[U-Boot] Please pull u-boot-ti/master
Tom Rini
trini at ti.com
Fri Aug 3 18:16:26 CEST 2012
Hello,
The following changes since commit 30a5f098e261b00b9c3ce43b8d4a641e106d26a0:
Revert "arm: armv7: add compile option -mno-unaligned-access if available" (2012-07-29 11:19:37 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti master
for you to fetch changes up to c7dd0935555429d46d28ccbb0bde81a3e2f9c86e:
DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-03 09:00:57 -0700)
----------------------------------------------------------------
Chandan Nath (3):
am33xx: CPSW init and definitions
am33xx: pin mux defintions for CPSW switch
am335x_evm: CPSW support
Cyril Chemparathy (1):
cpsw: add driver for cpsw ethernet device
Ilya Yanok (1):
am335x_evm: read the on-board EEPROM
Javier Martinez Canillas (3):
OMAP3: igep00x0: Add config option to choose flash storage memory
OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
OMAP3: igep00x0: add SPL support for IGEP-based boards
Laurence Withers (4):
DaVinci DA8xx: tidy up clock ID definition
DaVinci DA850: UART2 clock ID comes from ASYNC3
DaVinci DA8xx: replace magic number for DDR speed
DaVinci DA8xx: fix set_cpu_clk_info()
Marek Vasut (2):
dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
dm: Move OMAP GPIO driver to drivers/gpio/
Mikhail Kshevetskiy (3):
arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138
arm/davinci/da850: add uart0 pinmux
serial/ns16550: ns16550 has a different register layout on SOC_DA8XX
Peter Meerwald (1):
beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Tom Rini (25):
am33xx: Enable gpio0 clock
am335x_evm: Update config for common usage
am33xx: Remove DMM_BASE define
am33xx: Convert to using <asm/emif.h> to describe the EMIF
am33xx: Remove extra check in enable_ddr_clocks
am33xx: Bugfix to config_sdram()
am33xx: Rework DDR2 EMIF initalization slightly
am33xx: Make config_cmd_ctrl / config_ddr_data take const structs
am33xx: Pass to config_ddr the type of memory that is connected
am33xx: Move the call to ddr_pll_config, make it take the frequency
am33xx: Clean up unused DDR defines, prefix more with 'DDR2'
am33xx: Document what we're doing with ddrctrl->ddrckectrl
am33xx: Turn a number of 'int' functions to 'void'
am33xx: Use emif_regs struct for storing initialization values
am33xx: Rework config_io_ctrl slightly
am33xx: Do not touch 'ratio1' fields
am33xx: Correct and clean up ddr_regs struct
am33xx: Move some variables in emif4.c, mark them static.
am33xx: Rework config_ddr to make DDR3 support easier.
am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support
am33xx: Remove board/ti/am335x/evm.c
am33xx: Add support for TI AM335x StarterKit EVM
am33xx evm: Add CONFIG_CMD_EEPROM and related
am33xx: Rework pinmux functions
doc/git-mailrc: Update 'ti' alias
Vaibhav Bedia (1):
am335x: ddr_defs: Update EMIF parameters
arch/arm/cpu/arm926ejs/davinci/cpu.c | 22 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 5 +
arch/arm/cpu/armv7/am33xx/board.c | 194 +++-
arch/arm/cpu/armv7/am33xx/clock.c | 22 +-
arch/arm/cpu/armv7/am33xx/ddr.c | 87 +-
arch/arm/cpu/armv7/am33xx/emif4.c | 240 +++--
arch/arm/cpu/armv7/omap-common/Makefile | 3 -
arch/arm/include/asm/arch-am33xx/common_def.h | 23 -
arch/arm/include/asm/arch-am33xx/cpu.h | 11 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 184 ++--
arch/arm/include/asm/arch-am33xx/hardware.h | 6 +-
arch/arm/include/asm/arch-am33xx/sys_proto.h | 29 +
arch/arm/include/asm/arch-davinci/hardware.h | 60 +-
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 1 +
arch/arm/include/asm/arch-omap3/mem.h | 29 +
arch/arm/include/asm/emif.h | 8 +-
board/isee/igep0020/config.mk | 33 -
board/isee/igep0020/igep0020.c | 42 +-
board/isee/igep0020/igep0020.h | 4 +
board/isee/igep0030/config.mk | 33 -
board/isee/igep0030/igep0030.c | 42 +-
board/isee/igep0030/igep0030.h | 4 +
board/ti/am335x/Makefile | 4 +-
board/ti/am335x/evm.c | 40 -
board/ti/am335x/mux.c | 87 +-
board/ti/beagle/beagle.c | 4 +
boards.cfg | 6 +-
doc/git-mailrc | 2 +-
drivers/gpio/Makefile | 1 +
.../omap-common/gpio.c => drivers/gpio/omap_gpio.c | 0
drivers/net/Makefile | 1 +
drivers/net/cpsw.c | 991 ++++++++++++++++++++
drivers/serial/ns16550.c | 2 +-
include/configs/am335x_evm.h | 97 +-
include/configs/cm_t35.h | 1 +
include/configs/devkit8000.h | 3 +
include/configs/dig297.h | 1 +
include/configs/igep00x0.h | 85 ++
include/configs/mcx.h | 1 +
include/configs/omap3_beagle.h | 2 +
include/configs/omap3_evm_common.h | 1 +
include/configs/omap3_logic.h | 1 +
include/configs/omap3_mvblx.h | 1 +
include/configs/omap3_overo.h | 2 +
include/configs/omap3_pandora.h | 1 +
include/configs/omap3_zoom2.h | 1 +
include/configs/omap4_common.h | 2 +
include/configs/omap5_evm.h | 1 +
include/configs/tam3517-common.h | 2 +
include/cpsw.h | 51 +
include/ns16550.h | 9 +
52 files changed, 1984 insertions(+), 524 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-am33xx/common_def.h
delete mode 100644 board/isee/igep0020/config.mk
delete mode 100644 board/isee/igep0030/config.mk
delete mode 100644 board/ti/am335x/evm.c
rename arch/arm/cpu/armv7/omap-common/gpio.c => drivers/gpio/omap_gpio.c (100%)
create mode 100644 drivers/net/cpsw.c
create mode 100644 include/cpsw.h
Please note that my tree is based on current u-boot-arm/next and I've
updated my next and master branches to the same content. I also did a
quick test and all of these merge easily onto Wolfgang's current tree.
Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120803/a4e1fe45/attachment.pgp>
More information about the U-Boot
mailing list