div[] = {
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 180000000, 0, 45, 3, 1, 0 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 67737600, 1, 90, 4, 3, 20762 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 45158400, 0, 45, 3, 3, 10381 },
+ { 180633600, 0, 45, 3, 1, 10381 }
+};
/* exynos4: return pll clock frequency */
static unsigned long exynos4_get_pll_clk(int pllreg)
{
@@ -848,6 +858,92 @@ static int exynos5_spi_set_clock_rate(enum periph_id periph_id,
return 0;
}
+int exynos5_clock_epll_set_rate(unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int lockcnt;
+ unsigned int start;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ epll_con = readl(&clk->epll_con0);
+ epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
+ EPLL_CON0_LOCK_DET_EN_SHIFT) |
+ EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
+ EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT |
+ EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i].freq_out == rate)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(epll_div))
+ return -1;
+
+ epll_con_k = epll_div[i].k_dsm << 0;
+ epll_con |= epll_div[i].en_lock_det << EPLL_CON0_LOCK_DET_EN_SHIFT;
+ epll_con |= epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT;
+ epll_con |= epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT;
+ epll_con |= epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT;
+
+ /*
+ * Required period ( in cycles) to genarate a stable clock output.
+ * The maximum clock time can be up to 3000 * PDIV cycles of PLLs
+ * frequency input (as per spec)
+ */
+ lockcnt = 3000 * epll_div[i].p_div;
+
+ writel(lockcnt, &clk->epll_lock);
+ writel(epll_con, &clk->epll_con0);
+ writel(epll_con_k, &clk->epll_con1);
+
+ start = get_timer(0);
+
+ while (!(readl(&clk->epll_con0) &
+ (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
+ if (get_timer(start) > TIMEOUT_EPLL_LOCK) {
+ debug("%s: Timeout waiting for EPLL lock\n", __func__);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+void exynos5_clock_select_i2s_clk_source(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+}
+
+int exynos5_clock_set_i2s_clk_prescaler(unsigned int src_frq,
+ unsigned int dst_frq)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int div;
+
+ if ((dst_frq == 0) || (src_frq == 0)) {
+ debug("%s: Invalid requency input for prescaler\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+
+ div = (src_frq / dst_frq);
+ if (div > AUDIO_1_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+ (div & AUDIO_1_RATIO_MASK));
+ return 0;
+}
+
unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5())
@@ -927,3 +1023,26 @@ int spi_set_clock_rate(enum periph_id periph_id, unsigned int rate)
else
return 0;
}
+
+int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq)
+{
+
+ if (cpu_is_exynos5())
+ return exynos5_clock_set_i2s_clk_prescaler(src_frq, dst_frq);
+ else
+ return 0;
+}
+
+void clock_select_i2s_clk_source(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_clock_select_i2s_clk_source();
+}
+
+int clock_epll_set_rate(unsigned long rate)
+{
+ if (cpu_is_exynos5())
+ return exynos5_clock_epll_set_rate(rate);
+ else
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 4e51402..f32c634 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -41,4 +41,7 @@ unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
void set_mipi_clk(void);
int spi_set_clock_rate(enum periph_id periph_id, unsigned int rate);
+void clock_select_i2s_clk_source(void);
+int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq);
+int clock_epll_set_rate(unsigned long rate);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h
index fce38ef..1df49a9 100644
--- a/arch/arm/include/asm/arch-exynos/clock.h
+++ b/arch/arm/include/asm/arch-exynos/clock.h
@@ -595,9 +595,38 @@ struct exynos5_clock {
unsigned int pll_div2_sel;
unsigned char res123[0xf5d8];
};
+
+/* structure for epll configuration used in audio clock configuration */
+struct st_epll_con_val {
+ unsigned int freq_out; /* frequency out */
+ unsigned int en_lock_det; /* enable lock detect */
+ unsigned int m_div; /* m divider value */
+ unsigned int p_div; /* p divider value */
+ unsigned int s_div; /* s divider value */
+ unsigned int k_dsm; /* k value of delta signal modulator */
+};
#endif
#define MPLL_FOUT_SEL_SHIFT 4
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/
+#define TIMEOUT_EPLL_LOCK 1000
+
+#define AUDIO_0_RATIO_MASK 0x0f
+#define AUDIO_1_RATIO_MASK 0x0f
+
+#define AUDIO1_SEL_MASK 0xf
+#define CLK_SRC_SCLK_EPLL 0x7
+
+/* CON0 bit-fields */
+#define EPLL_CON0_MDIV_MASK 0x1ff
+#define EPLL_CON0_PDIV_MASK 0x3f
+#define EPLL_CON0_SDIV_MASK 0x7
+#define EPLL_CON0_MDIV_SHIFT 16
+#define EPLL_CON0_PDIV_SHIFT 8
+#define EPLL_CON0_SDIV_SHIFT 0
+#define EPLL_CON0_LOCK_DET_EN_SHIFT 28
+#define EPLL_CON0_LOCK_DET_EN_MASK 1
+
#define MPLL_FOUT_SEL_MASK 0x1
#define BPLL_FOUT_SEL_SHIFT 0
#define BPLL_FOUT_SEL_MASK 0x1
--
1.7.4.4
More information about the U-Boot
mailing list