[U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro

[Ashok]

 From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <ashokkourla2000 at gmail.com>
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro

Signed-off-by: Ashok Kumar Reddy <ashokkourla2000 at gmail.com>
---
  board/freescale/mx6qarm2/mx6qarm2.c |    4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mx6qarm2/mx6qarm2.c 
b/board/freescale/mx6qarm2/mx6qarm2.c
index 340c4c4..3218993 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc)
  	int ret;

  	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-		gpio_direction_input(171); /*GPIO6_11*/
-		ret = !gpio_get_value(171);
+		gpio_direction_input(IMX_GPIO_NR(6,11));
+		ret = !gpio_get_value(IMX_GPIO_NR(6,11));
  	} else /* Don't have the CD GPIO pin on board */
  		ret = 1;

-- 
1.7.9.5