[U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.
Andreas Bießmann
andreas.devel at googlemail.com
Wed Aug 1 22:59:10 CEST 2012
Dear Markus Hubig,
On 01.08.12 21:57, Markus Hubig wrote:
> This adds support for the AT91SAM9G20 boards by taskit GmbH.
> Both boards, Stamp9G20 and PortuxG20, are integrated in one
> file. PortuxG20 is basically a SBC built around the Stamp9G20.
>
> Signed-off-by: Markus Hubig <mhubig at imko.de>
> Cc: Andreas Bießmann <andreas.devel at googlemail.com>
> ---
> MAINTAINERS | 4 +
> board/taskit/stamp9g20/Makefile | 52 +++++++++
> board/taskit/stamp9g20/stamp9g20.c | 185 ++++++++++++++++++++++++++++++
> boards.cfg | 2 +
> include/configs/stamp9g20.h | 216 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 459 insertions(+), 0 deletions(-)
> create mode 100644 board/taskit/stamp9g20/Makefile
> create mode 100644 board/taskit/stamp9g20/stamp9g20.c
> create mode 100644 include/configs/stamp9g20.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 84413de..649436d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -243,6 +243,10 @@ Klaus Heydeck <heydeck at kieback-peter.de>
> KUP4K MPC855
> KUP4X MPC859
>
> +Markus Hubig <mhubig at imko.de>
> +
> + STAMP9G20 ARM926EJS
> +
> Ilko Iliev <iliev at ronetix.at>
unfortunately Ilko Iliev is wrong here ... this is the PPC section (all
these MPCxx). About line 566 begins the ARM section.
>
> PM9261 AT91SAM9261
> diff --git a/board/taskit/stamp9g20/Makefile b/board/taskit/stamp9g20/Makefile
> new file mode 100644
> index 0000000..e99bfaa
> --- /dev/null
> +++ b/board/taskit/stamp9g20/Makefile
> @@ -0,0 +1,52 @@
> +#
> +# (C) Copyright 2003-2008
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# (C) Copyright 2008
> +# Stelian Pop <stelian at popies.net>
> +# Lead Tech Design <www.leadtechdesign.com>
> +#
> +# (C) Copyright 2012
> +# Markus Hubig <mhubig at imko.de>
> +# IMKO GmbH <www.imko.de>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS-y += stamp9g20.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS-y))
> +SOBJS := $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB): $(obj).depend $(OBJS) $(SOBJS)
> + $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c
> new file mode 100644
> index 0000000..afb9449
> --- /dev/null
> +++ b/board/taskit/stamp9g20/stamp9g20.c
> @@ -0,0 +1,185 @@
> +/*
> + * (C) Copyright 2007-2008
> + * Stelian Pop <stelian at popies.net>
> + * Lead Tech Design <www.leadtechdesign.com>
> + *
> + * Achim Ehrlich <aehrlich at taskit.de>
> + * taskit GmbH <www.taskit.de>
> + *
> + * (C) Copyright 2012-
> + * Markus Hubig <mhubig at imko.de>
> + * IMKO GmbH <www.imko.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/at91sam9260_matrix.h>
> +#include <asm/arch/at91sam9_smc.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/gpio.h>
> +#include <watchdog.h>
> +#include <net.h>
> +#include <netdev.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static void stamp9G20_nand_hw_init(void)
> +{
> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
> + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
> + unsigned long csa;
> +
> + /* Assign CS3 to NAND/SmartMedia Interface */
> + csa = readl(&matrix->ebicsa);
> + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
> + writel(csa, &matrix->ebicsa);
> +
> + /* Configure SMC CS3 for NAND/SmartMedia */
> + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
> + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
> + &smc->cs[3].setup);
> + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
> + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
> + &smc->cs[3].pulse);
> + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
> + &smc->cs[3].cycle);
> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
> + AT91_SMC_MODE_EXNW_DISABLE |
> + AT91_SMC_MODE_DBW_8 |
> + AT91_SMC_MODE_TDF_CYCLE(2),
> + &smc->cs[3].mode);
> +
> + /* Configure RDY/BSY */
> + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
> +
> + /* Enable NandFlash */
> + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
> +}
> +
> +static void stamp9G20_macb_hw_init(void)
> +{
> + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
> + struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
> + unsigned long erstl;
> + int timeout = 100;
> +
> + /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */
> + at91_set_gpio_output(AT91_PIN_PA26, 0);
> +
> + /*
> + * Disable pull-up on:
> + * RXDV (PA17) => PHY normal mode (not Test mode)
> + * ERX0 (PA14) => PHY ADDR0
> + * ERX1 (PA15) => PHY ADDR1
> + * ERX2 (PA25) => PHY ADDR2
> + * ERX3 (PA26) => PHY ADDR3
> + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
> + *
> + * PHY has internal pull-down
> + */
> + writel(pin_to_mask(AT91_PIN_PA14) |
> + pin_to_mask(AT91_PIN_PA15) |
> + pin_to_mask(AT91_PIN_PA17) |
> + pin_to_mask(AT91_PIN_PA18) |
> + pin_to_mask(AT91_PIN_PA28),
> + &pioa->pudr);
> +
> + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
> +
> + /* Need to reset PHY -> 500ms reset */
> + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
> + AT91_RSTC_MR_URSTEN, &rstc->mr);
> +
> + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
> +
> + /* Wait for end of hardware reset */
> + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
> +
> + /* avoid shutdown by watchdog */
> + hw_watchdog_reset();
WATCHDOG_RESET();
> +
> + mdelay(10);
> + timeout--;
> +
> + /* timeout for not getting stuck in an endless loop */
> + if (timeout <= 0) {
> + debug("ERROR: Timeout waiting for PHY reset!\n");
Error should always print out.
> + break;
> + };
> + };
> +
> + /* Restore NRST value */
> + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
> + &rstc->mr);
> +
> + /* Re-enable pull-up */
> + writel(pin_to_mask(AT91_PIN_PA14) |
> + pin_to_mask(AT91_PIN_PA15) |
> + pin_to_mask(AT91_PIN_PA17) |
> + pin_to_mask(AT91_PIN_PA18) |
> + pin_to_mask(AT91_PIN_PA28),
> + &pioa->puer);
> +
> + /* Initialize EMAC=MACB hardware */
> + at91_macb_hw_init();
> +}
> +
> +int board_early_init_f(void)
> +{
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> + /* Enable clocks for all PIOs */
> + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
> + (1 << ATMEL_ID_PIOC), &pmc->pcer);
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* adress of boot parameters */
> + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> +
> + at91_set_gpio_output(AT91_PIN_PC9, 1);
> + at91_set_gpio_output(AT91_PIN_PC5, 1);
> +
> + at91_seriald_hw_init();
at least the at91sam9263ek initializes the usart in board_early_init_f
... will check it with at91sam9260ek these days.
> + stamp9G20_nand_hw_init();
> + stamp9G20_macb_hw_init();
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = get_ram_size(
> + (void *)CONFIG_SYS_SDRAM_BASE,
> + CONFIG_SYS_SDRAM_SIZE);
> + return 0;
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> + int rc = 0;
> + return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
> +}
> diff --git a/boards.cfg b/boards.cfg
> index 1af87c0..fd1c8d6 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -120,6 +120,8 @@ cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea
> pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261
> pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263
> pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45
> +portuxg20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20,CONFIG_PORTUXG20
> +stamp9g20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20
> cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx
> da830evm arm arm926ejs da8xxevm davinci davinci
> da850_am18xxevm arm arm926ejs da8xxevm davinci davinci da850evm:DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50
> diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
> new file mode 100644
> index 0000000..b9ca936
> --- /dev/null
> +++ b/include/configs/stamp9g20.h
> @@ -0,0 +1,216 @@
> +/*
> + * (C) Copyright 2007-2008
> + * Stelian Pop <stelian at popies.net>
> + * Lead Tech Design <www.leadtechdesign.com>
> + *
> + * (C) Copyright 2010
> + * Achim Ehrlich <aehrlich at taskit.de>
> + * taskit GmbH <www.taskit.de>
> + *
> + * (C) Copyright 2012
> + * Markus Hubig <mhubig at imko.de>
> + * IMKO GmbH <www.imko.de>
> + *
> + * Configuation settings for the stamp9g20 CPU module.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * SoC must be defined first, before hardware.h is included.
> + * In this case SoC is defined in boards.cfg.
> + */
> +#include <asm/hardware.h>
> +
> +/*
> + * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
> + * program. Since the linker has to swallow that define, we must use a pure
> + * hex number here!
> + */
> +#define CONFIG_SYS_TEXT_BASE 0x23f00000
> +
> +/* ARM asynchronous clock */
> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
> +#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
> +#define CONFIG_SYS_HZ 1000 /* 1ms resolution */
> +
> +/* Misc CPU related settings */
> +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
Commit a21c65115bd95572cc80092a31b0e9ecb8710e9f removes necessity for
this config ... also new to me.
> +#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
> +#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */
> +#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
> +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
> +#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */
> +#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */
> +
> +/* setting the mach type */
> +#ifdef CONFIG_PORTUXG20
> +# define CONFIG_MACH_TYPE MACH_TYPE_PORTUXG20
> +#else
> +# define CONFIG_MACH_TYPE MACH_TYPE_STAMP9G20
> +#endif
> +
> +/*
> + * SDRAM: 1 bank, 64 MB, base address 0x20000000
> + * Already initialized before u-boot gets started.
> + */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
> +#define CONFIG_SYS_SDRAM_SIZE (64 * (1024 << 10))
> +
> +/*
> + * Perform a SDRAM Memtest from the start of SDRAM
> + * till the beginning of the U-Boot position in RAM.
> + */
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN \
> + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
> +
> +/*
> + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
> + * leaving the correct space for initial global data structure above that
> + * address while providing maximum stack area below.
> + */
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
> +
> +/* NAND flash settings */
> +#define CONFIG_NAND_ATMEL
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
> +#define CONFIG_SYS_NAND_DBW_8
> +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
> +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
> +
> +/* general purpose I/O */
> +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
> +#define CONFIG_AT91_GPIO /* enable the GPIO features */
> +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
> +
> +/* serial console */
> +#define CONFIG_ATMEL_USART
> +#define CONFIG_USART_BASE ATMEL_BASE_DBGU
> +#define CONFIG_USART_ID ATMEL_ID_SYS
> +#define CONFIG_BAUDRATE 115200
> +
> +/* Ethernet configuration */
> +#define CONFIG_MACB /* initialize the ethernet port */
> +#define CONFIG_RMII /* use reduced MII inteface */
> +#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
> +
> +/* Enable the watchdog */
> +#define CONFIG_AT91SAM9_WATCHDOG
> +#define CONFIG_HW_WATCHDOG
> +
> +/* USB configuration */
> +#define CONFIG_USB_ATMEL
> +#define CONFIG_USB_OHCI_NEW
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
> +
> +/* BOOTP options */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/* General Boot Parameter */
> +#define CONFIG_BOOTDELAY 3
> +#define CONFIG_BOOTCOMMAND "run flashboot"
> +#define CONFIG_SYS_PROMPT "U-Boot> "
> +#define CONFIG_SYS_CBSIZE 256
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_PBSIZE \
> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> +
> +/*
> + * RAM Memory address where to put the
> + * Linux Kernel bevor starting.
--------------------^
before?
> + */
> +#define CONFIG_SYS_LOAD_ADDR 0x22000000
> +
> +/*
> + * The NAND Flash partitions:
> + * ==========================================
> + * 0x0000000-0x001ffff -> 128k, bootstrap
> + * 0x0020000-0x005ffff -> 256k, u-boot
> + * 0x0060000-0x007ffff -> 128k, env1
> + * 0x0080000-0x009ffff -> 128k, env2 (backup)
> + * 0x0100000-0x06fffff -> 6M, kernel
> + * 0x0700000-0x8000000 -> 121M, RootFS
> + */
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_OFFSET (128 + 256 << 10)
> +#define CONFIG_ENV_OFFSET_REDUND (128 + 256 + 128 << 10)
> +#define CONFIG_ENV_SIZE (128 << 10)
> +
> +/*
> + * Predefined environment variables.
> + * Usefull to define some easy to use boot commands.
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + \
> + "basicargs=console=ttyS0,115200\0" \
> + \
> + "mtdparts=mtdparts=atmel_nand:128k(bootstrap)ro," \
> + "256k(uboot)ro,128k(env1)ro," \
> + "128k(env2)ro,12M(linux),-(root)rw\0" \
your table in comment tells 6MiB for kernel, here you have 12MiB ;)
> + \
> + "sdboot=setenv bootargs ${basicargs} ${mtdparts} " \
> + "root=/dev/mmcblk0p1 rootwait; " \
> + "nand read 0x22000000 0x100000 0x600000; " \
> + "bootm 22000000\0" \
> + \
> + "flashboot=setenv bootargs ${basicargs} ${mtdparts} " \
> + "root=/dev/mtdblock5 rootfstype=jffs2; " \
> + "nand read 0x22000000 0x100000 0x600000; " \
> + "bootm 22000000\0" \
> + \
> + "nfsboot=dhcp; setenv bootargs ${basicargs} ${mtdparts} " \
> + "root=/dev/nfs ip=dhcp; bootm\0"
dhcp command can use some env (I think bootfile) to directely boot. So
setting this env, setting bootargs and then run dhcp would maybe better.
Alternatively the nfsboot could imply a correctly set bootfile, this
could be another env in your EXTRA_ENV_SETTINGS (another side note;).
> +
> +/* Command line & features configuration */
> +#include <config_cmd_default.h>
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_IMLS
> +#undef CONFIG_CMD_LOADS
> +
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +
> +#endif /* __CONFIG_H */
>
We should think about the MACB ifdef stuff again. I learned that the
stamp9g20 is a small device sitting on different base boards. In case of
portux9g20 we will have ethernet. Therefore we should always enable MACB
when we are configured as portux9g20. But if one uses the stamp on
another base board he maybe want to disable ethernet support easily ...
with this information I think it is good to have these ifdef blocks
around all the ethernet stuff. Sorry, I understood this in your last
mail and you sent this patch to fast to comment ...
Best regards
Andreas Bießmann
More information about the U-Boot
mailing list