[U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support

[Heiko Schocher]

Hello Stefano,

On 28.08.2012 09:46, Stefano Babic wrote:
> Signed-off-by: Stefano Babic<sbabic at denx.de>
> ---
>   board/teejet/mt_ventoux/mt_ventoux.c |   91 ++++++++++++++++++++++++++++++++++
>   board/teejet/mt_ventoux/mt_ventoux.h |    2 +-
>   include/configs/mt_ventoux.h         |   16 ++++++
>   3 files changed, 108 insertions(+), 1 deletion(-)
>
> diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
> index 814e72f..a2bda4b 100644
> --- a/board/teejet/mt_ventoux/mt_ventoux.c
> +++ b/board/teejet/mt_ventoux/mt_ventoux.c
> @@ -21,13 +21,17 @@
>
>   #include<common.h>
>   #include<netdev.h>
> +#include<malloc.h>
>   #include<fpga.h>
> +#include<video_fb.h>
>   #include<asm/io.h>
>   #include<asm/arch/mem.h>
>   #include<asm/arch/mux.h>
>   #include<asm/arch/sys_proto.h>
>   #include<asm/omap_gpio.h>
>   #include<asm/arch/mmc_host_def.h>
> +#include<asm/arch/dss.h>
> +#include<asm/arch/clocks.h>
>   #include<i2c.h>
>   #include<spartan3.h>
>   #include<asm/gpio.h>
> @@ -53,6 +57,50 @@ DECLARE_GLOBAL_DATA_PTR;
>   #define FPGA_INIT	119
>   #define FPGA_DONE	154
>
> +#define LCD_PWR		138
> +#define LCD_PON_PIN	139
> +
> +#if defined(CONFIG_VIDEO)&&  !defined(CONFIG_SPL_BUILD)
> +static struct {
> +	u32 xres;
> +	u32 yres;
> +} panel_resolution[] = {
> +	{ 480, 272 },
> +	{ 800, 480 }
> +};
> +
> +static struct panel_config lcd_cfg[] = {
> +	{
> +	.timing_h       =  ((4 /* hpb */ - 1)<<  20) |
> +			((8 /*hfp */- 1)<<  8) |
> +			(41 /* hsw */ - 1), /* Horizontal timing */

Could we use here a define, something like this:

#define PANEL_TIMING_H(bp, fp, sw) (((bp - 1) << 20) | ((fp - 1) << 8) | (sw - 1))

                 .panel_config = {
                         .timing_h       = PANEL_TIMING_H(4, 8, 41),

> +	.timing_v       = (2 /*vbp */<<  24) |
                                          ^^
                                          Is this correct? In the manual I
                                          see for the timing H and V settings
                                          the same bitpositions!

> +			(4 /* vfp */<<  8) |
> +			(10 - 1), /* Vertical timing */

#define PANEL_TIMING_V(bp, fp, sw) (((bp) << 20) | ((fp) << 8) | (sw - 1))

and here too ?

> +	.pol_freq       = 0x00000000, /* Pol Freq */
> +	.divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
> +	.panel_type     = 0x01, /* TFT */
> +	.data_lines     = 0x03, /* 24 Bit RGB */
> +	.load_mode      = 0x02, /* Frame Mode */
> +	.panel_color	= 0,
> +	},
> +	{
> +	.timing_h       =  ((20 /* hpb */ - 1)<<  20) |
> +			((192 /*hfp */- 1)<<  8) |
> +			(4 /* hsw */ - 1), /* Horizontal timing */

and here ...

> +	.timing_v       = (2 /*vbp */<<  24) |
> +			(20 /* vfp */<<  8) |
> +			(10 /* vsw */ - 1), /* Vertical timing */

and here.

> +	.pol_freq       = 0x00004000, /* Pol Freq */
> +	.divisor        = 0x0001000E, /* 36Mhz Pixel Clock */
> +	.panel_type     = 0x01, /* TFT */
> +	.data_lines     = 0x03, /* 24 Bit RGB */
> +	.load_mode      = 0x02, /* Frame Mode */
> +	.panel_color	= 0,
> +	}
> +};
> +#endif
[...]

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany