[U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series

[Igor Grinberg]

On 08/19/12 19:08, Lucas Stach wrote:
> With this series we are able to initialize USB controllers
> using an external ULPI phy AKA USB2 on Tegra 2 devices.
> 
> This was tested to work on a Toradex Colibri T20 board,
> where USB2 is used to access the ASIX ethernet chipset.
> Testing was done with "tegra20: usb: rework set_host_mode"

I'm sorry, I have missed this patch.
Can you please give us a reference to it?

> applied. I did not spot any regressions on the UTMI ports.
> 
> Patchset is based on top of u-boot-tegra/next
> 
> Lucas Stach (3):
>   tegra20: complete periph_id enum
>   tegra20: add clock_set_pllout function
>   tegra20: add USB ULPI init code
> 
>  arch/arm/cpu/armv7/tegra20/usb.c            | 131 +++++++++++++++++++++++++---
>  arch/arm/cpu/tegra20-common/clock.c         |  26 ++++++
>  arch/arm/cpu/tegra20-common/warmboot_avp.c  |   2 +-
>  arch/arm/include/asm/arch-tegra20/clk_rst.h |  11 ++-
>  arch/arm/include/asm/arch-tegra20/clock.h   |  25 ++++++
>  arch/arm/include/asm/arch-tegra20/usb.h     |  29 ++++--
>  6 Dateien geändert, 206 Zeilen hinzugefügt(+), 18 Zeilen entfernt(-)
> 

-- 
Regards,
Igor.