[U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash

[Andreas Bießmann]

Hi Bo,

On 16.08.2012 09:14, Bo Shen wrote:
> Hi Andreas,
> 
> On 8/16/2012 12:44, Bo Shen wrote:
>> This series patches enable at91sam9x5 boot from serial flash
>>
>> Bo Shen (3):
>>    spi: add atmel at25db321 serial flash support
>>    arm : at91sam9x5 : enable serial flash boot
>>    arm : at91sam9x5 : make nand available when not boot from nand
>>
> 
> Please don't take this serial patches.
> I found the spi only works at 1MHz speed which is too slow.
> I will resend it let it work at a higher speed.

Ok, please split 2/3 into a 'fix spi' and a 'enable spi for <board>'

Best regards

Andreas Bießmann