[U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board

[Tom Rini]

On Tue, Jul 31, 2012 at 12:59:22PM -0600, mathieu.poirier at linaro.org wrote:

> From: "Mathieu J. Poirier" <mathieu.poirier at linaro.org>
> 
> This set adds support for the ST-Ericsson u8500 based
> snowball board.  Doing so it moves u8500-href code around
> to allow for code reuse between boards.
> 
> It was sent out during the 12.07 cycle but never received
> an official ACK.
> 
> John Rigby (1):
>   u8500: Separating mmc config parameters from driver
> 
> Mathieu J. Poirier (10):
>   snowball: Add support for ux500 based snowball board
>   u8500: Moving prcmu to cpu directory
>   snowball: Adding architecture dependent initialisation
>   snowball: Adding CPU clock initialisation
>   snowball: Moving to ux500.v2 addess scheme for PRCMU access
>   snowball: applying power to LAN and GBF controllers
>   u8500: Moving processor-specific functions to cpu area.
>   u8500: Enabling power to MMC device on AB8500 V2
>   armv7: Adding cpu specific cache managmenent
>   snowball: Adding board specific cache cleanup routine
> 
>  MAINTAINERS                                     |    4 +
>  arch/arm/cpu/armv7/cpu.c                        |    8 +
>  arch/arm/cpu/armv7/u8500/Makefile               |    2 +-
>  arch/arm/cpu/armv7/u8500/clock.c                |   34 +
>  arch/arm/cpu/armv7/u8500/cpu.c                  |  192 ++++++
>  arch/arm/cpu/armv7/u8500/prcmu.c                |  229 +++++++
>  arch/arm/include/asm/arch-u8500/clock.h         |    5 +-
>  arch/arm/include/asm/arch-u8500/db8500_gpio.h   |   42 ++
>  arch/arm/include/asm/arch-u8500/db8500_pincfg.h |  170 +++++
>  arch/arm/include/asm/arch-u8500/hardware.h      |   33 +-
>  arch/arm/include/asm/arch-u8500/prcmu.h         |   76 +++
>  arch/arm/include/asm/arch-u8500/sys_proto.h     |    1 +
>  board/armltd/vexpress/ca9x4_ct_vxp.c            |   21 +-
>  board/st-ericsson/snowball/Makefile             |   51 ++
>  board/st-ericsson/snowball/db8500_pins.h        |  745 +++++++++++++++++++++++
>  board/st-ericsson/snowball/snowball.c           |  367 +++++++++++
>  board/st-ericsson/u8500/Makefile                |    2 +-
>  board/st-ericsson/u8500/prcmu-fw.h              |   55 --
>  board/st-ericsson/u8500/prcmu.c                 |  165 -----
>  board/st-ericsson/u8500/u8500_href.c            |   99 +---
>  boards.cfg                                      |    1 +
>  drivers/gpio/Makefile                           |    1 +
>  drivers/gpio/db8500_gpio.c                      |  225 +++++++
>  drivers/mmc/arm_pl180_mmci.c                    |  132 ++---
>  drivers/mmc/arm_pl180_mmci.h                    |   27 +-
>  drivers/serial/serial_pl01x.c                   |    2 +
>  include/configs/snowball.h                      |  268 ++++++++
>  27 files changed, 2566 insertions(+), 391 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
>  create mode 100644 arch/arm/cpu/armv7/u8500/prcmu.c
>  create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h
>  create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h
>  create mode 100644 arch/arm/include/asm/arch-u8500/prcmu.h
>  create mode 100644 board/st-ericsson/snowball/Makefile
>  create mode 100644 board/st-ericsson/snowball/db8500_pins.h
>  create mode 100644 board/st-ericsson/snowball/snowball.c
>  delete mode 100644 board/st-ericsson/u8500/prcmu-fw.h
>  delete mode 100644 board/st-ericsson/u8500/prcmu.c
>  create mode 100644 drivers/gpio/db8500_gpio.c
>  create mode 100644 include/configs/snowball.h

With a few very minor changes that I've sent to the list, I've applied
this to u-boot-staging/trini at ti.com, thanks for your patience!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120810/fe882ba2/attachment.pgp>