[U-Boot] [PATCH 2/2] vision2: do not overwrite the console

Fabio Estevam festevam at gmail.com
Sun Aug 5 19:31:34 CEST 2012


From: Fabio Estevam <fabio.estevam at freescale.com>

On this board, the console is always set to the serial line.
Do not allow to overwrite it when video is enabled.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/ttcontrol/vision2/vision2.c |   11 +++++++++--
 include/configs/vision2.h         |    2 ++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index d68bef7..d287544 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -674,11 +674,18 @@ int board_late_init(void)
 	udelay(2000);
 #endif
 
-	setenv("stdout", "serial");
-
 	return 0;
 }
 
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
 int checkboard(void)
 {
 	puts("Board: TTControl Vision II CPU V\n");
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 0ed53d2..34fc1cb 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -215,6 +215,8 @@
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_CMD_BMP
-- 
1.7.1



More information about the U-Boot mailing list