[U-Boot] Please pull u-boot-staging/trini at ti.com

[Tom Rini]

Hello Albert and Wolfgang,

To try and ease the backlog of ARM changes, I've taken the liberty of
grabbing the Snowball and Raspberry Pi model B board support patches and
putting them into the staging tree.  Both of these series have been
posted for some time and been reviewed.  Wolfgang, if you would like to
wait for Albert to pick up this request, that's fine.  I just wanted to
make sure the submitters weren't left waiting.  Thanks!

The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

  zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to bcf2c9ef2877440033e3032fbd597be32728020c:

  ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-10 08:57:29 -0700)

----------------------------------------------------------------
John Rigby (1):
      u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
      snowball: Add support for ux500 based snowball board
      u8500: Moving prcmu to cpu directory
      snowball: Adding architecture dependent initialisation
      snowball: Adding CPU clock initialisation
      snowball: Moving to ux500.v2 addess scheme for PRCMU access
      snowball: applying power to LAN and GBF controllers
      u8500: Moving processor-specific functions to cpu area.
      u8500: Enabling power to MMC device on AB8500 V2
      armv7: Adding cpu specific cache managmenent
      snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
      README: fix references to config_cmd_default.h
      ARM: arm1176: enable instruction cache in arch_cpu_init()
      ARM: add basic support for the Broadcom BCM2835 SoC
      ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745 ++++++++++++++++++++
 board/st-ericsson/snowball/snowball.c              |  348 +++++++++
 board/st-ericsson/u8500/Makefile                   |    2 +-
 board/st-ericsson/u8500/u8500_href.c               |   99 +--
 boards.cfg                                         |    2 +
 drivers/gpio/Makefile                              |    2 +
 drivers/gpio/bcm2835_gpio.c                        |   89 +++
 drivers/gpio/db8500_gpio.c                         |  221 ++++++
 drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
 drivers/mmc/arm_pl180_mmci.h                       |   27 +-
 drivers/serial/serial_pl01x.c                      |    2 +
 include/configs/rpi_b.h                            |  104 +++
 include/configs/snowball.h                         |  266 +++++++
 39 files changed, 2937 insertions(+), 212 deletions(-)
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c
 create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
 rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%)
 create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h
 rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%)
 create mode 100644 board/raspberrypi/rpi_b/Makefile
 create mode 100644 board/raspberrypi/rpi_b/rpi_b.c
 create mode 100644 board/st-ericsson/snowball/Makefile
 create mode 100644 board/st-ericsson/snowball/db8500_pins.h
 create mode 100644 board/st-ericsson/snowball/snowball.c
 create mode 100644 drivers/gpio/bcm2835_gpio.c
 create mode 100644 drivers/gpio/db8500_gpio.c
 create mode 100644 include/configs/rpi_b.h
 create mode 100644 include/configs/snowball.h

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120810/c57e26e6/attachment.pgp>