[U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash

[Bo Shen]

Hi Andreas,

On 8/16/2012 12:44, Bo Shen wrote:
> This series patches enable at91sam9x5 boot from serial flash
>
> Bo Shen (3):
>    spi: add atmel at25db321 serial flash support
>    arm : at91sam9x5 : enable serial flash boot
>    arm : at91sam9x5 : make nand available when not boot from nand
>

Please don't take this serial patches.
I found the spi only works at 1MHz speed which is too slow.
I will resend it let it work at a higher speed.

BRs,
Bo Shen

>   arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |    4 ++--
>   board/atmel/at91sam9x5ek/at91sam9x5ek.c          |    2 ++
>   boards.cfg                                       |    1 +
>   drivers/mtd/spi/atmel.c                          |   10 ++++++++++
>   include/configs/at91sam9x5ek.h                   |   18 ++++++++++++++----
>   5 files changed, 29 insertions(+), 6 deletions(-)
>